similar to: conflicting memory types

First the following errors are logged in dmesg: [ 31.891848] mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary [ 32.343580] Xorg:3090 conflicting memory types c0000000-cff00000 uncached<->uncached-minus [ 32.343585] reserve_memtype failed 0xc0000000-0xcff00000, track uncached, req write-back [ 32.344431] Xorg:3090 conflicting memory types fd000000-fe000000

Hi, I don't have ifcfg-eth1 in my /etc/sysconfig/network-scripts. But when I do ifconfig eth1 I can see output as below. If I do ifconfig eth12 , I don't see anything which i am assume is normal. eth1 Link encap:Ethernet HWaddr 00:24:E8:44:DB:CC BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0

https://bugs.freedesktop.org/show_bug.cgi?id=80901 Priority: medium Bug ID: 80901 Assignee: nouveau at lists.freedesktop.org Summary: [NVCF] PWM fan speed too high under kernel 3.15 Severity: normal Classification: Unclassified OS: Linux (All) Reporter: gianni at rootcube.net Hardware: x86-64 (AMD64)

Tested on a NV34. There are reports of this also working on the other nv3x chips. Largely useful for testing software written for NV2x without having the actual hardware available. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- Not sure whether nv30/nv35 have 0x0097 or 0x0597. Even though their respective class numbers are lower, it's still believable they'd support

--- man/nouveau.man | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/man/nouveau.man b/man/nouveau.man index 7c72907..a8dfacd 100644 --- a/man/nouveau.man +++ b/man/nouveau.man @@ -13,7 +13,7 @@ nouveau \- NVIDIA video driver .fi .SH DESCRIPTION .B nouveau -is an __xservername__ driver for NVIDIA video cards. The driver supports 2D +is an

Hallo, while trying to use nouveau drivers with GFX 5500 I've got nothing but hang-ups of my machine. The hangup occurs after I'm trying to start Xwindow (not directly, when machine is booting up). After it occured, keyboard isn't available anymore, and I can't switch machine off gracefully with ATX power button. The test has been done with recommended "4-line

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

Another apparently harmless message.. But I find it quite curious. Especially that they seem pretty harmful in the case of http://bugs.freedesktop.org/show_bug.cgi?id=25393 So my setup is nv35 with a 19' CRT screen connected to vga output. I get random occurrences of this message : [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 161 [drm:edid_is_valid] *ERROR* Raw EDID:

I was wondering if there is actually someone willing to mentor this: > Implement nouveau TV-out support. This will require picking up a card > or two and figuring out how TV encoding works on them (integrated, > separate chip, etc.) then how to program the chip (by reverse > engineering, or because the chip is documented). Then the student > should implement TV-out support as part

http://bugs.freedesktop.org/show_bug.cgi?id=12051 Summary: inserting nouveau.ko failed with kernel 2.6.17 since commit 8a4d7f34d9c0182c466518c6f413d9a039db402d Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: All Status: NEW Severity: normal Priority: medium

I can install xen fine on this laptop. trouble is that I have no output from terminals or X when I use Fedora based distros. Has anything changed in relation to this bug? I''d rather stick to this list to avoid cross or double posting but do tell me if this is the correct list or not. [https://launchpad.net/distros/fedora/+bug/74023] Here''s the output of lspci:- /sbin/lspci -v

hi i have problem with nouveau drivers gpu fan always runs at maximum speed my pc OS: fedora 25 wayland/xorg lspci -v -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CardExpert Technology Device 1187 Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at f6000000 (32-bit, non-prefetchable) [size=16M]

https://bugs.freedesktop.org/show_bug.cgi?id=99841 Bug ID: 99841 Summary: Switching to VT freezes X only on a dual screen Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee: nouveau at

Hi, we have seen proper register numbers when we have generated assembly files through clang but when we generated dump files from object file then we didn't see expected register numbers. Note : all registers are replaced with R0 *Disassembly of section .text:00000000 <main>: 0: 3000ffcc addik r0, r0, -52 4: f8000000 swi r0, r0, 0 8:

OK looking for some constructive critiuquing and ideas. This is just a ruff draft 1. First we need to know what type of graphics card you have. Please do the following at the command window. To get to the command window do the following [root at nVidia ~]#lspci -v "note the difference in board manufactures." These drivers will work on all Aftermarket

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

When I use my phone to make VOIP call and another calls comes from POTS my phone rings to POTS caller. Why? Shouldn't it generate busy signal! -- #Joseph

https://bugs.freedesktop.org/show_bug.cgi?id=107964 Bug ID: 107964 Summary: [GTX970] system hang when using libreoffice Product: xorg Version: unspecified Hardware: Other OS: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/nouveau Assignee: nouveau

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

This will allow the nouveau module to only include support for nv04-nv50, nv50-nvc0, nvc0+ cards individually (or in any combination). Only compiling one of the card types at a time reduces the size of the nouveau module, from 1.3M to 700-800K, depending on the type (including symbols/etc). It should also yield a reduction in compile time as a lot fewer files are compiled. Here are the sizes