similar to: Which Digium cards to select: AEX with EF or E or P or B?

Hi All, I have a ticket open with Digium, but based on their previous lack of support for the Asterisk Appliance, I'm not really holding my breath - and, honestly, I'm not 100% convinced it's a Digium issue in the first place (but I don't know where else to point fingers). We have an AEX-804E (PCI Express, 4 FXO ports, Hardware Echo Cancellation) in a Dell PowerEdge 1950 with

Please chime in if you've ever wished for digium to make a 4-port daughter board with a combination of 2FXO AND 2FXS ports on the same card. When using the 800 series cards, one must either choose 4-port permutations of FXS/FXO, OR one must give up 2 valuable ports. In other words, when you add ONE 100-series daughter board, you give up TWO of your physical ports. Is there a technical

Hi, Continuing with the saga of Digium vs MTNL Mumbai, looking for suggestions on handling incoming Caller-ID issues. The card manages to grab a couple of (random) digits of the incoming CID, but they're more or less useless. Is there any way to fix this? Asterisk 1.8.13, Dahdi 2.5.0.1 on Debian Testing (Wheezy), MTNL Mumbai. Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)

Hi All; Any one used Digium IP Phones D40? I need to know if they are stable with good voice quality? Comparing to Polycom 330, which is better? Let us talk frankly although I know that we have to support Digium. Regards Bilal

Hi to All, I dont know much about PCI express slots in newer Servers, my doubt is if the Digium and Sangoma PCI express cards, are compatible with the x8 PCI express slots that come in the HP Proliant ML150 G5 server. Thanks in advance. Ricardo -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello there, I'm trying to plot vectors with p<0.1 in a NMDS ordination plot using p.max. Below the scripts I'm using. I guess I'm missing something! could you please give me a hand? species<-metaMDS(species_matrix)ef<-envfit(species,environmentaldata_file,permu=999,na.rm=TRUE)efplot(species, dis="sites")plot(ef,p.max=0.1) Error in plot.envfit(ef, p.max = 0.1) :

Hello, I have several customers describing something like annoying "silence suppression". So I did some tests and I can confirm. After disabling echo cancellation in zapata.conf the "silence suppression" effect is gone, but there is a little echo of course. I do not have this problem on other boxes where I am using oslec as an echo canceller. All my calls are SIP to ZAP (E1).

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>

Hello, Im looking to buy a digium phone D70 unit just for testing on lab; to really understand the phone and features. I cant find any website with opinions; any here? Are they really valuable to the price? (D70 quite expensive) Does the SDK for building apps is usable? Can you build powerfull apps? Examples? Many thanks -------------- next part -------------- An HTML attachment was

Asterisk 11.1 We have a situation where one of our incomings POTS lines will not answer. There are 2 lines configured by the Telco as a rollover group (rings the line that is not busy) and they feed into a Digium AEX410 on the server. The most recent time this happened, I did a /etc/init.d/dahdi status and saw this: ### Span 4: WCTDM/1 "Wildcard AEX410" *53 FXO FXSKS

Hello all, I am getting console debug messages about "tone detected on channel XX, disabling echo cancelation on channel XX" when using echocancel=yes with a Digium T1 card. does this mean that DTMF breaks the echo can? Does Asterisk permanently disable the echo can or is it for that channel instance only?

Hello, I can do simple, "yum install asterisk18-*" and it installs Asterisk and Dahdi-tools/Dahdi-Linux on my OpenVZ container. Everything runs well and smooth. However, if I want to compile dahdi-linux on the same openvz then I get the error, *"You do not appear to have the source for the 2.6.32-4-pve kernel installed".* * * 1- Based on above error and Google search I have

Hey all, We have been using a TDM400 card at work to provide our IVR. We we have upgraded our server and now require the same capability, but on a card that goes into a PCI Express. Any suggestions would be greatly appreciated. oh, and it has to work with the zaptel drivers for linux. thanks all. sk -------------- next part -------------- An HTML attachment was scrubbed... URL:

Howdy All, I'm considering Asterisk / Digium as a replacement to my existing phone switch. I need to continue to be able to push analog lines between multiple buildings in a campus environment. The Digium Analog 410 Card manual states it's not recommended to go beyond 1500 feet distance for an FXS card, and no line should leave the building or be bundled. The 2400 Series Manual does

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

Hello everyone, I see that the "yum install freepbx" from Digium repository actually installs the latest FreePBX which is nice. However, I don't see the old FOP in FreePBX anymore. Is there a way to install FOP or FOP2 through repository? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone knows what should be the configuration of the new solution of Digium for fax in order to send and receive faxes from PSTN to a fax machine through an ATA implementing T38 protocol?

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

Hello! I have a 64 bit Asterisk system and am wondering how to use Digium's 32 bit fax driver. Is there some kind of emulation that can be used? Thanks! Elliot -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090604/b7f1d6c4/attachment.htm

Hi, Until now I've been using my Digium B410P cards with misdn 1.0.x. I would like to upgrade my systems and am now wondering which is the "best" route to take: - use the latest release of misdn v1 - upgrade to the latest "stable" kernel and use the built-in misdn v2 - use misdn v2 as a seperate package (disable misdn in the kernel) - use dahdi's support for misdn