Displaying 20 results from an estimated 3000 matches similar to: "Fwd: asterisk-users Digest, Vol 95, Issue 33"
2012 Jun 23
2
Can't make call with TDM410P
Actually I can start and receive SIP calls (PC client, iphone client)
but?I have an issue with calling external number throught PSTN
(certified-asterisk-1.8.11-cert2).
I'm having this ?error when making a call:
*CLI> ? == Using SIP RTP CoS mark 5
? ? -- Executing [9000 at local:1] Dial("SIP/3000-00000006",
"DAHDI/1/4384019357,10") in new stack
[Jun 23 16:18:09]
2010 Nov 24
1
Disable connected line updates for dahdi PRI channel
Hi,
Starting in Asterisk 1.8.0, Asterisk supports connected line updates.
This is fantastic for SIP. How can I prevent them from being sent to a
PRI channel?
I'm having problems when a call is answered by an internal SIP
extension, then transferred (blind or attended) to another internal SIP
extension. One of my PRI providers can't handle the ROSE_ETSI_EctInform
APDU and drops the
2013 Feb 20
2
ERROR: chan_dahdi.c: PRI Span: 3 PROBLEM: General: Badly Structured Component
Hi all,
has anybody ever encountered this ERROR before? It happens frequently on
my debian6-based pbx. I'm using Asterisk 1.8.11 with dahdi-linux-2.4.1
and a quadBRI card.
ERROR: chan_dahdi.c: PRI Span: 3 PROBLEM: General: Badly Structured
Component
I tried to google but without success.
Do you know what it means? Should I worry?
Thank You
Giorgio
2012 Dec 01
1
setvar from chan_dahdi.conf
Would someone be able to give an example of a working use of setvar from chan_dahdi.conf? I am trying to create a custom variable like I use in sip.conf but I have been completely unsuccessful getting any variable set using setvar to appear for a DAHDI
channel. I am running 1.8.11-cert8 and am using the newer format (but I have tried using the older [channels] format). Here is an example:
2016 Mar 24
2
PRI error "ROSE REJECT"
We've been having some problems with an E1 PRI line for a few days. We
get the following errors:
[Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 ROSE REJECT:
[Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 INVOKE
ID: 316
[Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 PROBLEM:
Invoke: Unrecognized Operation
The telephone company says that
2009 Jul 19
3
DAHDI Error and poor audio quality
Hello Team
I have installed the new DL580 and used the new TE420B to add capacity on
our ivr. Before I put new E1?s I decided to first move the old e1 from the
old system to this new one but it has errors which not only affect the
audio quality, but also cause the asterisk to refuse any call after
sometime even though the channels seems up and active {seems d-channel
fails}..
When processing
2011 Apr 19
1
chan_dahdi under bristuff 0.4.0-RC11 not building under Linux 10.04.2 LTS
Hi all,
I downloaded a copy of bristuff 0.4.0-RC11 on my Ubuntu 10.04.2 LTS server
machine with 2.6.32-24-generic-pae kernel.
The prereq.sh script executes without complaints (BTW on my system,
libncurses-dev evaluates to libncurses5-dev and libz-dev evaluates to
zlib1g-dev).
With the asterisk 1.4.41 package that is installed, a make menuselect
operation indicates that all dependencies are met
2013 Jul 30
2
Dahdi interface flapping
Hello,
I seem to be having an issue with the configuration of my PRI on a new
asterisk server I've created to replace an old install that I have.
The card is Digium Wildcard TE133. I continually get messages like
"Primary D-Channel on span 1 down", rather irregularly:
[2013-07-29 17:31:39] VERBOSE[3621] sig_pri.c: == Primary D-Channel
on span 1 up
[2013-07-29 17:31:39]
2011 Mar 18
7
One PRI card with 2 (or more) Telcos
Hi list!
We currently have a PRI gateway composed by a box with two Digium quad-span
PRI cards (a TE420 and a ).
One of the cards is filled with TELCO1, while the other has first two slots
filled with TELCO2, and 3rd slot with TELCO3.
I am currently having (timer ?) issues on TELCO3 (span 7)
D-Chan (202 as determined by dahdi_genconf ) is constantly failing causing
on-going calls to terminate.
2009 Apr 03
1
ISDN Timer T309
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi everione,<br>
<br>
I'm make some test with pri timer T309. I'm using asterisk 1.4.23.1,
libpri 1.4.9, dahdi-linux 2.1.0.4 and dahdi-tools 2.1.0.2. But in my
tests, the timer fail with a telco
2014 Jan 20
1
ISDN Cause Code 47 Errors
We fairly recently switched service providers for our 4 PRI circuits. Since
that time, we started to notice some failed inbound calls. These calls
terminate with an ISDN cause code 47 'resource unavailble'. Most of the
time I see this error on the first or second channel on the second span in
a trunk group (This is the providers trunk group for hunting, not an
Asterisk trunk group). All
2012 Oct 29
1
asterisk crashed on segmentation fault
Hello,
I have a problem.
One every couple of months my asterisk system crashes with a segmentation fault.
kernel: asterisk[20527]: segfault at 0000080000000008 rip 00002aaac952d8f2 rsp 0000000040edb910 error 4
(This is in /var/log/messages)
If I look at the same timestamp in the warning log file of asterisk (/var/log/asterisk/warning),
I see that the are warning about fix up channel:
2013 Sep 25
2
users can not hear the audio playback sometimes
Hello everyone,
I am facing a strange problem on my asterisk box (using isdn lines with
pri card installed on it). Normal incoming/outgoing calls are working
perfectly fine.
When a user dial a wrong/out-of-service number they don't hear back any
such message like "The number is wrong or user is switched off" in some
cases, and it's just a silence for the user.
Now while
2010 May 31
1
Suddenly "HDLC Bad FCS (8)" errors on ISDN-PRI, changed nothing
Hi fellow asterisk users,
I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel
module) an approx. 100 snom320. The whole installation is running
without issues since 5 months.
Without having changed anything on the asterisk server for at least 2
months, i noticed "clicking sounds" at external calls over the PRI.
Asterisk constantly throws the following messages:
...
2018 Feb 15
2
Problem with DAHDI
Hi again!
I tried to attach two VoIP-phones to my new Asterisk 13.14.1 on a Banana PI
with Armbian/Debian 9.
First test was to call a test service that say the time. Works!
Second test was to record my voice and play it again. Works!
Third test was to call the other VoIP-phone. It does NOT work... :(
Then I noticed that, by starting, Asterisk says the following messages:
[Feb 15 18:42:54]
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
Hi all,
Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with
Asterisk 1.6.2 and DAHDI BRI - to no avail.
I had two servers so copied network setting etc from the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16
2009 Sep 18
1
No more room in scheduler
Hi,
I running into the following problem on my Asterisk setup:
--snip--
[Sep 3 01:40:59] NOTICE[9170] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 3
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: Asked to delete sched id -1???
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep
2009 Oct 29
1
Zap inbound hangup problem
Hi all,
I have an Astribank connected to Asterisk 1.4. I'm setting up extensions and
I have a problem with inbound calls to zap extensions. The phone at 65 rings
once and then the line gets hung up. If I pick up the phone really fast, it
works. Any suggestions?
I have the following setup:
[from-pstn]
exten => 207582401,1,Dial(Zap/65,30)
CLI shows me this:
-- Accepting call from
2013 Jun 28
0
No subject
fact I'm surprised that's changed (FreePBX's DAHDI module created the
current config -- i.e. the one I posted in my original email). I'll
change that back and see if that makes a difference, but I'm pretty
sure I used the above configuration in a previous attempt with the
same results.
Also, I have indeed received the following messages prior to the
interface going down and
2009 Jan 28
1
E1 conection to a Cisco2600
Hi
I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a
Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02),
Errors:
[Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1
up
[Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think
we're the CPE, but they think they're the CPE too.
[Jan 28 17:32:34] NOTICE[6182]