similar to: Another idea for tinc on windows

Hi, I configured pptp client and it connected successfully. but after sometimes it automatically got disconnected. /var/log/messages : Jul 15 15:29:19 ahc151l pppd[4725]: pppd 2.4.5 started by root, uid 0 Jul 15 15:29:19 ahc151l pppd[4725]: Using interface ppp0 Jul 15 15:29:19 ahc151l pppd[4725]: Connect: ppp0 <--> /dev/pts/2 Jul 15 15:29:19 ahc151l NetworkManager[852]: <info>

Last question, I promise, I am running PopTop for PPTP on the same box as my firewall. I can connect to the box fine, but nothing will route between the VPN tunnel and the local hosts. I read the Some Hosts have Special Firewalling Requirements article and though it was what I needed, but either I don''t get it, or it doesn''t apply to me. Here is my config: Zones: #ZONE

That is client setup. We have that under control. Our Linux users use Network Manager to connect and our Windows users use the stuff built into Windows. My problem is server-side. The server is a PPTP VPN (running via pptpd) and I have to add the lines below to make it work. plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Now, that allows ALL

Hello, We can't connect to our pptp server through our CentOS gateway with a XP client. The linux client is working but not the XP client. I know for a fact that the pptp server is not the problem because if I connect the XP machine directly to the Internet the pptp vpn is working. I know about the pptp-conntrack-nat patch, I compiled the 2.4.9 kernel, with patch-o-matic-ng-20060511.tar.bz2

I am having a problem with 5.4 that I did not have with 4.5. The problem happens only sometimes but in specific instances. Basically a summary of the problem is that certain network transactions timeout. The specfic instances are with wget, rpm, http. The problem usually, but not always, occurs with pptp stuff. (NOT running pptp but getting pptp stuff). For instance, the following command, which

Thank you, Rowland. I will be going by this afternoon and I will check. The thing is, if it IS "\", how do I enter that into the pptp-options file? The entire list of parameters are in quotes, so do I need a double-backslah or anything? Lead IT/IS Specialist Reach Technology FP, Inc On 10/27/2015 05:21 PM, Rowland Penny wrote: > On 27/10/15 21:05, Ryan Ashley wrote: >> I am

I am not sure how to determine the separator, but 'which' shows "/usr/bin/ntlm_auth". I already ran it while on-site. Since it is broken, I cannot remote in. I will have to show up on-site again, possibly Thursday. Lead IT/IS Specialist Reach Technology FP, Inc On 10/27/2015 01:41 PM, Michael Wandel wrote: > Hey, > > On 27.10.2015 17:53, Ryan Ashley wrote: >>

Hi ! Recently i switched my internet provider, to get more speed but another braindead setup regarding public ip addresses. I now have 4 PPTP Tunnel available, of which i''m using one as the gateway ip doing masquerading to other machines in my local lan, excluding three other machines, which i would like to use 1:1 nat to get them a direct access to one of the pptp tunnels. I was

Hi all, Just wondering if VPN inside VPN is possible? I've created PPTP VPN in the office. Then from home, first I need to use company's official AT&T VPN. Then after connected, I fire up the PPTP VPN client. Got connected, but cannot ping the PPTP gateway, and half minute later the PPTP got disconnected. No obvious error message in the PPTP log. Thank you.

Hello, I''m trying to setup DNAT to forward to a PPTP Server behind Shorewall. I setup the PPTP rules per your documentation with tcp port 1723 and Protocol 47 DNAT to my PPTP Server in the local zone. Looking at the logs it is dropping the connection going to port 1723. It is also dropping UDP port 1701, don''t know if it is of any significance. I looked at FAQ 1a and b and the

I''ve got what I think is a fairly simple home network configuration with one Linux box functioning as the firewall, VPN server, DHCP server and file/print server. I am having trouble configuring both a VPN server (PopTop) and the firewall rules for a W2K PPTP VPN client. The VPN server runs on the firewall machine and the VPN client runs on a W2K machine behind the firewall. The VPN

Hi Adrian, Sunday, April 4, 2004, 10:22:33 PM, you wrote: AP> We have thought about using static MAC entries per port on managed AP> switches installed at the client endpoints, but that would require a AP> overwhelming budget. We are also thinking about L2TP and PPPoE, but I AP> am uncertain about compatibility. AP> What would you recommand ? Are there any other elegant

Akemi Yagi wrote: > On Wed, Mar 25, 2015 at 3:35 AM, Ken Smith <kens at kensnet.org> wrote: >> Hi All, >> >> Anyone else seeing this. >> >> Just updated to kernel 2.6.32-504.12.2.el6.x86_64 and pptp vpn (invoked via >> Gnome Network Manager) fails to connect. >> >> Boot up the previous 2.6.32-504.8.1.el6.x86_64 and pptp all good. >>

Hi friends, I need help. I''ve PPTP Server running behind Shorewall. The PPTP server is working OK in my LAN, but I want to connect outside and It isn''t working. I''ve configurate shorewall like http://www.shorewall.net/PPTP.htm. I add only this lines in my rules DNAT net loc:165.182.15.15 tcp 1723 - IPext DNAT net loc:165.182.15.15 47 - - IPext It isn''t

Hi all I'm not sure whether to go to the ppp lists for this, or the samba lists. I thought I'd try here first. I have a linux firewall using winbind to authenticate users coming in with PPTP. It all seemed to work OK at first. After a while I noticed that authentication was denied to users who had previously (as in less than a day) authenticated successfully. After a day or so of

Hey John, I do not require encryption at all, it's a secure and internal channel but it requires me to connect via either pptp or l2tp. This is the reason I am asking. I had the chance of finding the SoftEther Project which gives a lot in terms of VPN Client and Server. At: http://www.softether-download.com/en.aspx But yet to try it. Also they have all sorts of beta versions but not

Hi, I am facing a task of choosing vpn server. I do not know which is better. The one distributed with CentOS4.5 only supports pppd (or maybe pptp but I cannot find it). If* *I want to use PPTP or L2TP, which one should I choose? OpenVPN? Poptop? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, Anyone else seeing this. Just updated to kernel 2.6.32-504.12.2.el6.x86_64 and pptp vpn (invoked via Gnome Network Manager) fails to connect. Boot up the previous 2.6.32-504.8.1.el6.x86_64 and pptp all good. OpenVPN is not affected. Anyone else seeing this. I have log file details if anyone wants those. Don't see it reported elsewhere. Thanks Ken -- This message has been

shorewall version 2.0.7 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:53:25:b2 brd ff:ff:ff:ff:ff:ff inet 81.169.188.152/32 brd 81.169.188.152 scope global eth0 3: eth1:

First, I assume that you will be running NAT at both locations, if that is not the case, then the configuration will change. When you said VPN, are you using PPTP or IPSEC? Microsoft supports PPTP. In order to connect a PC over VPN to the office, which has a PPTP VPN Server, you will need to runs VPN software. After it is run, the PC obtains a new IP address from your office, If you are using