similar to: Fw: Win32 OVERLAPPING IO

Hi all, First, I just realized I''ll need to go back and fix some of the prototype declarations for windows-pr. The callback parameters will now need to be set to ''K''. ReadFileEx is one example of this. For purposes of my question, let''s assume ReadFileEx has been declared like so: API.new(''ReadFileEx'', ''LPLPK'',

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

Hello Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. Thanks for your time to read this. -Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi there Does any one of you know something about R and an implemented RS232-Interface? Are there any packages? Or is it possible to write an extensions or something like that in C/C++ ? The problem is that i should handle the information from a measuring device via the RS232-Interface (probably you know LabVIEW, which provides this functionality). These informations should then directly be

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same

Hello guys. I am new in mac world and in wine apps. I have this singular situation: I have a macbook with wine and winebottler installed. I want to use this exe app: azloader.exe. Ok, wine is able to load it normally. But... the problem is, my macbook has not the RS-232 port. So I bought a RS-232 to USB adapter. I've installed the correct "drive" to use that. I've tried that in

Hello list, I'm trying to reuse a fairly old PC based embedded system. It has no video output at all, no VGA, nothing older, and no keyboard / mouse connectors. The console is on a standard RS232 interface, including BIOS output and the minimal BIOS loader. The BIOS emulates / redirects text output to and keyboard input from the console RS232 interface, but unfortunately, this emulation

Hello all. This is a question that I should be able to answer, but the old grey cells aren't working. My Google-Fu must not be up to snuff, either. I have a MOXA IP-RS232 converter that I'm going to be using over an RF WAN and I need to confirm the actual data rate that I'll be able to achieve. I have the drivers loaded (/dev/ttyr00) and a loopback plug on the end of the device. I

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

I've spent the better part of two working days reading the NUT code and documentation and thinking about typical modern use cases for the software. I'm now questioning whether I want to get any further involved with this project, because it seems to me that the codebase is a huge and complicated pile of machinery mainly aimed at solving problems that no longer matter. I could be wrong

Hi! I'm having problems connecting Ippon Smart power pro 1000 UPS to nut via usb under FreeBSD 7-stable The UPS uses megatec protocol and works fine via RS232 (UPS has RS232 and USB connectors) When I connect USB /dev/uhid0 is created. Tried port=/dev/uhid0 - doesn't work. Kernel rebuild w/o option uhid. On connect I get 2 devices /dev/ugen1, /dev/ugen1.1. Tried both of them.

I am about to retire my Sun Solaris workstation and replace it with a Intel box (A Dell Inspiron 530) running Ubuntu. My UPS (an APC SmartUPS2200) only has a serial port for communicating with its controlling host. The Sun has a serial port, but the Dell doesn't. So ... what kind of serial port should I get? I don't really want to waste a precious PCI slot on a serial card (unless I can

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

Hi Mario, Mario Cassani wrote: > Hallo Arnaud, > some months ago I bought an SBS GC400 UPS. > I came with a kit RS232 + UPSmart CDROM that works only with RedHat 7.0-7.3. > As I use Debian I tried alien with no success. > > Can you please provide me with any hint to understand if my UPS can be managed by NUT? > Can a driver be written, knowing how the cable

Hi all I was wondering if one of you kind gentlemen (or ladies) would assist me in finding the data string required to tell my ups to turn on and off. No more no less :) I guess it would be the actual string of an instant command sent down the rs232 port to the ups. I have no programming experience and have done a list search to no avail. Sorry to trouble you with this. I have a lan to