similar to: Uneditted logfile for my ppp+tinc messup

I'm wondering if I'm seeing a regression of 5616 with 3.4.8. I'm trying to set-up pptpd with winbind, which I'm doing on two machines on Debian lenny, and I'm trying on Debian Squeeze now. The Windows client is saying "Error 778: It was not possible to verify the identity of the server." The logs say that everything is ok, and that the client is hanging up the

I'm having a trouble. I use winXP to connect through L2TP/IPsec to one Linux server. When I try to connect in my domain appear an error at log. Plugin winbind.so loaded. WINBIND plugin initialized. using channel 36 Using interface ppp1 Connect: ppp1 <--> /dev/pts/3 sent [LCP ConfReq id=0x1 <mru 1410> <asyncmap 0x0> <auth chap MD5> <magic 0x564e3dc9>

Hi friends, I need help. I''ve PPTP Server running behind Shorewall. The PPTP server is working OK in my LAN, but I want to connect outside and It isn''t working. I''ve configurate shorewall like http://www.shorewall.net/PPTP.htm. I add only this lines in my rules DNAT net loc:165.182.15.15 tcp 1723 - IPext DNAT net loc:165.182.15.15 47 - - IPext It isn''t

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

After a big help from Peter Svensson, I got ISDN Data-calls up and running. But now when everything seems connected, pppd has been authorized by other peer and even got an IP address, the whole connection seems to stop working. Very unregulary, the PPPD's EchoReq's stop being answered, and of course all TCP/IP-traffic as well. It takes between 0-2 minutes till the connection breaks.

Hi. I need to use /dev/ppp inside the lxc container, for very ancient software. Problem solved this way: 1) virsh edit container name and add section: <features> <capabilities policy='default'> <mknod state='on'/> </capabilities> </features> 2) start container 3) attach or ssh container, be root: #mknod /dev/ppp c 108 0 4) inside

After a big help from Peter Svensson, I got ISDN Data-calls up and running (will probably send a small patch to Mantis soon). But now when everything seems connected, pppd has been authorized by other peer and even got an IP address, the whole connection seems to stop working. Very unregulary, the PPPD's EchoReq's stop being answered, and of course all TCP/IP-traffic as well. It takes

Hi all I'm not sure whether to go to the ppp lists for this, or the samba lists. I thought I'd try here first. I have a linux firewall using winbind to authenticate users coming in with PPTP. It all seemed to work OK at first. After a while I noticed that authentication was denied to users who had previously (as in less than a day) authenticated successfully. After a day or so of

hello everyone, i am setting up my computer and want to establish internet connection over ADSL. For this i have to use pptp. The annoying thing is, that doing 'pptp 10.0.0.138' i get a connection only every second time. Perhaps it is a problem, that i cannot stop pptp but killing it, and therefore pppd has to clean up? i am using pppd 2.4.3 and pptp 1.5.0 Thanks in advance

I'm having problem connecting to my isp with my sangoma s518. Everything seems to run smooth and wanrouter are training to connect....but forever.. Now, to test the connection i mounted up my standard nic and my old dsl router, to establish a standard basic pppoe connection..... and I can't with centos. I follow this standard setup:

Hello, i have ported the BCP (Bride Control Protocol) patch for pppd 2.4.1 mentioned in http://lists.osdl.org/pipermail/bridge/2004-September/000619.html to pppd 2.4.2. The kernel patch still works without problems with kernel 2.4.30. Perhaps someone else could use this patch ... Here again some documentation i have found about the BCP patch somewere else: When pppd negotiates BCP, it tells

Hi, I am having problems establishing an adsl connection in dom0 (but ONLY in dom0, without xen everything is ok). Following is my setup/situation: 1. Installed clean Fedora 7 (with virtualization option selected) 2. Booted with the non-xen kernel & setup adsl. Adsl connection works without any problems. 3. Rebooted with xen kernel into dom0. 4. adsl connection can no longer be activated

Hi all, I read the setup at http://www.blackh0le.net/articles/vpn-dun-howto.html to setup my VPN. However, I'm having a problem which I think is proxy-ARP not working. I like to ask you to see if you know what's going on. When I ping 10.77.1.1 from windows XP machine the packets get to the 10.77.1.1 machine, but they don't have a return path to get back. When I do ping the windows

I am trying to set up a secure PPP tunnel between an OpenSSH client and server, and am having problems establishing the tunnel. ----------------------------------------------------------------------------- Server information: Stock Redhat 6.1 machine running a 2.2.12 kernel OpenSSH version 2.2.0p1 (downloaded as Redhat RPMs, revision 2) OpenSSL version 0.9.5a (downloaded as Redhat RPMs, revision

Yes your chap-secret file could be the issue, it should look like this: Your_usrname * Your_password * That?s it :) But if that don?t work include this file to the list: /etc/ppp/pptpd-options It should look something like this: ipparam PoPToP lock mtu 1490 mru 1490 ms-wins 172.x.y.1 ms-dns 172.x.y.1 multilink proxyarp auth +chapms-v2 ipcp-accept-local ipcp-accept-remote lcp-echo-failure 30

Hi folks, Don't know if it could be interesting or not, even useful, but past days i was spending my time trying to use an old gsm motorola v150 mobile phone to get access to my host from my palm device with pssh (http://www.sealiesoftware.com/pssh/), these are the steps i did to accomplish it, feel free to suggest or improve it, anyway i found it usefull. First, this motorolla has an usb

My goal is to make VPN access to our Samba PDC (FreeBSD 7.0) so that users can access there home shares from Windows clients. I have read the instructions at http://samba.org/ftp/unpacked/lorikeet/pppd/final-report.pdf, but I can't make it work. Don't know if is due to my lack of skills or has something to do with the Popop functionality in FreeBSD. Following the instructions, i made a

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=517 Summary: failed to forward packets via some interface Product: netfilter/iptables Version: linux-2.6.x Platform: mips OS/Version: other Status: NEW Severity: critical Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=518 Summary: failed to forward packets via some interface Product: netfilter/iptables Version: linux-2.6.x Platform: mips OS/Version: other Status: NEW Severity: critical Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org