similar to: bridging on debian stable endpoints - clarification

Hello all: I am trying to bridge two ethernet segments via tinc. Both endpoints are debian stable machines. Unfortunately the package available in stable is 1.0.3, which according to: http://brouwer.uvt.nl/pipermail/tinc/2006-January/001497.html does not work using the switch or hub modes. I looked at installing the unstable package, but it has dependencies that are not available in

Hi all, So, I've deployed Tinc in a non normal manor to which has been working just fine for days up until recent. Here is a description of the network. There are two VPN host controllers, A and B. All nodes have a separate connection to A and B. Tinc has been configured to be in 'switch' mode for both the A cloud and B cloud. On the back end, I have OSPF running on all nodes and

Hello members of this list, I'am running tinc 1.0.4 on a Windows 2003 Server nearly succesfull. In the event -log I've got the following warning every minute (in German): "Die Beschreibung der Ereigniskennung ( 0 ) in ( tinc.service-vpn ) wurde nicht gefunden. Der lokale Computer verf?gt nicht ?ber die zum Anzeigen der Meldungen von einem Remotecomputer erforderlichen

Hello Sir, My name is Yosi, I am studying in Politeknik Caltex Riau. I am doing a Final project about implementation vpn with Tinc. I read all of literature about Tinc where I configuried Tinc in Linux as Server and Windows Xp as Client. 1. Now I have a problem in Windows Xp. I done all step is wrote by www.tinc-vpn.org. but my vpn not connected on windows. I have network is ?Network

Hi, I am trying to create a vpn with tinc on three windows machines.. Tinc starts listening on 0.0.0.0 port 655 Virtual adapter is connected, no problems there In the conf file are two connect to's : Name = red ConnectTo = duke ConnectTo = optimus Interface = VPN In debug mode, tinc reports: tincd 1.0.4 (May 4 2005 20:55:25) starting, debug level 5 Tap reader running

Hello, I'm trying to use tinc to establish a vpn between two linux boxes. The keys are shared and the connection gets established, but I can't seem to ping either side. One side is strictly a server for the client to connect to. It has a public IP, and the private IP subnet which it's trying to "share" to the client. It's a pretty simple and straight forward setup.

I am a university student from Malaysia.This is my final year and i need to do final year project.I would like to try by applying the VPN in a IPV6 enviroment.Can sir give me some comments and idea on this topic?Thanks. --------------------------------- Try the all-new Yahoo! Mail . "The New Version is radically easier to use" ? The Wall Street Journal -------------- next part

I am trying to get tinc to use aes-128-cbc for it's encryption algorythm for network traffic. So far, I'm not having any luck. I've tried putting it into the tinc.conf file, and it turns out that tinc is ignoring that code completely. I'm using tinc 1.0.4 (in TCP mode). Openssl version 0.9.7d. I've made some initial investigation into the source, and in net_setup.c I

Hello. When tinc is compiled with MingW, sockets are not made non-blocking because O_NONBLOCK is not defined anywhere. This leads to weird timeouts when one or more hosts part of a VPN are unreachable, because tinc hangs in connect() (and possibly other places as well). This guy is probably experiencing this bug: http://brouwer.uvt.nl/pipermail/tinc/2007-April/001646.html I've attached a

Hello. When tinc is compiled with MingW, sockets are not made non-blocking because O_NONBLOCK is not defined anywhere. This leads to weird timeouts when one or more hosts part of a VPN are unreachable, because tinc hangs in connect() (and possibly other places as well). This guy is probably experiencing this bug: http://brouwer.uvt.nl/pipermail/tinc/2007-April/001646.html I've attached a

I configured tinc on my little server, but i get this when i try to run it: root@blacky:~# tincd -n venere -d5 -D tincd 1.0.4 (Apr 30 2006 22:53:06) starting, debug level 5 /dev/net/tun is a Linux tun/tap device (tun mode) Executing script tinc-up Listening on :: port 655 Can't bind to 0.0.0.0 port 655/tcp: Address already in use Ready I don't understand what's wrong.. I hope

Hi to all! Someone pls help me on this one. I configured my Primary bind server and serve also as my gateway pc for my LAN. My server have 2 LAN card: my eth0 203.87.x.60 and eth1 192.168.0.3. Iam using linksys router and serve as my gateway for my net pc. Here's the diagram: NET -----------linksysrouter (203.87.x.57)----------LinuxGateway (eth0 203.87.x.60)

Hi all, I'm following the manual but I get the below error, and I believe tinc is clobbering my conf file. I've never set up VPN before, I'm just trying to connect to my work network from home. All the following is on my work computer. Thanks in advance for any help. $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:1A:A0:17:3A:50 inet addr:172.24.104.145

I'm really trying to do a client to server connection more than an ethernet bridge, but I couldn't figure out from the docs where that comes in. Client is Kubuntu Breezy, and server is Debian Sarge. Tinc was installed with apt-get on both systems. Version on server is 1.0.3, on client is 1.0.4. I've spent the entire day toiling over getting this set up. I had ipchains rules, etc,

Dev-Cpp is a IDE that can be used with MinGW and GCC but its causing problems. I installed MinGW since I am used to ./configure type builds but im unsure if this is a tinc issue or OpenSSL issue. I installed openssl 0.9.8e and I get to the following, $./configure ... checking openssl/evp.h usability... yes ... checking for openssl/engine.h... yes checking for SHA1_version in -lcrypto... no

Hi, Here's a dead simple patch that causes tinc to run optional host-up and host-down scripts as hosts come up and go down. This allows custom host up/down functionality to run without having to know host names in advance. Please consider for future inclusion in tinc. I can provide documentation patches if this is accepted. Regards, Menno Smits NetBox Blue http://netboxblue.com/

Hi, We are trying to set up tinc for playing lan games over the internet. The three of us are running tinc, can ping each other and browse shared folders. yes, windows :| However we cannot connect because we don't show up in the game lobby. The games usually require udp ports to be open, but I think these are all open once we establish the tinc tunnel. Also, testing with all computers in

Hello everybody, I have just released tinc 1.0pre4. Changes: - New authentication protocol (better security, and faster too). - TCPonly and IndirectData are back (but not fully tested). - Documentation revised, it's really up to date with the released package now. - tincd -K now stores public/private keys in PEM format, but keys of 1.0pre3 can still be used. - Faster and more secure

Hi! On two quite different servers I have the problem that I get this error message: tincd 1.0.4 (Apr 21 2006 16:20:48) starting, debug level 3 Could not open /dev/net/tun: No such device Terminating The device is there: ~ # ls -l /dev/net/tun crw------- 1 root root 10, 200 Sep 9 2002 /dev/net/tun As I did not create it myself my best guess would have been that it comes with

Hi, I'm a beginner on VPN's World. I think TINC is a solution for me. I want to connect thru Internet 2 different locations, both networks are Windows based. I downloaded TINC Installer for Windows and followed Installation Guide step by step, everything is ok but when I tried to run TINC Deamon a message it's displayed said: "The services has started and finished immediately