Displaying 20 results from an estimated 2000 matches similar to: "[hivex][PATCH] OS X, bootstrap: Locate pkg.m4"
2012 Jun 11
1
[hivex][PATCH v2] OS X, bootstrap: Locate pkg.m4
OS X does not include pkg-config by default. This causes ./configure
to fail when invoking PKG_CHECK_MODULES for libxml2.
This change autodetects the path for aclocal, c/o RWMJ noting the real
problem is a deficiency in aclocal on OS X.
Signed-off-by: Alex Nelson <ajnelson at cs.ucsc.edu>
---
bootstrap | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/bootstrap
2012 Jun 08
1
[hivex] OS X: Augment pkg-config search path
Hello all,
I found OS X still has one remaining issue in the autotools. OS X does not include pkg-config by default, and whatever mechanism installs it places pkg.m4 in some location among:
/opt/local/share/aclocal/pkg.m4
/usr/local/share/aclocal/pkg.m4
PKG_CHECK_MODULES isn't defined if pkg.m4 isn't in /usr/share/aclocal, so ./configure dies without augmenting aclocal's search
2011 Sep 06
1
[PATCH 3/3] Mac OS X: Run glibtoolize in absence of libtoolize
Signed-off-by: Alex Nelson <ajnelson at cs.ucsc.edu>
---
bootstrap | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/bootstrap b/bootstrap
index 79b6717..b2960c1 100755
--- a/bootstrap
+++ b/bootstrap
@@ -36,7 +36,7 @@ autopoint --force
# Autoreconf runs aclocal before libtoolize, which causes spurious
# warnings if the initial aclocal is confused by the
2009 Sep 04
1
[PATCH libguestfs] avoid build-from-scratch failure due to missing daemon/configure
>From cfab42b40752f6dc44971b3c48523b917b374e91 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering at redhat.com>
Date: Fri, 4 Sep 2009 18:00:23 +0200
Subject: [PATCH libguestfs] avoid build-from-scratch failure due to missing daemon/configure
* bootstrap: Don't use autoreconf's --norecursive
option. We require the default --recursive behavior in order
to create
2010 Oct 27
1
[PATCH] Remove ocaml/.depend from git
ocaml/.depend is automatically generated. This patch removes it from git.
---
.gitignore | 1 +
ocaml/.depend | 5 -----
2 files changed, 1 insertions(+), 5 deletions(-)
delete mode 100644 ocaml/.depend
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Remove-ocaml-.depend-from-git.patch
Type: text/x-patch
Size: 495 bytes
Desc: not available
URL:
2003 Jun 07
3
tinc-1.0pre8 fails to compile on RH 9.0
Hi,
I had posted a similar question a few days back(but my mails started
bouncing back, when I tried to post to the newsgroup). So here is it
again.
My System: Rh 9.0 (2.4.20-13.9), openssl-0.9.7a-5, openssl-devel-0.9.7a-5
Autoconf tools: autoconf-2.57-3, automake-1.6.3-5
1. When I try to compile tinc-1.0 pre8 on my RH 9.0 system, it fails..
When I do a ./configure, it aborts saying:
2010 Mar 21
2
Observations on compiling on Mac OS X 10.5 (Leopard)
I started with:
- Mac OS X 10.5.8
- Xcode installed
- OCaml from GODI
- qemu from git
autoconf is really ancient (2.61). It doesn't have AM_SILENT_RULES
and although we tried to make things work when autoconf lacks this by
having:
m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])
AM_SILENT_RULES([yes]) # make --enable-silent-rules the default.
this nevertheless
2018 Apr 10
6
[PATCH 0/5] Some improvements in bootstrap, m4 and configure.ac
Lin Ma (5):
configure: error out if using libvirt backend and no header files
configure: output the default backend in summary
configure: try pcre-config if pcre pkg-config file not found
configure: output clearer message when missing libmagic
configure: support using local gnulib src directory as $GNULIB_SRCDIR
bootstrap | 78
2009 Aug 25
0
[PATCH libguestfs] build: invoke autopoint with --force
Without this, I'd see a warning about an existing
build-aux/config.rpath go by whenever bootstrap ran:
>From 4c1cc009cd04995acd05cfffa3c497403f8c7a55 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering at redhat.com>
Date: Tue, 25 Aug 2009 09:10:21 +0200
Subject: [PATCH libguestfs] build: invoke autopoint with --force
* bootstrap: Invoke autopoint with --force, to avoid warning
2009 Aug 25
1
[PATCH libguestfs 1/2] build: invoke autopoint and autoreconf with --force
The last patch was incomplete, since autoreconf must also be
run with -f/--force.
This change also updates the gnulib submodule to the latest,
in order to pull in the progname change I made yesterday
to give sensible names in diagnostics like this one:
$ ./guestfish --version > /dev/full
guestfish: write error: No space left on device
Once the second change is pushed, you will have
2017 Aug 01
3
configure.ac
Hi,
Just a quick mail to mention that I cannot generate a new configure script
using autoconf or autoreconf. I had edited the configure.ac and thought ...
"oh, that's my fault", but then I tried it on R-patched and R-3.4.1 without
touching configure.ac and had the same problems.
The "building R packages" documentation seems to suggest that "autoconf"
should take
2009 Sep 02
2
[PATCH] internationalisation: Replace autopoint infrastructure with libintl-perl
I noticed that virt-v2v, which is written exclusively in perl, failed to
generate virt-v2v.pot. After much head scratching I also noticed that
libguestfs.pot didn't include any messages from perl sources. Some reading of
libintl-perl shows that a somewhat more complicated xgettext command line is
required, as it doesn't understand Locale::TextDomain syntax by default. After a
little more
2004 Sep 23
2
libtool.m4
It seems that autogen.sh failed when I tried to build theora from svn because
it could not find libtool.m4. With Mandrake 10.0, I have libtool.m4 in
/usr/share/aclocal/libtool.m4
Where is it supposed to be?
Regards,
John
2006 Jul 13
4
Compiling the latest SVN checkout
Hello,
I just checked out the latest version of speex and I want to compile it.
The INSTALL file says that's easy:
bjoern@deimos:~/studium/beleg/resources/svn/speex$ cat INSTALL
Installing Speex is as easy as:
% ./configure [--prefix=<install-path>]
% make
% make install
Note that if you are using the code from SVN, you will need to run
"autogen.sh" instead of
2012 Dec 12
8
[PATCH 0/5] update build system
This patch series modernizes various aspects of the autotools
based build system. There is a lot more that could and should be
done, but I tried to stay conservative for now and just resolve
some of the most obvious issues.
Max Horn (5):
configure: replace XIPH_C_FIND_ENDIAN by AC_C_BIGENDIAN
autogen.sh: replace this by a simple call to autoreconf
configure: always print
2014 Nov 06
3
[PATCH 0/2] hivex: small portability fixes
Hi,
this small series cherry-picks a couple of the portability fixes
recently done in libguestfs to hivex.
There should be no actual change on Linux.
Thanks,
--
Pino
Pino Toscano (2):
normalize iconv handling
ruby: fix detection of ruby library
bootstrap | 1 +
configure.ac | 8 +++++++-
lib/utf16.c | 3 +--
3 files changed, 9 insertions(+), 3 deletions(-)
--
1.9.3
2004 Sep 15
1
building from svn
After downloading libogg-1.1.tar.gz, libvorbis-1.0.1.tar.gz, and
libtheora-1.0alpha3.tar.gz; building and installing them in that order, and
trying the alpha3 theora encoder, I decided to try to build theora from svn.
Using svn to checkout theoratrunk worked ok. The first time I tried to
execute ./autogen.sh, it complained that I didn't have automake. Mandrake
10.0 comes with automake
2013 Sep 04
3
[PATCH 0/2] Clean up compilation from git a little bit
SSIA
Martin Kletzander (2):
Don't redefine _FORTIFY_SOURCE
Get rid of gnulib error
bootstrap | 2 +-
configure.ac | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
--
1.8.3.2
2019 Jan 13
3
[FTS Xapian] Beta release
You copied your Makefile.am?there. Stephan made you a working version, can you try that?
(sorry for dup)
Aki
-------- Original message --------From: Joan Moreau <jom at grosjo.net> Date: 13/01/2019 21:39 (GMT+02:00) To: Stephan Bosch <stephan at rename-it.nl> Cc: Aki Tuomi <aki.tuomi at open-xchange.com> Subject: Re: [FTS Xapian] Beta release
I used the skeleton from Aki :
2013 Jul 22
3
2.2.4 + metadata plugin: autoconf failed
Hello,
I can compile metadata plugin using debian squeeze + wheezy.
But build on suse enterprise server 9,10 and 11 failed.
The metadata plugin require autoconf-2.65 which i too new.
On the other side I can build the dovecot-2.2.4 and pigeonhole-0.4.0 plugin without problems:
dovecot require autoconf-2.59 and pigeonhole does not require any specific autoconf version.
I asked the authors of the