similar to: Problem with Dovecot and AD LDAP auth

Hi, I would like to solve this (simply?) problem: I want to act SUN Solaris samba server (3.0.2a) as domain member in Windows 2000 domain. I made those steps described in documentation: 1. manual creation of Machine Trust Accounts (MTA) 2. in smb.conf: -> security = domain -> workgroup = muxo -> password server = * (I think I don't need add line for on-the-fly creation MTA, when it

Sure, let me reply all here for my finding. @Lars @Guus A’s tinc.conf: Name = bright AddressFamily = ipv4 ConnectTo = aly_hk A’s tinc-up: #!/bin/sh ifconfig $INTERFACE 10.0.0.110 netmask 255.255.255.0 A’s host config: Subnet = 10.0.0.110/32 (VPN address) Subnet = 192.168.31.0/24 (LAN address) IndirectData = yes (enabled for every tinc nodes) The node aly_hk (vpn address 10.0.0.3) connects with

Hi all: I'm not sure where to begin. My setup here is Samba Version 2.2.7a-security-rollup-fix acting as wins for a bridged OpenVPN network (if you know what that means). The net consists of 1 subnet (10.0.0.0/24). The OpenVPN Linux box also runs Samba, ip 10.0.0.110. There are 2 other windows/linux boxes "behind" the VPN server. There are "guests" (Road Warriors)

I have an Audiocodes MP-114 and modem dial-out can not establish connection. Snooping with Wireshark I get a lot of entries like this: No. Time Source Destination Protocol Info 2934 27.221559 10.0.0.110 10.0.0.109 RTP PT=ITU-T G.711 PCMU, SSRC=0x7D08611A, Seq=7662, Time=1805957855 Frame 2934: 214 bytes on wire (1712 bits),

Hello, this morning I apparently had tinc crash on me. In 2 independent tinc clusters of 3 nodes each (but located in the same datacenter), one tinc process crashed in each of the clusters. One process apparently with `status=6/ABRT`, the other with `status=11/SEGV`. Interestingly, they crashed with only 5 minutes difference. The only thing I can come up with that might explain this correlation

I have an issue where at odd times, maybe after 3 days, maybe after a week, people suddenly cant do domain logons. Unfortunately the machine is 50km away so i'm sure theres more details I can glean once I can interogate the users a bit more. Things I have noticed: Anyone currently logged in can still work fine. A restart of samba fixes the issue (till it hapens next). ps ax shows smbd and

hi I keep getting sound dropouts during SIP re-registration, and I can't find a remedy for it. I use SIP friends from MySQL. Below is SIP debug output for the re-registration Thanks in advance roy ------- *CLI> sip debug ip 80.202.161.221 SIP Debugging Enabled for IP: 80.202.161.221 *CLI> Sip read: REGISTER sip:sipgw1.briiz.no SIP/2.0 From:

I've been using Samba for years, though I'm still no expert, and this one has me stumped: I have just upgraded from Mandrake9.1->9.2 which changes from Samba 2.2.7a to 2.2.8a. I am using the same smb.conf file (see below). I can still mount shares okay (though I do have a printing issue I haven't looked at yet) but only by ip address. e.g \\10.0.0.3\nick works but \\ratbert\nick

Hello, I use mysql as passdb backend for my dovecot 2.0.6 installation. I have 2 mysql 5.0.77 servers with master/slave replication enabled. My goal is to ensure dovecot's ability to provide its services even when one of the mysql hosts are unavailable. Here is my passdb backend conf: passdb { driver = sql args = /etc/dovecot/mysql.conf }

On Tue, May 02, 2017 at 09:53:15PM +0800, Bright Zhao wrote: > When tinc daemon get up on A(together with some manual scripts for destination to 8.8.8.8), the route table looks like below: > 10.0.0.0/24 dev tun0 > 10.0.0.3 dev tun0 > 8.8.8.8 via 10.0.0.3 dev tun0 IPv4 packets have only two addresses in their header: the source and the destination address. If you want to send a packet

Hello, I have something like this: SIPUSER <-sip-> ASTERISK <-oh323-> AUDIOCODEC <-e1-> PSTN After calling from SIP to PSTN (and from PSTN to SIP too) I can't hear anything only in my SIPUSER. At the PSTN side everything is OK. I have another network with another h323/sip (in the place of asterisk) and there everything is OK. In AUDIOCODES logs I see that everything goes

I'm having great difficulty debugging this problem.. I'm having intermittant problems connecting to dovecot. This started a couple of days ago following an apt-get update on the server. I'm running Ubuntu 14.04, dovecot 2.2.9. Here's my dovecot -n --- # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.19.0-59-generic x86_64 Ubuntu 14.04.4 LTS auth_mechanisms = plain login

Try to ping from client to server with its hostname. Sounds like dns problem. ping server Then try to ping its ip address. Then try to add server address to host file. Ex 192.168.8.30 server.example.com[1] server Best M On May 26, 2016 12:02, "Nico Speelman" <nico at speelmanrobben.nl[2]> wrote: Hello, I've been trying to add a new server to my Samba 4 Active directory, but

Is it possible to use different port numbers for UDP and TCP? I'd like to open the TCP connection to one port on the remote server and stream the UDP packets to a different port. I've tried specifying both as BindToAddress and Address lines but it always just uses TCP. On 2 May 2017 17:36, "Guus Sliepen" <guus at tinc-vpn.org> wrote: On Tue, May 02, 2017 at 09:53:15PM

SMBv1 (the anonymous thing behind network neighborhood) because of the massive security problems it caused was decprecated. Microsoft came up with network neighborhood and they've shut it down due to their bad implementation. Samba, likewise, doesn't support SMBv1 by default. On 7/12/20 10:29 PM, Michael Jones via samba wrote: > I'm trying to diagnose why my windows 10 clients

If you have 1 member server, you could enabe nmbd in that server. Or install : llmnrd on linux and/or avahi-deamon if you dont have a member. And make sure you can use "proxy dns" as in, The primary DNS domain on linux should match (see in windows) CMD: ipconfig /all The : - primay dns suffix - DNS Suffix search order Then you are able to use \\hostname or \\hostname.FQ.DN.TLD

Hey All I''m Using Xen 3.0.3-105 on CentOS 5.5. It Has to Nics: eth0 - Internet eth1 - Internal Lan ( where Dhcp , DNs , Cobbler - Kick Start Server Resides ) I''ve Set xend-config.xsp to create xenbr1 on eth1 and it looks well So Guest May Get Access TO ALl Resources via the Bridge. brctl show bridge name bridge id STP enabled interfaces xenbr1

A reasonable alternative is to run Christgau's excellent Web Service Discovery host daemon (wsdd) on the samba server and make sure the Function Discovery Provider Host and Function Discovery Resource Publication services are running on the Windows 10 machines. Get wsdd from here: https://github.com/christgau/wsdd.git You can then stop and disable the nmbd on the samba machines as it's

On 08/05/2020 17:38, Lorenzo Milesi via samba wrote: > Samba Version 4.12.1 > > I'm trying to change server IP address from 10.0.0.69 to .3 on a single AD DC running also as fileserver (very small situation). I'm following this [1] guide, I have no interface restrictions in samba or in bind. I stop samba, change IP address, restart bind, start samba, but when I run samba_dnsupdate

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, since some weeks I have a little but annoying problem I want to solve within comming summer break. I am using samba 2.2.11 (debian woody, will be sarge after summer break). It is running in PDC mode and offering file and print services. Up and running smoothly for years now. It is using standard auth against /etc/samba/smbpasswd