similar to: Tinc on MacOs X

I have now got the tinc demons (on network OFFICES) on BranchB and BranchA talking to each other, and I have been able to access services (like AFP, Apple file sharing) between the two hosts (in both directions), but not beyond the local network connected to BanchA. I am unclear which routing can be provided by tinc and which routing would I have to add manually. The aim is: BranchB is a

I have now got the tinc demons (on network OFFICES) on BranchB and BranchA talking to each other, see below for log from BranchB. For some trouble shouting issues relating to OsX see at the end of my e-mail. However, I have not yet achieved the network connectivity/routing that I would like. The aim is: BranchB is a laptop I would like to connect it (via tinc) to my office network, so that

Hello Samba folks, I thought you might be able to help me. I have 2 machines, 1 is FreeBSD, 1 is win95. They can't ping each other, but the bsd box comes up in Network Nieghborhood when Samba is active. What's going on? Is it not possible to ping a windows machine from a unix box? They are on the same hub via UTP. IPs are 192.168.1.x and netmasks are same (255.255.255.0).

I'm completely stumped by this problem and I've tried everything at present - including installing dovecot from scratch. The problem is that when trying to get email from the server -AND- there's email in the account, the pop3 or imap process freezes and no email is fetched. The crazy thing is, that it has been working perfectly, but suddenly I'm getting these freezes both

I have just checked the Openbsd box on the if interface. fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 address: 00:02:55:30:54:28 media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::202:55ff:fe30:5428%fxp0 prefixlen 64 scopeid 0x1 xl0:

Hello, I am having a some problems getting SSHD to run on the Ipv6 interface. Interface/Ipv6 Address: ipv6.open-systems.org [kevin at satan kevin/xp-0.0.15] 536 $ping6 ipv6.open-systems.org PING6(56=40+8+8 bytes) 3ffe:1200:3028:ff01::cab --> 3ffe:1200:3028:ff01::caa 16 bytes from 3ffe:1200:3028:ff01::caa, icmp_seq=0 hlim=64 time=73.96 ms sshd_config: ListenAddress

Referring to my previous post about degradation of voice quality when having more than 2 connection. The actual route is: pc xlite -> local asterisk box -> iaxtel -> local asterisk I have tried out a different situation: pc xlite -> local asterisk box -> iaxtel and the second connection pc xlite -> local asterisk box -> iaxtel -> local asterisk The same degradation

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scopeid

Hello there. I've just install nut 2.2 from source on my FreeBSD box. I have an MGE AVR 600 UPS on a USB cable. Following the INSTALL instructions, everything works in term of the USB driver detecting the right UPS and upsd loads up and runs without error. However, upsc reports the following error: # upsc mge600 at localhost Error: Connection failure:Can't assign requested address

Hi list, since we activated 10gbe on ixgbe cards + jumbo frames(9k) on 9.0 and now on 9.1 we recognize that after a random period of time, sometimes a week, sometimes only a day, the system doesn't send any packets out. The phenomenon is that you can't login via ssh, nfs and istgt is not operative. Yet you can login on the console and execute commands. A clean shutdown isn't possible

I appologize if this was already answered somwhere on http://www.voip-info.org/wiki-Asterisk, I'm sure it probably is. And if you wish to just point me to a link that would be appreciated. I am very new to asterisk and unix all around, so these questions may sound rather ignorant. First being, how do I setup asterisk to point to another asterisk server and make all the lines which should

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

This is ifconfig on openbsd box: fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 I think this output shows that the fxp0 interface is on simplex mode. The voice degradation I referred was by using xlite soft phone. I open 2 line similtaneously and dial to FWD and back to my incoming extension. Xlite is runnning on a w2k box with realtek 100M nic in auto mode. I can

Guys, I've heard about some absurd RAM requirements for 9.1, has anybody tested it? e.g. http://forums.freebsd.org/showthread.php?t=36314 -- View this message in context: http://freebsd.1045724.n5.nabble.com/9-1-minimal-ram-requirements-tp5771583.html Sent from the freebsd-stable mailing list archive at Nabble.com.

su-2.05a# ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C --- 192.168.1.1 ping statistics --- 2 packets transmitted, 0 packets received, 100% packet rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6

Hello list! When em0 has an inet address while bridge0 doesn't, it seems to be OK: ----- bs1% uname -a FreeBSD bs1.sp34.ru 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun May 25 20:15:26 MSD 2008 root@bs1.sp34.ru:/usr/obj/usr/src/sys/BSM i386 bs1% ifconfig em0; ifconfig tap0; ifconfig bridge0 em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500

Hi all, I read the setup at http://www.blackh0le.net/articles/vpn-dun-howto.html to setup my VPN. However, I'm having a problem which I think is proxy-ARP not working. I like to ask you to see if you know what's going on. When I ping 10.77.1.1 from windows XP machine the packets get to the 10.77.1.1 machine, but they don't have a return path to get back. When I do ping the windows

Hello, I need some advice how to debug this issue ... Recently I got a new mainboard for a router, it's a Gigabyte GA-H77N-WIFI with two onboard re(4) NICs. The problem is that re0 works fine and re1 doesn't: It doesn't receive any packets. Tcpdump displays all outgoing packets, but no incoming ones on re1. Ifconfig shows the link correctly (100 or 1000 Mbit, depending on where I

Hi all, Over the last month or so I've installed FreeBSD 9 (-stable) on several Mac Minis via the memstick image; they seem to be pretty good little boxes for things like offsite secondary nameservers, for example, and they're easily replaced in case of problems. However, the newest minis have slightly different hardware, and FreeBSD can't find the built-in NIC. pciconf -lv on the

Hello again :) With POLLING enabled I experience about 10%-25% performance drop when copying files over network. Tested with both SAMBA and NFS. Is it normal? FreeBSD 7.1-PRERELEASE #0: Sat Sep 6 01:52:12 CEST 2008 fxp0: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc800-0xc83f mem 0xe1021000-0xe1021fff irq 20 at device 8.0 on pci1 # ifconfig fxp0 fxp0: