similar to: SIP over SSL TCP or SRTP?

Hi all, We're testing TLS and SRTP on Asterisk 1.8.10.0 and have it working with a commerical (not self-sign) AlphaSSL wildcard (GlobalSign) using Blink Lite 1.6.2 as per https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial We've tested with Bria on an iPhone and that doesn't recognised the commercial CA (GlobalSign Root CA). On a Yealink 28P with V60/V61 is registers

I've been lurking on the dev discussion on creating nat=auto. It all leads me to think there's no reason to use nat=no. We have about 60 internal sip extensions connected to an multihomed asterisk box where the external ip is not nat'ed. Each of the internal sip contexts has nat=no. On startup I get a slew of warnings about intruders being able to distinguish real extensions. But

I'm trying to use Asterisk as a PSTN simulator to run performance tests for echo cancellation algorithms. I'm using the following configuration: SIP <-----> Asterisk 1 <----> Asterisk 2 <----> Echo() Asterisk 1 and Asterisk 2 are connected using E1. Echo() is the dialplan application. The problem is the high delay using this configuration: 20 ms only in Asterisk 2.

Bad day today. Why this new JIRA system not working. I have created issue and submit and i got blank page.. Please someone help me to create BUG!!!!!!!!!!! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110608/e99afa31/attachment.htm>

We are using res_fax_digium with a Sangoma PRI card on asterisk 1.8.13 The docs at http://docs.digium.com/FAX/fax_for_asterisk_admin_manual.pdf indicate v34 is supported, but when I enable it I get the message "res_fax_digium.c:1624 dgm_fax_new: V.34 not supported, will be ignored." Is v34 only supported with SpanDSP? Also, the res_fax.conf.sample does not indicate v34 as a valid

Hi. I am using asterisk 1.8 and everything was working fine when I was at svn 342661. I then upgraded to vrsion 349339 and discovered the following problem -- one of the end points is a freeswitch box which offers a number of codecs, including PCMU. However, when I tried to make a call I got a 488 response and a message "multiple audio streams not supported" in the log. Is this by

Hello list, I need to know about Asterisk's friendly nature with RTCP. I've phones which support RTCP and they connect to the outer world via multiple carriers. In one of my recent packet traces I've observed that the caller initiated a call with rtcp string in SDP while for the same call dialling our from Asterisk to the carrier has no RTCP string in SDP ! Can anyone please tell why

Hi all, Do you have an idea on the best way on how to implement a system with multiple Asterisk servers with BLF working in such a way that a peer on one server can subscribe to another peer on the other server in a seamless manner? Has anyone set-up a system like this before? Thanks! Regards, Ronald -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm having some questions related to echo cancellation configuration on a Digium board enabled systems (B410P, TE420, TE420B, ....) for cases when a hardware ech canceller is present or not. I read in TEXXX manual that when setting echocancel=yes in chan_dahdi.conf on a VPMOCT64-equiped system, 128ms hardware echo cancellation was enabled. 1. I'm correct thinking that it is then

Hi Everyone, 1- Are the Siren7 and Siren14 the G.722 HD voice codecs? 2- Are these codecs only for Polycom units or are they universal across all other SIP phones that advertise the HD voice codec like Aastra? 3- What is the main difference between the two and is it advisable to run these over the INTERnet (not INTRAnet)? Thanks -------------- next part -------------- An HTML attachment was

Hello List, I work in an environment where I have to request IPTABLES changes rather than doing them myself. Is there a way to utilize my SSH (port 22) to get a functional (and with good sound) Asterisk installation with multiple channels up without requesting the 5060(SIP) 5061 (TLS) and UDP/RTP (usually 10001-20000) IPTABLES allowances? Thanks Danny Nicholas

Hello, Trying to set up res_fax_spandsp. Based on https://wiki.asterisk.org/wiki/display/AST/T.38+Fax+Gateway I wrote this in my extensions.conf: exten => 306,1,NoOp(Fax transmission) same => n,Set(FAXOPT(gateway)=yes) same => n,Dial(DAHDI/3) ----->FXS port to fax machine same => n,Hangup() Call flow Im trying to pull out is as follows: Zoiper -->

Hello, Im looking to buy a digium phone D70 unit just for testing on lab; to really understand the phone and features. I cant find any website with opinions; any here? Are they really valuable to the price? (D70 quite expensive) Does the SDK for building apps is usable? Can you build powerfull apps? Examples? Many thanks -------------- next part -------------- An HTML attachment was

Hello, short question: is there a possibility to use asterisk as an outbound proxy? iam open for any suggestions, use asterisk trunk, dirty patches, ugly workarounds, everything. What is want to build is: SIP Phone -> via TLS/SRTP -> Asterisk as outbound proxy -> via UDP/RTP -> VoIP-Provider So Asterisk should just forward any incoming SIP messages (INVITE, REGISTER) to the

Hi guys, I want to ask if its possible to make calls using one SIP account, The problem is like this : I have an iPhone app and I want all my users to call the same extension which is virtual extension to my call center, so the iPhone app will be using the same SIP account for all users lets say for example: iPhone users uses 6000 at mydomain to call 9000 at my domain(which is the call center)

Hi list. I have Asterisk installed on a Debian 1.8 6 64-bit. What happens is the following, some channels are not being hangup properly. They run the hangup in dialplan, but the output of the command "core show channels" shows several channels with status "rsrvd." Checking the server's memory, the "top" command shows multiple processes and stopped using the

Hi, Can anybody with previous experience with it guide me on how to setup asterisk with analog e&m to connect it to an old style e&m system which uses 4 pair cables on RJ 45 jacks. All the analog cards I know of use RJ 11 jacks. And there is no choice of modernization of the customer equipment. Cable pin out are as follows: 1. M lead 2. E lead 3. Tip1 4. Ring 5. Tip 6. Ring1 7. SG 8.

Hello, I can do simple, "yum install asterisk18-*" and it installs Asterisk and Dahdi-tools/Dahdi-Linux on my OpenVZ container. Everything runs well and smooth. However, if I want to compile dahdi-linux on the same openvz then I get the error, *"You do not appear to have the source for the 2.6.32-4-pve kernel installed".* * * 1- Based on above error and Google search I have

Howdy All, I'm considering Asterisk / Digium as a replacement to my existing phone switch. I need to continue to be able to push analog lines between multiple buildings in a campus environment. The Digium Analog 410 Card manual states it's not recommended to go beyond 1500 feet distance for an FXS card, and no line should leave the building or be bundled. The 2400 Series Manual does

So, I've compiled and installed libpri-1.4.11.5, dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi is not getting built. If I do a "make menuselect" in asterisk I see it listed with XXX, meaning that dependencies are not met. XXX chan_dahdi Depends on: res_smdi(M), dahdi(E), tonezone(E), pri(E), ss7(E), openr2(E) res_smdi gets built fine, dahdi is