similar to: udev and mobile broadband

Hi I am trying to connect a reliance netconnect data card on my linux box ( cent os ) , i am able to the detect the device /dev/ttyUSB0 these are the following steps I did : Check your card is recognized by the kernel # cat /proc/bus/usb/devices ..... ..... T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P:

Yes I used. The problem can be the version of Asterisk? I use Asterisk 13 instead of 11. 2016-02-12 14:31 GMT-02:00, Shabbir abbasi <shabbirabbasi92 at gmail.com>: > have changed this > [dongle0] > audio=/dev/ttyUSB1 > data=/dev/ttyUSB2 > > To > > [dongle0] > imei=123456789012345 > > and imei exact same as on your device ? > > On Fri, Feb 12, 2016

Hi! I'm trying to use dongle in my Asterisk But appear for me all time this error [Feb 12 13:49:10] ERROR[13347]: chan_dongle.c:442 do_monitor_phone: [dongle0] timedout while waiting 'OK' in response to 'AT' -- [dongle0] Error initializing Dongle -- [dongle0] Dongle has disconnected -- [dongle0] Trying to connect on /dev/ttyUSB1... -- [dongle0] Dongle has

Yes, I used IMEI. But in CLI appearing nothing and it not register. 2016-02-12 14:27 GMT-02:00, Shabbir abbasi <shabbirabbasi92 at gmail.com>: > have you tried imei discovery > imei=123456789012345 > > > write imei number instaed of 12345... > > On Fri, Feb 12, 2016 at 8:51 PM, Vitor Mazuco <vitor.mazuco at gmail.com> > wrote: > >> Hi! >>

I tried this [dongle0] ;audio=/dev/ttyUSB1 ; tty port for audio connection; no default value ;data=/dev/ttyUSB2 ; tty port for AT commands; no default value ; or you can omit both audio and data together and use imei=123456789012345 and/or imsi=123456789012345 ; imei and imsi must contain exactly 15 digits ! ; imei/imsi discovery is available on Linux only

I have been trying to get an EVDO modem to work with Centos 5. I can make it dial out with wvdial only when I'm the root user. Otherwise I get this error: Cannot open /dev/ttyUSB0: Device or resource busy I added the user to the uucp group. crw-rw---- 1 root uucp 188, 0 Dec 3 02:30 /dev/ttyUSB0 crw-rw---- 1 root uucp 188, 1 Dec 3 02:30 /dev/ttyUSB1 crw-rw---- 1 root uucp 188, 2 Dec

I've a line like this that creates /dev/pilot link in my local udev rules: BUS="usb", SYSFS{product}="Palm Handheld*", KERNEL="ttyUSB*[13579]", SYMLINK="pilot" And it seems to work fine for doing normal sync operation to Gnome Palm applet (well, not sure about that KERNEL parameter, however ttyUSB0 and ttyUSB1 look exactly the same, no other way to

Hi All I am connecting a ups via a usb to serial converter. Works fine, however when the converter is unplugged and plugged back in, udev creates another device e.g instead of ttyUSB0 it creates ttyUSB1. Here is the udev rule that I added to the top of the 025_nut-usbups.rules file in order to create a static symlink should udev decide to create the device as either ttyUSB0 or ttyUSB1.

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus

Hi everyone, I would realy appreciate your help and guidense with a problem I have. Im trying to set up a SMS Gateway as a alert system for my network. Although the Aircard is picked up as a usb device and has a driver in the kernel, it does not have a /dev/XXX device name. So my question is how do I create this /dev/XXX device and make it persistent. I have installed CentOS as my base with

Hi, I'm having trouble getting my Palm to sync with jpilot on my Centos system via USB. When I sync, I get this error in jpilot: pi_accept Illegal seek Exiting with status SYNC_ERROR_PI_ACCEPT Finished I have jpilot syncing fine with this Palm over the network, BTW. For USB, I set things up for udev as described on various websites. Here are the relevant ports & symlink (created

How do you go about configuring comm ports in Wine? I have a usb to serial adapter that is using ttyUSB1 under linux. The program I want to use under wine shows only the standard Windows comm ports; i.e, com1, com2, etc. How can I redirect those to ttyUSB1? dick

A while back I got help in getting my Palm Pilot to connect to CentOS, and through the advice I got here I was able to successfully back up my files to the computer using the CentOS default Palm utility. However, I now want to use JPilot to sync and install files. But when I attempt to sync through JPilot, I get the following error: ******************************* Syncing on device /dev/pilot

Manufacturer: Aviem Power RT 1000-3000VA Description: Rack/Tower Intelligent Online LCD UPS. connected with serial cable. #upsc battery.voltage: 24.96 battery.voltage.low: 21.5 battery.voltage.nominal: 24.0 beeper.status: enabled device.mfr: device.model: device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB1 driver.version: 2.6.3

Hi, I'm trying to download some pictures off my camera and I keep getting an error. This used to work at some point although I can't say when. The camera is a Cannon EOS and I plug it in to a USB port and turn it on and I get a dialog box with a title of "Cannon Digital Camera" saying "You have just inserted a medium with digital photos...blah blah...". When I

On Wed, 19 Jul 2017 16:48:23 +0800 (CST) <wang.yi59@zte.com.cn> wrote: > >* wang.yi59@zte.com.cn (wang.yi59@zte.com.cn) wrote: > > > >> Hi Eduardo, > > >> > > >> Thank you for your reply! > > >> > > >> >On Mon, Jul 17, 2017 at 09:49:37PM -0400, Yi Wang wrote: > > >> > >

From: xu xin <xu.xin16 at zte.com.cn> This creates six drop reasons as follows, which will help users know the specific reason why bridge drops the packets when forwarding. 1) SKB_DROP_REASON_BRIDGE_FWD_NO_BACKUP_PORT: failed to get a backup port link when the destination port is down. 2) SKB_DROP_REASON_BRIDGE_FWD_SAME_PORT: destination port is the same with originating port when

From: Chen Haonan <chen.haonan2 at zte.com.cn> Use kmemdup() helper instead of open-coding to simplify the code. Signed-off-by: Chen Haonan <chen.haonan2 at zte.com.cn> Reviewed-by: Yang Guang <yang.guang5 at zte.com.cn> --- drivers/gpu/drm/nouveau/nvif/outp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvif/outp.c

From: Liao Pingfang <liao.pingfang at zte.com.cn> Fix the comment of virtio_pci_find_capability() by adding missing comment for the last parameter: bars. Fixes: 59a5b0f7bf74 ("virtio-pci: alloc only resources actually used.") Signed-off-by: Liao Pingfang <liao.pingfang at zte.com.cn> Signed-off-by: Yi Wang <wang.yi59 at zte.com.cn> ---

On 1/9/24 07:24, yang.guang5 at zte.com.cn wrote: > From: Chen Haonan <chen.haonan2 at zte.com.cn> > > Use kmemdup() helper instead of open-coding to > simplify the code. > > Signed-off-by: Chen Haonan <chen.haonan2 at zte.com.cn> > Reviewed-by: Yang Guang <yang.guang5 at zte.com.cn> Applied to drm-misc-next, thanks! > --- >