similar to: Bug in tinc manual

I've got a test lab set up and im having problems connecting. The first problem is that it takes it a couple of tries before it actually connects the two machines. It complains about bogus data and after trying for a minute or so it connects. kill -USR1 shows that they are connected kill -USR2 only shows the local subnet, not the remote I've tried these versions without any luck: cvs

Hello, I'm using tinc for a few years now and that this is my first post to this list tells a lot about the quality of tinc, I think. It's just great, thanks a lot for your fine work! Recently I've discovered these messages in my syslog: Dec 28 16:34:06 vdr tinc.grue[9731]: Possible intruder ix (192.168.178.25 port 60882): wrong keylength Dec 28 16:34:06 vdr tinc.grue[9731]: Error

I have been having some problems setting up tinc on 2 masquerading linux slackware boxes. routerA is a NAT router to the internet, for two networks on two interfaces. This are the two networks: eth1 Link encap:Ethernet HWaddr 00:E0:4C:6C:6D:86 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX

Hello, response time: how is it possible to increase the response time on Tinc VPNs. When I use tinc over a fast or giga-bit network connection the ping-response time is normally about 1800 to 2000 ms. Sometimes I get ping response times at about 2.500 to 3.000 ms over a normal Ethernet Connection or a television-cable connection within the same providers-network in the same city. The ping-time

Hi all, After having read most of the available documentation I still have got problems interconnecting two networks in router mode: My configuration consists of two private home networks that I want to connect: Vienna 192.168.0.0/24 - Internet gateway 192.168.0.1 Berlin 192.168.1.0/24 - Internet gateway 192.168.1.1 VPN Devices are configured as 192.168.3.1 (Vienna) and 192.168.3.2

Hi I'm trying to implement a scheme in which the nodes will have a direct UDP tunnel to each other. First, all nodes make connection with one public node, and then make connections with each other. And I came across the following problem: Remotely located nodes can establish a direct UDP connection, but the nodes that are in the same local network can not, and all traffic goes through the

Hey guys, Stumbled upon tinc a few days ago - looks great. I'm having trouble setting up a simple VPN between two machines that are unfirewalled, one is a physical machine and another is a local VM. I can connect to them via their existing LAN IPs and ping them without issue with < 1ms. 1) I have WinA (Windows host - existing LAN IP 192.168.137.1) and LinuxB (Linux host - existing LAN

i have quite some problems getting 2 lans together with tinc, setup is : 2 linuxrouter connected to the inet. behind everyone is a subnet 192.168.0.0/255.255.0.0 with some normal windowsworkstations. these 2 subnets should be merged to one. we already connected the 2 linuxboxes with tinc and it worked smooth. but the subnets behind the routers werent pingable. so I thought we need ethernet

Here is some examples of using templates for TINC configurations and settings: In your startup script, BEFORE starting TINC VPN, put a number of entries to configure your VPN: sh ./templatewriter.sh LAN LOSI101 8540 255.255.255.0 0.0.0.0 10.99.0.11 10.98.0.11 ConnectTo=LOSI102 ConnectTo= ConnectTo= **PUT MORE ENTRIES HERE FOR MORE COMPLEX VPN setups ######Templatewriter.sh #!/bin/bash

Hi there, I am using tinc since some monthes. I think the basic idea of extending vpn to a mesh of systems via tun/tap is great. And I think it is one of the useable developments compared to the much more complex vpn solutions I had used in the past. Great work. Setting up tinc I have fought with the configuration (and with the concepts) for a while as I have found no example that covers my

Hi, At my provider (xs4all) I've got an ipv6 tunnel working. Now I would like to distribute ipv6 via the tinc tunnel. My tinc.conf: ------------ Name=server AddressFamily=ipv4 Device=/dev/net/tun PrivateKeyFile=/etc/tinc/fvhglobalnet/rsa_key.priv GraphDumpFile=|/usr/bin/dot -Tpng -o /var/www/htdocs.keetweej.vanheusden.com/stats/tinc-fvh-network-graph.png Mode=switch KeyExpire=299

Hi All, I am trying to setup the site-to-site VPN with TINC for connect my home network to company network. Here is the IP allocation and configuration for your reference. Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, 10.0.0.1) ?----------------? INTERNET ?-------------? COMPANY (Windows 7 PC,192.168.2.1, 10.0.0.2) ?------------? COMPANY (SERVER ZONE) ?----? SERVER A

Hello to all i have set up two tincd as mentioned on this site: http://mia.ece.uic.edu/~papers/volans/tincd.html but all i get on the client side is: [ root@mondhexe ]: # tail -f /var/log/tinc.log Trying to connect to naturstrom (80.132.178.186 port 655) Timeout from naturstrom (80.132.178.186 port 655) during authentication Closing connection with naturstrom (80.132.178.186 port 655) Trying to

Beste tinc-developer, Ik moet van mijn baas een aantal VPN's aanleggen en ben nu thuis bezig om te testen. Ik heb 2 computers in een thuisnetwerkje (totaal 6 computers) geinstalleerd met SuSe 7.3, daar de klanten dit ook hebben. De computers zijn verbonden met een switch. Dit is de inhoud van mijn bestanden: Op computer 1 genaamd suse met ip 192.168.0.99 netmask 255.255.255.0

kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by: Fuqian Huang <huangfq.daxian

kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by: Fuqian Huang <huangfq.daxian

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's

Hello, I successfully built a vpn between two hosts ("main" and "iquique") (and its SubNets), but I have problems when I want to add another host ("valparaiso"): I get a lot of Duplicates packets everywhere and a very slow vpn. I guess that is a routing problem, but I have try with a lot of alternatives without result. I have try with "switch",

On Tue, Apr 10, 2018 at 03:36:08PM +0200, Hans de Groot wrote: > hosta  <--> hostb  <-->  hostc > > Hosta and hostc are not directly connected via tinc. But both are conncted > via hostb (I called my network tincnet). This works fine I can ssh from > hosta to hostc and vice versa without any problems. > > hostc is in a whitelisted iprange at some service

"PrivateKeyFile" as this is default, otherwise configuration is quite minimal. ======= Configuration ========= Server Side =========== # cat tinc.conf Name = fsvpns3f30 Mode = switch Device = /dev/net/tun AddressFamily = ipv4 PingInterval = 30 PrivateKeyFile = /etc/tinc/fsvpn/rsa_key.priv # cat tinc-up #!/bin/sh ifconfig $INTERFACE 10.10.100.30 netmask 255.255.0.0 # cat