similar to: SATA errors in log

Might be slightly OT as it isn't necessarily a CentOS related issue. I've been using WD Reds as mdraid components which worked pretty well for non-IOPS intensive workloads. However, the latest C7 server I built, ran into problems with them on on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error write fpdma queued". Googling on it threw up old suggestions to

Anyone here using http://www.sonnettech.com/product/tempossd.html with a zfs-capable OS? Is e.g. OpenIndiana supported? Thanks.

Hi, we have SunFire X4140 connected to Dell MD1220 SAS enclosure, single path, MPxIO disabled, via LSI SAS9200-8e HBA. Disks are visible with sas-addresses such as this in "zpool status" output: NAME STATE READ WRITE CKSUM cuve ONLINE 0 0 0 mirror-0 ONLINE 0 0 0

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

On 3/1/2016 9:53 AM, Emmanuel Noobadmin wrote: > However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write fpdma queued". Googling on it threw up old suggestions to limit > SATA link speed to 1.5Gbps using libata.force boot options and/or > noncq. Lowering the link speed helped to

Server is a Lenovo RV-340 E2420 build 70AB001VUX 8go Support for Sata-3 6gbps and Raid-5 Did someone can tell if it can handle 6tb hard drives? -- Michel Donais

Hi... I really hope that somebody can help me to brainstorm this problem. Please let me describe my enviornment. Environment --------------- Fedora 16 x86_64(fully up-to-date) Wine 1.5.1 32bit and noarch binaries only Nvidia GPU - GTS 450 Nvidia Driver - 295.40 (including 32bit libraries) I've installed Perfectworld International under wine. Everything was running fine until the most recent

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

Greetings, I have a samba server deployed. The machine has these: cpu: amd64 -4 cores motherboard :GA-990XA-UD3 with 6 sata ports and StarTech 2 Port SATA 6Gbps PCIe SATA Card memory: 16GBytes disks: raid 10 (6 disks) os: cblfs/linux kernel-3.1.5 pure 64bit and samba-3.6.0 The machine in deployed as a data-storage-device for windows7-based machines doing

Got a bunch of servers from Penguin. Supermicro m/b's H8QG6. We put a 3tb drive in for additional workspace for the users, and some of them won't read, others will go for weeks, then spit out DRDY errors. lshw shows the controller as an ATI SB7x0/SB8x0/SB9x0 SATA. I did notice that it shows *-storage description: SATA controller product: SB7x0/SB8x0/SB9x0 SATA

Dear Xen folk, I''m trying to use xen as shipped with debian 7.0. The system has 13 disks over 3 controllers. When I boot normal linux, I get this (condensed output from lshw): product: MV64460/64461/64462 System Controller, Revision B disk:0 disk:1 disk:2 disk:3 disk:4 disk:5 product: 88SE9172 SATA 6Gb/s Controller disk:0 disk:1

Hi, I took this issue to the Fedora forum initially, but no-one there has been able to offer any guidance, so I have decided to come to the nouveau community directly. I was running a KDE desktop under Fedora 21 successfully, including the ability to use a direct text login on an older card (GXT 560 Ti) with an entirely stock Fedora, fully updated. I simply replaced the old card with an

A customer is looking to replace or augment their Sun Thumper with a ZFS appliance like 7320. However, the Thumper was used not only as a protocol storage server (home dirs, files, backups over NFS/CIFS/Rsync), but also as a general-purpose server with unpredictably-big-data programs running directly on it (such as corporate databases, Alfresco for intellectual document storage, etc.) in order to

Hello, I'm tearing my hair out over this. Any help will be very much appreciated. It's been two long nights battling with RMySQL. > library(RMySQL) Error in dyn.load(x, as.logical(local), as.logical(now)) : unable to load shared library "/usr/local/lib/R/library/RMySQL/libs/RMySQL.so": dlcompat: dyld: /usr/local/lib/R/bin/R.bin Undefined symbols: _getopt_long

First Post! Sorry, I had to get that out of the way to break the ice... I was wondering if it makes sense to zone ZFS pools by disk slice, and if it makes a difference with RAIDZ. As I''m sure we''re all aware, the end of a drive is half as fast as the beginning ([i]where the zoning stipulates that the physical outside is the beginning and going towards the spindle increases hex

Hi, I''ve got similar problem - after HW failure - two of three disks became unavailable and now I''m unable to btrfsck. Btrfs lays on /dev/sdb1,/dev/sdc1,/dev/sdd1 - sdc+sdd became unavailable Here is kernel log: ============================================ Mar  9 23:56:28 ftp2 kernel: [121492.593338] ata7.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen Mar  9

Using Ubuntu-12.10 and tried Xen 4.2.1 and Ubuntu''s Xen with same errors. Since Xen never boots successfully - there is no log message. So I captured the output with video and posted screenshots at http://skippyvondrake.com. Maybe it''s a hardware issue. The motherboard has Intel chipset x58 (if that helps). The first message of interest: hda_intel: azx_get_response timeout