similar to: Bug report (and workaround): the network freezes when the key expires

Hi, I?m fighting with a silly problem: my syslog tells me tinc cannot route a packet. I can use a telnet or the good ol ping, it is the same effect. When I?m pinging from the laptop (172.16.11.2) the network address (172.16.11.0) or any address numerically lower than the laptops address, the packet gets routed, otherwise not. And when I ping the network address, I get the reply twice, as to be

Hi, I've successfully running tinc1.0pre4 between two locations on SuSE Linux 7.1 in a special masquerading Firewall environment, so that I'm using the TCPonly keyword in the host files to get a connection. Otherwise I would get the message 'Received UDP packet on port 655 from unknown source <ipaddress in hex:port>'. After upgrading to 1.0pre5 I'm getting this message

Hello, I set up a tinc vpn network with tinc 1.0pre5 on Mandrake 8.1 Please take note of the following troubles i noticed 1) In the config files, the name of the variables are case sensitive 2) the BindToInterface seems to be faulty. I removed the line, now everything work, except the security aspect.. 3) I HAD to add a Subnet=<full address of the local tinc device> in the hosts file, or

Hi all: I see a lot of the errors below in /var/log/messages on my firewall: Aug 1 00:47:44 munin kernel: [109008.257109] martian source 192.168.1.5 from 127.0.0.1, on dev eth1 Aug 1 00:48:44 munin kernel: [109068.257384] martian source 192.168.1.5 from 127.0.0.1, on dev eth1 Aug 1 00:49:44 munin kernel: [109128.257509] martian source 192.168.1.5 from 127.0.0.1, on dev eth1 Aug 1 00:50:44

I have been trying to set up one end of a tinc vpn as a default gateway for the other and am not having much success. Given that I have two machines, A and B. I have a working tinc connection between A and B on an internal network. B has access to machines on A's subnet using statements such as Subnet=10.38.9.0/24 Subnet=172.24.100.33/32 A is connected to the internet, B has to go

Hi Guus, I?m using tinc since 1.0pre4 (and still use pre4) - it?s a great thing. Since these day?s a part of my VPN relies on a http-tunnel (because you used a single TCP connection as carrier). With 1.0pre4 that was very easy to setup using the TCPonly setting. But with 1.0pre5 it seems you changed the carrier connection setup, so that my old setup didn?t work anymore. In the meantime you

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Hi! When I try to use tinc I get this message 'Cannot route packet: unknown type 0' when I try to ping or ssh to the box I'm connected to. Below is my setup: ifconfig tun device: -------------------- midkemia Link encap:Ethernet HWaddr FE:FD:00:00:00:00 inet addr:192.168.6.1 Bcast:192.168.6.255 Mask:255.255.0.0 UP BROADCAST RUNNING NOARP MULTICAST MTU:1500

Hello, I have 2 hosts HostA and HostB HostA - 10.38.9.2, kernel 2.4.16, tincd from Debian package HostB - 10.38.9.223, kernel 2.2.17-21mdk, tincd from tarball package. HostA: ------------------------------ /etc/tinc/test4/tinc.conf Name = HostA ConnectTo = HostB TapDevice = /dev/misc/net/tun PrivateKeyFile = /etc/tinc/test4/rsa_key.priv /etc/tinc/test4/hosts/HostA Subnet = 10.0.0.0/8 Port =

Sending your passphrase encrypted is all fine, but tinc sends the key with which it was encrypted about a second later... Anyone being able to intercept these two requests is authorized on the VPN. We need asymmetric authentication _now_. -- Ivo Timmermans -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size:

Hi 'tinc users' I'm new whit tinc and this mail-list. I like to build a vpn over the internet between two sites in Holland and Germany. Are there some experience whit the performance (turn-a-round en bandwidth) of a link. I want to use it for a 1,5Mb connection. Greetings, Fred Krom. - Tinc: Discussion list about the tinc VPN daemon Archive:

I've got a test lab set up and im having problems connecting. The first problem is that it takes it a couple of tries before it actually connects the two machines. It complains about bogus data and after trying for a minute or so it connects. kill -USR1 shows that they are connected kill -USR2 only shows the local subnet, not the remote I've tried these versions without any luck: cvs

Hello to everybody, We have an ADSL link with uplink speed of 530kbit, the goal is to divide the traffic into three classes, let say A, B and C. A data rate of 240kbps must be guaratee to class A. The remaing rate must be assigned: at least 180kbit to class B and at least 80kbit to class C. The unused band of class A must be given to class B and C (if needed) The unused band of class B must be

On Thu, Mar 08, 2001 at 11:51:53AM +0100, Marcel Loesberg wrote: > I'm going to build a VPN and I want to use either Tinc or FreeS/WAN. > I've started building the VPN with FreeS/WAN and I find things are getting > rather complicated. > I looks like Tinc is much easier to configure but in the FAQ and in what I've > seen of the documentation so far there is no mention of

Hello, I successfully use tinc for one year in a configuration with several subnets (about 5-7 subnets) and one main server. Sometimes tinc dies with the error message: Error while waiting for input: Bad file descriptor If it happens, this happens immediately, when one subnet has disconnected. tinc (on the main server) tries then to disconnect all currently connected subnets and while

Hallo, I?m using tincd now since the old days of 1.0pre4 and ist pretty good software. Ths week I went to upgrade from 1.0pre7 to 1.0.1 and failed. The tincd process gets aborted inside the libcrypto library with OPENSSL_assert (inl >0). Tracking down that problem I found, that the EVP_DecryptUpdate gets called in meta.c with the last argument containing a negativ value (lenin is -204).

Was running 1.0pre2 just fine, but had to move machines, so I figgured I'd give 1.0pre3 a try. After getting everything to build and figguring out the new config files, here's where I'm stuck. Start the server process (remote machine). Start the client process (local machine). In remote machine, the following shows up in syslog: tinc[2659]: Got SEGV signal In local machine, the

Hello everybody, I have just released tinc 1.0pre4. Changes: - New authentication protocol (better security, and faster too). - TCPonly and IndirectData are back (but not fully tested). - Documentation revised, it's really up to date with the released package now. - tincd -K now stores public/private keys in PEM format, but keys of 1.0pre3 can still be used. - Faster and more secure

Hi, here's a small list of things that need to be done, and the version when it should be ready. smartcard support 1.1 LDAP support 1.1 public/private keys for authentication 1.1 don't store passphrases in files that are called after IP addresses 1.0 use names to identify

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's