similar to: hung while trying to contact host

using 1.0pre5 A: tinc.conf ------------ Name = A PrivateKeyFile = /usr/local/etc/tinc/vpn/rsa_key.priv Device = /dev/tap0 ConnectTo = B A: tinc-up --------- #!/bin/sh modprobe ethertap ifconfig tap0 hw ether fe:fd:00:00:00:00 ifconfig tap0 192.168.0.3 netmask 255.255.0.0 ifconfig tap0 -arp B: tinc.conf ------------ Name = B PrivateKeyFile = /usr/local/etc/tinc/vpn/rsa_key.priv Device =

Beste tinc-developer, Ik moet van mijn baas een aantal VPN's aanleggen en ben nu thuis bezig om te testen. Ik heb 2 computers in een thuisnetwerkje (totaal 6 computers) geinstalleerd met SuSe 7.3, daar de klanten dit ook hebben. De computers zijn verbonden met een switch. Dit is de inhoud van mijn bestanden: Op computer 1 genaamd suse met ip 192.168.0.99 netmask 255.255.255.0

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's

"PrivateKeyFile" as this is default, otherwise configuration is quite minimal. ======= Configuration ========= Server Side =========== # cat tinc.conf Name = fsvpns3f30 Mode = switch Device = /dev/net/tun AddressFamily = ipv4 PingInterval = 30 PrivateKeyFile = /etc/tinc/fsvpn/rsa_key.priv # cat tinc-up #!/bin/sh ifconfig $INTERFACE 10.10.100.30 netmask 255.255.0.0 # cat

I have been having some problems setting up tinc on 2 masquerading linux slackware boxes. routerA is a NAT router to the internet, for two networks on two interfaces. This are the two networks: eth1 Link encap:Ethernet HWaddr 00:E0:4C:6C:6D:86 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX

Hi folks. At the moment I'm using tinc to connect to linux boxes, both of which are behind NAT. This works just fine. I'd now like to connect some roaming windows users to the network so they can browse a samba share like I can already do with linux. These folk will likely have dynamic IP addresses. The server has an IP of 10.0.0.2 My client has an IP of 192.168.1.100 Here's what

Hi , today i was trying to connect my windows 7 client to my tinc server and i ran into a strange problem :) my tinc server is running tinc 1.0.11 on ubuntu 10.04 in switch mode , and the windows client is running tinc 1.0.13, there is a very strange problem , i tried to connect the windows system , i configured it , and it didn't work , so i ran it in debug mode -D -d5 , and it told me: Got

Dear Tinc developer, I have some problems connecting to the other site of the VPN Here are my configuration files on pc1 Configuration files on pc2 /usr/local/etc/tinc/tinc.conf /usr/local/etc/tinc/tinc.conf Name = pc1 Name = pc2 TapDevice = /dev/tap0 TapDevice = /dev/tap0 PrivateKeyFile =

I'm really trying to do a client to server connection more than an ethernet bridge, but I couldn't figure out from the docs where that comes in. Client is Kubuntu Breezy, and server is Debian Sarge. Tinc was installed with apt-get on both systems. Version on server is 1.0.3, on client is 1.0.4. I've spent the entire day toiling over getting this set up. I had ipchains rules, etc,

I found the following error in tinc manual in http://tinc.nl.linux.org/documentation/tinc_4.html PrivateKey = /etc/tinc/company/rsa_key.priv should be: PrivateKeyFile = /etc/tinc/company/rsa_key.priv Tinc: Discussion list about the tinc VPN daemon Archive: http://mail.nl.linux.org/lists/ Tinc site: http://tinc.nl.linux.org/

El 12 de febrero de 2016 16:51:59 CET, Eric Yau <ericyaukhy at hotmail.com> escribi?: >Hi All, > > > >I am trying to setup the site-to-site VPN with TINC for connect my home >network to company network. Here is the IP allocation and configuration >for >your reference. > > > >Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, >10.0.0.1)

Hello, I've been trying to get bridging working on os x for about a week and haven't been able to do it. I've exhausted the examples and google and just can't get it to work. Any help would be appreciated, as I'm about to give up :( The goal is to join our two 192.168.1.x networks and share a large 192.168.1.x network between the two of us. Our setup is as follows:

Hi I've compiled Tinc 1.0.2 from source but I'm having trouble. Not only am I having disconnections all the time (could be a network issue however) but even worse, Tinc is ignoring my MaxTimeout = 60 and is waiting longer and longer and longer (logfile shows it at 120 seconds). Is this a bug or have i misconfigured anything? best regards Marco Amrein Dec 5 11:25:12 frank

Hi folks, Sorry to trouble you all - I'm having some trouble getting tincd up and running - I suspect I'm having problems with subnets. Any help would relaly be appreciated! At the moment I'm trying to get two linux boxes, both of which are running as NAT routers for their respective networks to talk. My goal is to allow staff to connect to the corporate network from their laptops

Howdy, I tried tackling this on irc with Ivo, but I suspect that irc may really not be the best medium for technical discussions, so I'll reprise it here. I am trying to duplicate the "tinc from behind a masquerading firewall" example from the tinc web site: (home) <--> (masquerading firewall) <--> (office) 192.168.1.21 192.168.1.1/1.2.3.4

Hi: First of all, thanks for this great piece of software! I found very clear the presentation sheets used at Linux Expo, Amsterdam. :-) About my problem, I setup everything to connect our two boxes. If I type 'ifconfig' I can see them up. Also the routes. ISIvirtual - Our firewall (iptables) which connects to the Internet through ADSL with a public dynamic IP. (the SSL client)

Hey guys, Stumbled upon tinc a few days ago - looks great. I'm having trouble setting up a simple VPN between two machines that are unfirewalled, one is a physical machine and another is a local VM. I can connect to them via their existing LAN IPs and ping them without issue with < 1ms. 1) I have WinA (Windows host - existing LAN IP 192.168.137.1) and LinuxB (Linux host - existing LAN

Hello, response time: how is it possible to increase the response time on Tinc VPNs. When I use tinc over a fast or giga-bit network connection the ping-response time is normally about 1800 to 2000 ms. Sometimes I get ping response times at about 2.500 to 3.000 ms over a normal Ethernet Connection or a television-cable connection within the same providers-network in the same city. The ping-time

Hi all, After having read most of the available documentation I still have got problems interconnecting two networks in router mode: My configuration consists of two private home networks that I want to connect: Vienna 192.168.0.0/24 - Internet gateway 192.168.0.1 Berlin 192.168.1.0/24 - Internet gateway 192.168.1.1 VPN Devices are configured as 192.168.3.1 (Vienna) and 192.168.3.2

Hello, I have 2 hosts HostA and HostB HostA - 10.38.9.2, kernel 2.4.16, tincd from Debian package HostB - 10.38.9.223, kernel 2.2.17-21mdk, tincd from tarball package. HostA: ------------------------------ /etc/tinc/test4/tinc.conf Name = HostA ConnectTo = HostB TapDevice = /dev/misc/net/tun PrivateKeyFile = /etc/tinc/test4/rsa_key.priv /etc/tinc/test4/hosts/HostA Subnet = 10.0.0.0/8 Port =