similar to: Disk failure chokes all the disks attached to the failing disk HBA

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

We recently had a disk fail on one of our whitebox (SuperMicro) ZFS arrays (Solaris 10 U9). The disk began throwing errors like this: May 5 04:33:44 dev-zfs4 scsi: [ID 243001 kern.warning] WARNING: /pci at 0,0/pci8086,3410 at 9/pci15d9,400 at 0 (mpt_sas0): May 5 04:33:44 dev-zfs4 mptsas_handle_event_sync: IOCStatus=0x8000, IOCLogInfo=0x31110610 And errors for the drive were

Hi I keep getting these messages on this one box. There are issues with at least one of the drives in it, but since there are some 80 drives in it, that''s not really an issue. I just want to know, if anyone knows, what this kernel message mean. Anyone? Feb 5 19:35:57 prv-backup scsi: [ID 365881 kern.info] /pci at 7a,0/pci8086,340e at 7/pci1000,3140 at 0 (mpt1): Feb 5 19:35:57

Hi all, Today a new message has been seen in my system and another freeze has happen to it. The message is : Mar 9 06:20:01 zfs01 failed to configure smp w50016360001e06bf Mar 9 06:20:01 zfs01 mpt: [ID 201859 kern.warning] WARNING: smp_start do passthru error 16 Mar 9 06:20:01 zfs01 scsi: [ID 243001 kern.warning] WARNING: /pci at 0,0/pci8086,3410 at 9/pci1000,3150 at 0 (mpt2): Mar 9

According to various posts the LSI SAS3081E-R seems to work well with OpenSolaris. But I''ve got pretty chilled-out from my recent problems with Areca-1680''s. Could anyone please confirm that the LSI SAS3081E-R works well ? Is hotplug supported ? Anything else I should know before buying one of these cards ? Thanks, Arnaud

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

Hi all; We have a Solaris 10 U9 x86 instance running on Silicon Mechanics / SuperMicro hardware. Occasionally under high load (ZFS scrub for example), the box becomes non-responsive (it continues to respond to ping but nothing else works -- not even the local console). Our only solution is to hard reset after which everything comes up normally. Logs are showing the following: Jan 8

Hi I am attempting to setup Xen 4.10 with kernel 4.9.86-30 ( virt7-xen-410-testing, virt7-common-testing ) on CentOS7 After installing everything, the machine was unable to boot and hung in dracut stating it could not find its root device. The testsystem I use is a somewhat aged Dell M915 Blade (Quad opteron 61xx), using an MPT SAS controller for it's SAS boot drives. Stock CentOS 7

Hello I have a strange issue, I''m having a setup with 24 disk enclosure connected with LSI3801-R. I created two pools. Pool have 24 healthy disks. I disabled LUN persistency on the LSI adapter. When I cold boot the server (power off by pulling all power cables), a warning is shown on the console during boot: .... WARNING: /pci/path/ ... (mpt0): wwn for traget has changed

On Sat, Sep 19, 2020 at 8:17 PM Akemi Yagi <amyagi at gmail.com> wrote: > On Sat, Sep 19, 2020 at 8:04 PM William Markuske <wmarkuske at gmail.com> > wrote: > > > > Hello, > > > > I ... have come to find out that RedHat deprecated support for a number > of HBAs for 8 including all running the SAS2004 chip. > > > > Does anyone know if there

Hello, I've recently been given domain over a number of supermicro storage servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do fresh installs of CentOS 8 and have come to find out that RedHat deprecated support for a number of HBAs for 8 including all running the SAS2004 chip. Does anyone know if there is a

Hi, My solaris storage hangs. I login to the console and there is messages[1] display on the console. I can''t login into the console and seems the IO is totally blocked. The system is solaris 10u8 on Dell R710 with disk array Dell MD3000. 2 HBA cable connect the server and MD3000. The symptom is random. It is very appreciated if any one can help me out. Regards, Ding [1] Aug 16

torsten@www:/raid/home/torsten > ping rsync.r-project.org PING franz.stat.wisc.edu (128.105.174.95): 56 data bytes --- franz.stat.wisc.edu ping statistics --- 12 packets transmitted, 0 packets received, 100% packet loss Torsten -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send

Hello, I want to create a matrix of N random numbers with a uniform distributions. Later, I want to repeat T times each row of this matrix. For this I do the following loop: N<-45 T<-10 n<-N*T a<-matrix(runif(N,min=-1,max=1),nr=N) mymat<-matrix(rep(NA,n),nr=n,nc=1) for(i in i:N){ b<-rep(a[i,],T) mymat[i,]<-b } Mi problem is that with this loop I can see the output of the

Hi, I am using nsd as my authority-only dns servers and find it fast, stable, reliable - all of the design goals you set out for, great. I have a zone that is intended only to be visible to people on my network. In bind I would enforce this with an 'allow-query' configuration directive. I checked the latest 'nsd-for-bind-users' document, and 'allow-query' is not

I am the maintainer of one of the CRAN mirrors in the U.S., cran.us.r-project.org. It appears that this site has been inaccessible since Friday. This has me puzzled because I can connect to the same machine through ssh and I can see that the http daemon (apache) is running. In fact I can make an http connection from this machine to this machine and from other machines on any of our subnets to

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

I am new to R and I suspect my problem is easily solved, but I haven't been able to figure it out without using loops. I am trying to implement Blair & Karniski's (1993) permutation test. I've included a sample data frame below. This data frame represents the conditional means (C1, C2) for 3 subjects in 2 consecutive samples of a continuous data set (e.g. ERP waveform).

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on