similar to: what am I doing wrong?

Thanks Anthony. I did it on the server, according to https://www.voip-info.org/wiki/view/port+forwarding However after doing it, when running Asterisk I get the following message sudo asterisk -vvvvvvr No ethernet interface found for seeding global EID. You will have to set it manually. Unable to access the running directory (No such file or directory). Changing to '/' for compatibility.

TEQL and Subnet problem I have a network topology shown below, and I am trying to use TEQL. My problem is: When I ping to P3.teql0 from P2 ("[P2]# ping 16.119.144.66"), the traffic can never go from P2.eth1, and all traffic only goes to P1.eth0. What P2.eth1 (16.119.144.33) did is broadcasting an ARP asking for the MAC address of 16.119.144.66, although I have specified the route to

Thank you Daniel for pointing out the errors and debug option. Both fixed and on. It made no difference. There are no errors printed and still no sound on ppers Now to Antony questions: On 06/06/2017 04:36 PM, Antony Stone wrote: > On Tuesday 06 June 2017 15:18:32 andre castro wrote: > >> I just installed asterisk in a debian server. >> All seems to be running fine, but the

I am trying to setup GRE between two CentOS 4.5 boxes. I have tried several variations of what''s listed below, but none of them work. box1: modprobe ip_gre ip link set gre0 up ip tunnel add gretun mode gre local 66.1.1.161 remote 66.1.2.161 ttl 20 dev eth0 ip addr add dev gretun 10.253.253.1 peer 10.253.253.2/24 ip link set dev gretun up ip route add 10.2.0.0/16 via 10.253.253.2 box2:

Hi there, I'm having problems with the Grandstream Budgetone 101 on hangup - "show channels"/"show channels concise" output is still showing the call's channels as active. The problem does not exist when I use SJPhone, so I'm assuming it isn't an Asterisk configuration issue. Has anyone seen this, or better, does anyone have a fix? :) Thanks, David. --

Hello, ALL. I am trying to organize a transparent single sign-on concept for my Active Directory users into Dovecot via IMAP. On the user's desktop I use Thunderbird 6.0 as a mail client (MUA), Windows XP as an operating system. Domain is controlled by Windows 2008 Server SP2 with Active Directory. I have installed on my Mail server Debian GNU/Linux 6.0.2 (Squeeze) and Dovecot 2.0.13 from

Hello All, I am battling a problem I don't know how to fix... Here is the scenario: Fractionated T1 with 1-6 channels voice, 21-24 channels data. Comes into a box with Digium T100P, splits off data channes with HDLC, to devicec pvc0, This works fine, but I have a routing problem getting to my machines! Here is the current set up... sethdlc hdlc0 fr lmi ansi sethdlc hdlc0 create 44

Hi, Does anyone here have experience running Tinc on NixOS? I'm trying to run Tinc on a NixOS machine, using the similar configuration i had for Ubuntu. My home subnet is 192.168.1.0/24 and my work is 10.16.0.0/24. However, unlike ubuntu, when I start tincd on nixos, and try to 'ifconfig $INTERFACE 192.168.1.10 netmask 255.255.255.0' in my tinc-up, I loose network access on the box

Hi, I'm trying a VPN via ssh between Linux (Suse 10.3, 5.0) and OpenBSD (4.2, 4.7). But it doesn't work... On Linux: sudo ssh -v -f -w 0:1 $OPENBSD true sudo /sbin/ifconfig tun0 10.1.1.1 10.1.1.2 sudo /sbin/route add -net 192.168.17.0 netmask 255.255.255.0 dev tun0 On OBSD: sudo ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.0 sudo /sbin/route add 10.0.3.0/24 10.1.1.1 And add a

Yes. The problem is lollipop. I tried to install tinc on my brother's device which mount a cyano 10.1( android 4.2.2) and it works. I don't understand which is the problem with lollipop. Is there a firewall that block the packets? Andrea Squeri If you are running Lollipop / Android 5.x on your Nexus 5, then you are probably seeing the same issue I was with it. lollipop seems to change

Hi, First sorry for my bad English. I made a vpn wtih tinc for link my home and my two office. In Addition I want to configure my android device to link with my vpn. The topology of the net is this: cubox(a linux machine in my home with vpn address 192.168.0.20) groppalbero (a linux machine in my second office with vpn address 192.168.0.40) imac(a mac machine in my first office with vpn address

Hi everybody, I have been using Shorewall for quite a while now but I recently stumbled over a new setup that stopped me cold. I don''t know how to proceed: I have an ordinary GNU/Linux box (2.6.11) connected to a nonpublic network with one interface eth0 which gets an IP through DHCP like 172.17.x.y. Traffic is not routed to the Internet in this subnet. In order to connect to the

I don't know.. It seems that anyone had try to made work tinc with lollipop. Even googoling i don't found anything about this argoument. Andrea Squeri Il 27/mar/2015 06:55 "Tatsuyuki Ishi" <ishitatsuyuki at gmail.com> ha scritto: > SELinux is considered as the biggest problem. > > On Thu, Mar 26, 2015, 22:37 Andrea Squeri <andrea.squeri at gmail.com>

Hello Lartc Mailing List: Been working on something the last week and a half and ALMOST have it working.., just need a few pointers from the wizards on this mailing list to nail it. Ok, my setup is a hub and spoke arrangement, hub is Cisco 2821 with IOS 12.4. Spokes are ruggencom RX1000 routers, Debian based with the following versions installed: rx1000test:~# uname -a Linux rx1000test

Hello, I am facing the problem that samba does not recognize my network interfaces: Jun 29 12:21:59 ebox nmbd[22377]: [2007/06/29 12:21:59, 0] lib/interface.c:load_interfaces(225) Jun 29 12:21:59 ebox nmbd[22377]: WARNING: no network interfaces found Jun 29 12:21:59 ebox nmbd[22377]: [2007/06/29 12:21:59, 0] nmbd/nmbd_subnetdb.c:create_subnets(190) Jun 29 12:21:59 ebox nmbd[22377]:

I switch to lollipop 4 months ago and I never had issue. So for my opinion it is ready for daily use. Before try tinc I had my vpn implemented with openvpn, and it works great on lollipop. I switch to tinc because i prefer a mash vpn topology versus a client/server topology. -- Andrea Squeri Inviato con Sparrow (http://www.sparrowmailapp.com/?sig) Il giorno venerd? 27 marzo 2015, alle ore

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

I have a centos 4 i386 machine that works like a router (iptables filter, NAT) with two NIC''s. One NIC is connected to my ISP (100 Mbit FTTH), I get a DHCP assigned public IP that changes "sometimes". Most incoming ports are blocked by my ISP. In order to get a fixed IP and open ports, I have to set up a PPTP tunnel to the ISP. The default gw and the NAT''ing goes to

Hi, Is anyone here using the "Network Connect" VPN software from Pulse Secure (which was previously known as Juniper Networks Network Connect)? I've used this successfully in the past to connect to the machines at work from home. That was with CentOS 6, though, on CentOS 7 I can't seem to get it to work. The software actually starts, and it also successfully sets up a

I am attempting to setup an IPSec protected GRE tunnel with a Cisco router. I believe the IPSec association is up, however I cannot move traffic over the tunnel. It is not clear how to integrate the tunnel interface (gre1) with firewall-cmd; adding the interface to trusted does not appear to 'stick'. [root at aqueduct ~]# firewall-cmd --add-interface=gre1 --zone=trusted The interface