similar to: VPN in IPV6

Can i know where can i get into the digest?Got any links?Can sir recommend some journal or related works for me to refer?Thanks. tinc-devel-request@tinc-vpn.org wrote: Send tinc-devel mailing list submissions to tinc-devel@tinc-vpn.org To subscribe or unsubscribe via the World Wide Web, visit http://brouwer.uvt.nl/cgi-bin/mailman/listinfo/tinc-devel or, via email, send a message with subject or

Hello. When tinc is compiled with MingW, sockets are not made non-blocking because O_NONBLOCK is not defined anywhere. This leads to weird timeouts when one or more hosts part of a VPN are unreachable, because tinc hangs in connect() (and possibly other places as well). This guy is probably experiencing this bug: http://brouwer.uvt.nl/pipermail/tinc/2007-April/001646.html I've attached a

Hello. When tinc is compiled with MingW, sockets are not made non-blocking because O_NONBLOCK is not defined anywhere. This leads to weird timeouts when one or more hosts part of a VPN are unreachable, because tinc hangs in connect() (and possibly other places as well). This guy is probably experiencing this bug: http://brouwer.uvt.nl/pipermail/tinc/2007-April/001646.html I've attached a

Hi, We are trying to set up tinc for playing lan games over the internet. The three of us are running tinc, can ping each other and browse shared folders. yes, windows :| However we cannot connect because we don't show up in the game lobby. The games usually require udp ports to be open, but I think these are all open once we establish the tinc tunnel. Also, testing with all computers in

Hello everybody, I have just released tinc 1.0pre4. Changes: - New authentication protocol (better security, and faster too). - TCPonly and IndirectData are back (but not fully tested). - Documentation revised, it's really up to date with the released package now. - tincd -K now stores public/private keys in PEM format, but keys of 1.0pre3 can still be used. - Faster and more secure

Hello, Here is a patch for protocol_subnet.c with two modifications : - in tunnelserver mode, tinc must check subnets in the ".../hosts/owner" config file, not in "c->config_tree" (which is the configuration of the meta-connection from which we receive the ADD_SUBNET message). - this checking can be made before the check of the owner, especially before any

Dev-Cpp is a IDE that can be used with MinGW and GCC but its causing problems. I installed MinGW since I am used to ./configure type builds but im unsure if this is a tinc issue or OpenSSL issue. I installed openssl 0.9.8e and I get to the following, $./configure ... checking openssl/evp.h usability... yes ... checking for openssl/engine.h... yes checking for SHA1_version in -lcrypto... no

Hi, I'm a beginner on VPN's World. I think TINC is a solution for me. I want to connect thru Internet 2 different locations, both networks are Windows based. I downloaded TINC Installer for Windows and followed Installation Guide step by step, everything is ok but when I tried to run TINC Deamon a message it's displayed said: "The services has started and finished immediately

Hi there! Today I've tried a FTP connection (me with TCPOnly send file to another no TCPOnly), but the upload bandwidth was about 20 kb/s, while connecting to the other directly (I upload a file to him via FTP) the connection was about 5 times faster... what's wrong? thanks

Hi there! Today I've tried a FTP connection (me with TCPOnly send file to another no TCPOnly), but the upload bandwidth was about 20 kb/s, while connecting to the other directly (I upload a file to him via FTP) the connection was about 5 times faster... what's wrong? thanks

Hello, I successfully built a vpn between two hosts ("main" and "iquique") (and its SubNets), but I have problems when I want to add another host ("valparaiso"): I get a lot of Duplicates packets everywhere and a very slow vpn. I guess that is a routing problem, but I have try with a lot of alternatives without result. I have try with "switch",

Hi all, So, I've deployed Tinc in a non normal manor to which has been working just fine for days up until recent. Here is a description of the network. There are two VPN host controllers, A and B. All nodes have a separate connection to A and B. Tinc has been configured to be in 'switch' mode for both the A cloud and B cloud. On the back end, I have OSPF running on all nodes and

Hi, I'm getting this weird error in the logs when starting tinc "Creating metasocket faile: Address family not supported by protocol" I've tried explicitly putting AddressFamily = ipv4 in the tinc.conf file but it doesn't seem to make a difference. The IP's i'm using for the vpn are 10.0.x.x Thanks for your assistance, R. Schwarzenberg -------------- next part

With pleasure we announce the release of version 1.0.5. Here is a summary of the changes: * Lots of small fixes. * Broadcast packets no longer grow in size with each hop. This should fix switch mode (again). * Generic host-up and host-down scripts. * Optionally dump graph in graphviz format to a file or a script. * Support LZO 2.0 and later. This version of tinc is compatible with

With pleasure we announce the release of version 1.0.5. Here is a summary of the changes: * Lots of small fixes. * Broadcast packets no longer grow in size with each hop. This should fix switch mode (again). * Generic host-up and host-down scripts. * Optionally dump graph in graphviz format to a file or a script. * Support LZO 2.0 and later. This version of tinc is compatible with

Hello all, I've been playing with tinc to setup a wan between two offices of the company that I work for. I'm partially there but having a slight problem. tinc comes up between the 2 machines (both 2.2.14 debian woody machines), and I can ping from the vpn machine at office a, and get a response from office b. However, if I ping any other machine across the wan I can't get a

On Thu, Mar 08, 2001 at 11:51:53AM +0100, Marcel Loesberg wrote: > I'm going to build a VPN and I want to use either Tinc or FreeS/WAN. > I've started building the VPN with FreeS/WAN and I find things are getting > rather complicated. > I looks like Tinc is much easier to configure but in the FAQ and in what I've > seen of the documentation so far there is no mention of

Hello All , I installed tinc for windows. But it doesn't seem to work. I want to connect two computers(for testing purposes) computer1(webdev) and computer2(gis) I have installed the tap-win32 on both of them. Both computers are windows XP. Also I don't have a router. Computer1:webdev ----------------------- C:\Program Files\tinc\vpn1\tinc.conf Name = webdev ConnectTo = office

Hello, I successfully use tinc for one year in a configuration with several subnets (about 5-7 subnets) and one main server. Sometimes tinc dies with the error message: Error while waiting for input: Bad file descriptor If it happens, this happens immediately, when one subnet has disconnected. tinc (on the main server) tries then to disconnect all currently connected subnets and while

Using tincd 1.0.7, if I send a SIGALRM to tincd when a host is unresolvable, it gets stuck in a nasty loop: Feb 12 19:33:02 rosalyn tinc.slamb.org[2925]: Got ALRM signal Feb 12 19:33:02 rosalyn tinc.slamb.org[2925]: Trying to connect to calvin (216.136.66.56 port 655) Feb 12 19:33:02 rosalyn tinc.slamb.org[2925]: Error looking up slamb- linux.dyn.slamb.org port 4500: Name or service not