Displaying 20 results from an estimated 500 matches similar to: "ATI Mobility Radeon HD 5470"
2003 Jun 13
2
exact difference between RELENG_4, RELENG_4_5 . . . RELENG_4_8
Read the documentation on the meaning of the various 4.X tags, and am
not sure what is meant by this:
"The release branch for FreeBSD-4.6 and FreeBSD-4.6.2, used only for
security advisories and other seriously critical fixes."
Similar descriptions are used for the other RELENG_4_X tags.
If I specify RELENG_4 will cvsup also include RELENG_4_3 to RELENG_4_8?
Sorry folks - I'm
2005 Nov 21
1
mount -u -r drops nosuid ?
Not sure if this is a bug or a feature, but it seems like potential
security risk: I have a ufs fs mounted rw+nosuid, then I needed to
downgrade it to ro, so I executed mount -u -r on it - imagine my surpise
when I found that nosuid flag was removed as well. I know I could have
used mount -u -r -o nosuid, but the present behavior seems to be
non-obvious (update one flag, orthogonal flags dropped
2005 May 14
2
different ways to disable https in apache...
Hello,
I built apache+openssl+mod_ssl. It is working fine,
and I have been starting the server with:
apachectl startssl
Recently, however, I have decided that I will not be
doing anything over https (for a while, at least) with
this web server, so for security reasons, I want to
only run on port 80.
So now I start the server with:
apachectl start
And it runs without SSL. My question is, is
2005 Nov 22
2
ipfw check-state issue
heya
i've been using freebsd's ipfw for quite a while and recently on a new
server i've got this issue with ipfw that i can't understand ... something
is wrong ...
01000 8042 1947866 allow ip from any to any via fxp0
01010 0 0 allow ip from any to any via lo0
01014 9886 4170269 divert 8668 ip from any to any in via vr0
01015 0 0 check-state
01130 14679 5695969 skipto 1800 ip from
2004 Apr 06
11
htb2 -> htb3 problems
Hello!
I need to switch from htb2 to htb3, because of speed issues (for me,
htb2 is unable to handle more then 100mbit duplex with ~550 classes),
kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation.
So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking
and htb3 for queueing), and traffic rate drop from 100 to 20mbit.
What can be wrong? The
2003 Dec 10
4
s/key authentication for Apache on FreeBSD?
I'm constructing a Web server which may require restricted areas
of the site to be used from public places where a password might
be sniffed. The damage that could be done by taking snapshots of
the content from one session with a spy program is minimal. What
the owner of the server does NOT want, though, is to allow unauthorized
parties to gain unfettered access by stealing the password via
2010 Aug 11
1
ATI mobility Radeon HD 5470
Hi , guys:
I have a new Acer laptop and I have installed CentOS 5.5 x86_64 bit.
The problem is that there is no driver for the ATI mobility radeon HD5470
and the graphic is so bad!
On amd-ati website I have found the catalyst driver version 10.2 butit seems
not to be the correct solution.
The current screen resolution is 1024x768, but my laptop is widescreen and
the best screen resolution
2009 Feb 24
4
7.1-R to RELENG_7 upgrade breaks re nic
Hi,
I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after
booting, re0 works for only a short time, then gives "re0: PHY read
failed" over and over. Does anyone have a suggestion on how to debug?
Thanks,
Steve
2013 Jun 19
3
shutdown -r / shutdown -h / reboot all hang and don't cleanly dismount
Hello -STABLE@,
So I've seen this situation seemingly randomly on a number of both
physical 9.1 boxes as well as VMs for I would say 6-9 months at least.
I finally have a physical box here that reproduces it consistently
that I can reboot easily (ie; not a production/client server).
No matter what I do:
reboot
shutdown -p
shutdown -r
This specific server will stop at "All buffers
2003 Apr 30
6
how to configure a FreeBSD firewall to pass IPSec?
I have a FreeBSD box acting as a firewall and NAT gateway
I would like to set it up to transparently pass IPSec packets -- I have
an IPSec VPN client running on another machine, connecting to a remote network.
Is there a way to do this? I can't find any hints in the man pages.
2013 Mar 13
7
amdtemp does not find my CPU.
Hi!
Im running FreeBSD 9.1 on a AMD APU machine:
CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1699.36-MHz K8-class CPU)
FreeBSD 9.1-RELEASE-p1 #0 r243379M: Fri Mar 8 23:16:44 CET 2013
root at pean.org:/usr/obj/usr/src/sys/GENERIC
I try to use amdtemp(4) to read the temperature of this CPU but it
doesnt seem to detect the CPU. The manual states that it should support
K8-class.
The
2003 Jan 15
2
pppoe and /etc/shorewall/interfaces
I am a newbie to linux and shorewall. I am reading the shoreall
quickstart guides. I am a bit confused about the following statement:
----------- quote --------------
The firewall has two network interfaces. Where Internet connectivity
is through a cable or DSL "Modem", the External Interface will be the
ethernet adapter that is connected to that "Modem" (e.g., eth0)
unless you
2004 Apr 05
0
htb v3 question - quantum and r2q again
Hello!
One simple question regaring htb2->htb3 way.
I''m using 2.4.25 kernel with tc3 from Devik''s site, RH9.
My data flow is about 100Mbit duplex and is subject to grow, so
I''m creating root class with 200Mbit rate, with r2q=10,
quantum = rate/r2q, and 1500 < quantum < 200000 (sch_htb.c)
with such r2q my default shaping window will be from 120Kbit to 16Mbit,
2009 Jan 19
4
Description of Zaptel/DAHDI E1 alarms
Hello,
I am missing any description of zaptel/DAHDI alarms. The TE200 series
user manual contains only a description of LEDs states. These alarms
states are visible in zttool/dahditool or in astersick CLI (zap show
status) and I wonder what is the real meaning of these alarms for E1
channel.
Possible alarm states (based on zaptel.h 1.2):
1. No alarms
2. Recovering from alarm
3. In loopback
2013 Jul 26
3
[fdo] Downtime on annarchy for maintenance 2013-07-27
Hi,
Annarchy needs more disk space fairly urgently, so I will take the host
down and add some more disk space tomorrow, Saturday. Work will start
approximately 17 UTC. I hope it will be fairly brief, less than an
hour, but it might take longer if we run into problems
Please get in touch on #freedesktop if you have any questions or if this
is a problem for you.
Regards,
--
Tollef Fog Heen
2003 Jan 19
8
Unable to have pc #2 connect
I''ve set up shorewall with the two-interface mode.
pc #1 eth1 ---> ppp0 ---> Internet eth1: 10.10.10.254
eth0: 10.10.10.1
> via a crossover cable
pc #2 eth0: 10.10.10.2 (gateway=10.10.10.254)
I am able to surf the net with pc #1, but pc #2 is completely cut off
from pc #1 and the net. I am also unable to ping from and to pc #2.
2004 Jul 09
3
tc filter + bridging + htb -- works only if ip_forward = 0
I thought that the below email would be of interest to LARTC readers. I
wasted quite a bit of time tracking down this "feature" (bug?). Any
comments that shed light on this would be appreciated. In short, "tc
filter" + htb + bridging works only with ip_forward off.
Andrew Athan
-----------------------------------------------------------------------
All:
It seems that
2008 May 17
3
DO NOT REPLY [Bug 5470] New: Make check failures on Solaris 10 with rsync 3.0.3pre2
https://bugzilla.samba.org/show_bug.cgi?id=5470
Summary: Make check failures on Solaris 10 with rsync 3.0.3pre2
Product: rsync
Version: 3.0.3
Platform: Other
OS/Version: SunOS
Status: NEW
Severity: normal
Priority: P3
Component: core
AssignedTo: wayned@samba.org
ReportedBy:
2005 Apr 10
1
converting a floppy disk layout to partition layout
Hi all!
I have a slight problem: I have an external disk which contains one big
filesystem (like a floppy) type ext3 (If you ask why: blame udev or
maxtor, or me because I am stupid) which is approx 60% filled.
Now I want to have a partition table, ie a layout where the current
filesystem is the first partition, and the rest is as usual.
Is this possible withotu destroying the data?
Best
2013 May 11
0
HD Voice -- connecting Asterisk into HD Voice compatible mobile phone
I've just noticed that mobile phones are starting to support HD Voice.
http://thenextweb.com/apple/2012/09/21/iphone-5s-hd-voice-impressive-theres-still-work-done/Is
there any hardware capable of connecting HD voice quality calls into
Asterisk now? I see that Asterisk compatible GSM hardware is available, but
does anything support HD voice presently or should in the future?
-------------- next