similar to: Constant ACPI Errors every 5min in dmesg & messages.log

PowerEdge 2850 with PERC SCSI RAID controller. 16GB RAM Dual Intel(R) Xeon(TM) CPU 3.00GHz Using megaraid driver and xfs on 3x 300GB SCSI disks as /dev/sdb (total 572GB) (RAID-5) Stock Centos 6.4 x64, everything updated. Kernel : 2.6.32-358.2.1.el6.x86_64 #1 SMP My Load always shows : top - 10:30:21 up 23:09, 1 users, load average: 0.99, 0.96, 0.79 yet there is no services what-so-ever

Hi, I have updated the firmware for perc raid controller card, network card, IDRAC firmware and the BIOS version on Dell R720 server. I have installed CentOS 6.4 and updated with all the latest packages using yum -y update. # cat /var/log/messages | grep -i error Sep 23 14:09:35 x24 kernel: ERST: Error Record Serialization Table (ERST) support is initialized. Sep 23 14:09:35 x24 kernel: ACPI

Hi there. I'm currently configuring a brand new email server(IMAP) which will run CentOS 6.3 x64. So lots of files on the data volume. I'm confused about stripe size for my data volume. I'm using 2x500GB for OS in RAID1 and 2x2TB SAS for DATA in RAID1 which is hosted on a HP Smart Array P420 Controller with 1GB in Cache/Battery Backed Up. Both these array's are on the P420

Centos 6.2 system with xfs filesystem. I'm sharing this filesystem using nfs. When I create a 10 gigabyte test file from a nfs client system : dd if=/dev/zero of=10Gtest bs=1M count=10000 10000+0 records in 10000+0 records out 10485760000 bytes (10 GB) copied, 74.827 s, 140 MB/s Output from 'ls -al ; du' during this test : -rw-r--r-- 1 root root 429170688 Jun 8 10:13 10Gtest

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: normal My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes" after doing moderate I/O on the local storage, which is a software-raid1 over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs. The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"

Hi! We have a problem that the dom0 very often does not boot and hangs in the hypervisor - see screenshot. The last message is: (XEN) Dom0 has maximum 16 VCPUs (afterwards xen should overwrite the memory) We are using the xen kernel from kernel.org git. Kernel is 2.6.32.24-xen with Xen 4.0.1 Hardware is HP DL380. Is this a known problem? Any hints what could be the problem and how we can

Hi! We have a problem that the dom0 very often does not boot and hangs in the hypervisor - see screenshot. The last message is: (XEN) Dom0 has maximum 16 VCPUs (afterwards xen should overwrite the memory) We are using the xen kernel from kernel.org git. Kernel is 2.6.32.24-xen with Xen 4.0.1 Hardware is HP DL380. Is this a known problem? Any hints what could be the problem and how we can

Hi, I do have one iscsi storage with 4 GBit nics of which currently only one is configured with an ip and which is in productive use by one cent os 6.3 server. Doing some research brought me to the idea to use some nic bonding or multipathing for that storage, but multipathing I did about four or five years ago only once :) Furthormore I can't find the ultimate answer (may be there is not

Hi. Is there any ext3 patch for Kernel 2.4.13 out there. I'v been searchin all day for the patch, but can't find any then patch for 2.4.13-ac2 and others. Do they work with 2.4.13? Could anyone please mail me the link if it's avaiable. Thanks. Cheers, :0) best regards, Svavar Orn Reykjavik - Iceland svavar@fiton.is

Hi all, I have written a COM32 module called "acpioff", that, not surprisingly, powers off a machine using ACPI. I have tested it only using pxelinux.0 with a SeaBIOS/Qemu virtual machine. Since the changeset pulls in a "Linux-ized" version of the open source ACPI Component Architecture, it was too big to post as a patches to the list. See the git pull-request output below.

I guess module ioatdma is missing in Centos 7:- 00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22) ??? Subsystem: NEC Corporation Device 8372 ??? Kernel driver in use: ioatdma ??? Kernel modules: ioatdma # lsmod Module????????????????? Size? Used by autofs4??????????????? 27000? 3 sunrpc??????????????? 267620? 1 8021q?????????????????

Hi, I have one KVM instance (centos 5) that keeps crashing and i see the message log with the following: Oct 14 16:24:48 localhost kernel: psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Oct 14 16:24:49 localhost kernel: BUG: soft lockup - CPU#0 stuck for 12s! [ntpd:2363] Oct 14 16:24:49 localhost kernel: CPU 0: Oct 14 16:24:49 localhost kernel:

Hi, I'm running CentOS 6.5 as NFS server (v3 and v4) and exporting Ext4 and XFS filesystem. After many months that all works fine today the server crash: Jan 30 09:46:13 qb-storage kernel: ------------[ cut here ]------------ Jan 30 09:46:13 qb-storage kernel: WARNING: at lib/list_debug.c:26 __list_add+0x6d/0xa0() (Not tainted) Jan 30 09:46:13 qb-storage kernel: Hardware name: PowerEdge

I have tried sending this before, but it did not appear to get through. Hello, When using gfs2 with quotas on a SAN that is providing storage to two clustered systems running CentOS6.5, one of the systems can crash. This crash appears to be caused when a user tries to add something to a SAN disk when they have exceeded their quota on that disk. Sometimes a stack trace is produced in

My environment is "heterogeneous" my authentication and home server are currently stuck on a 1G shared network, the production servers and storage servers are on a bonded 40G network, all are in the same VLAN. I have about 100 servers on the 40GB bonded network each with 12cores and 128GB of memory. They are running centos 6.6 Except for my storage servers they are all just running

CentOS 6.4 x86_64 Kernel: 2.6.32-358.14.1.el6.x86_64 I have been noticing repeatedly that after a couple of weeks of uptime my NFS server starts to generate the following error: ------------[ cut here ]------------ WARNING: at lib/list_debug.c:26 __list_add+0x6d/0xa0() (Tainted: G W ---

Again, please stop mailing me directly. On 08/16/2016 07:23 AM, Fawzy Ibrhim wrote: > I guess module ioatdma is missing in Centos 7:- I don't think so. I see that module on the host I checked. None of the missing modules appear to be related to RAID: autofs4, cpufreq_ondemand, freq_table, mperf, ipv6, microcode, power_meter. Can you post the output of "dmesg" on your

Hello all. We recently purchased HP Proliant DL380 G7 server and also a HP Lefthand P4500 G2 24TB iSCSI box. The server itself has Quad Ethernet based on the BCM5709 Chipset from Broadcom (NetXtreme II). My main question is about iSCSI offload mechanism, as iSCSI itself is pretty new to me but I have gotten a good hold on it tho. I have managed to setup and configured our Lefthand box into

-> Is there a way to get a date stamp for the dmesg? At least on CentOS7: dmesg -T ----- Original Message ----- From: "Dan Hyatt" <dhyatt at dsgmail.wustl.edu> To: "CentOS mailing list" <centos at centos.org> Sent: Tuesday, October 18, 2016 1:36:46 PM Subject: [CentOS] Lockd: failed to reclaim lock for pid ... My environment is "heterogeneous" my