similar to: tinc works fine on MacOS 10.5

hi, the following patch adds ssh tun support for Darwin/MacOS X (layer 2+3). I tested it with Darwin 8.0.1 x86 and MacOS X 10.4 Tiger PPC, I would like to see any tests from MacOS X users. It requires an external tun/tap driver, see below. reyk --- README.platform.orig 2006-02-13 20:22:04.000000000 -0800 +++ README.platform 2006-02-13 20:21:45.000000000 -0800 @@ -30,6 +30,18 @@ gcc,

Honestly, I'm probably not the best person to ask this. I really just deal with network performance issues. You should try the OpenSSH development group. I've cc:'d that group on this message. However, a quick look at the code shows that you'd only be getting that warning if both CUSTOM_SYS_TUN_OPEN and SSH_TUN_OPENBSD are not defined. Grep on the first define we find the

My intention is to set up tinc so that I can connect from home to an office network. All CPUs are running MacOs X, 10.2.8 or 10.3.5. I have read the tinc manual, tincd.8 and tinc.conf.5. However, I am still unclear about a few issues. First and foremost, how to I setup the VPN interfaces on the hosts, on MacOs X? Which file do I have to alter and what is the exact syntax on Os X to setup

Hi, is it possible to upgrade a RH EL system with version x to a CentOS system with a version > x? All comments are welcome. Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany --------------------------------------------------

Hi, does Centos-5 support the GFS filesystem and the RedHat cluster suite? I did not find anything in the FAQs. Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone:

Hi, somebody knows how to get gparted for centos-5? Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone: +49-631-205-2438, FAX: +49-631-205-3056

When running "yum update" on monday, oct 22, I get the following conflicts: Transaction Check Error: file /etc/nxserver/node.conf.sample from install of freenx-0.7.1-1.el5.centos conflicts with file from package freenx-0.6.0-12.el5.centos file /usr/bin/nxkeygen from install of freenx-0.7.1-1.el5.centos conflicts with file from package freenx-0.6.0-12.el5.centos file

Hi, is it possible to install ocfs2 in centos-5 without build a new kernel? Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone: +49-631-205-2438, FAX: +49-631-205-3056

Hi, I have a nx question: Somebody knows how to add additional fonts to nx on CentOS? Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone: +49-631-205-2438, FAX: +49-631-205-3056

After playing with conga/luci i'm wondering that it's not possible to reset and/or remove the generated cluster configuration. Somebody knows how to achieve this? I did not find any hint in the RH manuals. Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653

Hi, curently running centos4.4 with a board having promise sata controller. If I try to update to centos-5, the installer hangs up. No problems under centos-4.4. Does somebody know a workaround for this problem? In the mailing list archives I found a similar report, but no solution. Regards -- Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer

Hi, did somebody successfully compile Globus Toolkit 4.0.3 under CenTOS-4.4 from the source installer gt4.0.3-all-source-installer? If yes, with using some special compile controls? Any comments welcome. Regards Joachim Backes <joachim.backes at rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653

Hi, I installed centos-4.4 on x86_64, and I wanted to install nx and freenx from the centos extras. But yum list available '*nx* gives me only yum list available '*nx*' Setting up repositories Reading repository metadata in from local files Available Packages lynx.x86_64 2.8.5-18.2 base Question: How, by using yum, can I install

Hi, having running centOS-4.4 on a really fast machine (16 GB memory, 8 Opteron CPU's, SATA drives). Then making an update by using the Centos-5 CD's. The start was fast, but during update, the installer spents a very, very long wallclock time during selinx updating: for about 1/2 hour the updater runs in a restorecon/find sequence. And at the end, before the MBR is written, it spents

Hi, Starting with http://wiki.centos.org/FAQ/CentOS3 I wanted to test how to migrate my x86_64 machine from in installed RHEL5 (fully updated) to the current CentOS5 without reinstalling. The steps I had to do were: 1. steps in RHEL5: a. yum clean all b. installing RPM-GPG-KEY-CentOS-5.htm from http://mirror.centos.org/centos/ (by rpm) c. installing by rpm from

I configured a tunnel where the server is a CentOS 5 x86_64 with compress. In the client don't have problem but in the message log of the server show this erro: vtund[15145]: segfault at 0000000000000040 rip 0000000000409774 rsp 00007fff88d548d0 error 4 I did the same configuration on another server, but i686 and had no problems. Packs: vtun-3.0.2-1.el5.rf x86_64 lzo2-2.02-3.el5.rf x86_64

Hi, I'm running centos-4.4 on an SMP system with 4 dual core opterons (2.4 GHz), and 16 GB memory. The disk drives are 500 GB SATA-Drives. Wondering about times for dd command performance and rm command performance in an empty machine (the filesystem has been made with "mkfs.ext3 /dev/sd...", nothing more) 1. Making a new 3 GB (1024 x 3megabytes blocks) file with dd needs 10.18

Hi, using centos 4.4, and freenx-0.5.0-10.c4 and nx-1.5.0-1.centos4 on a 8 CPU Amd Opteron system. If I access this system by nxclient-1.5.0 from some workstation (FC6) with Gnome desktop, then after a successful login the X11 windows have no windowmanager frame, so a handling of the X11 windows is very difficult. This effect does not appear when acessing the centos system by xdm. Is this a

HI, I have a problem when installing samba 2.0.3 on IRIX 6.4. If I use the standard IRIX C compiler with -n32 option, all goes OK. But if I use gcc with version egcs-2.91.60, then samba(d) does not run correctly: if I try to connect the smbd (with smbclient), I receive the output below. Does somebody have the same problem? /usr/local/samba/bin/smbclient -L origin -d 5

------- Forwarded Message Date: Wed, 26 Jul 2000 19:10:50 +0200 From: Martin Vogt <mvogt@rhrk.uni-kl.de> To: vorbis-dev@xiph.org Subject: rename kmpg -> kde2 ? Message-ID: <20000726191050.A327186@rhrk.uni-kl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.94.17i Hi, I would like to rename the directory from "kmpg" into "kde2".