similar to: Bug#675266: xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238

Processing commands for control at bugs.debian.org: > reassign 675266 src:xen 4.0.1-4 Bug #675266 [xen-hypervisor-4.0-amd64] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Bug reassigned from package 'xen-hypervisor-4.0-amd64' to 'src:xen'. No longer marked as found in versions xen/4.0.1-4. Ignoring request to alter fixed versions of

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

Processing commands for control at bugs.debian.org: > close 675266 Bug #675266 [src:xen] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Marked Bug as done > thanks Stopping processing here. Please contact me if you need assistance. -- 675266: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675266 Debian Bug Tracking System Contact owner at

Processing commands for control at bugs.debian.org: > tags 430778 + upstream Bug #430778 [xen-utils-common] xen-utils-common: NAT scripts not generic enough, and made for DHCP ? Added tag(s) upstream. > tags 430676 + upstream Bug #430676 [xen-utils-common] xen-utils-common: network-nat creates insecure nat POSTROUTING MASQUERADE ? Added tag(s) upstream. > tags 603366 + upstream Bug

Hi folks, I've just spent about six hours messing around with an HP DL585 G2 server trying to get CentOS to go. This box is a dual-CPU with dual cores and 10GB of RAM total. According to the datasheet, the POST screens, and the BIOS, it has the Broadcom embedded NICs in it. The problem boils down to the installed OS (4.4 x86_64) not seeing the NICs. If you do an lspci on the system

Hi I recently installed some hba's into a bunch of these 585's as they are forming a RAC cluster - previously to this they were all using DAS without issue. After the qlogic cards were installed i reinstalled the OS and now once installed the OS will not boot - the box just reboots continuously, it does not even appear to get to grud, although this could be the ilo not displaying

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

This is probably a hardware problem but I am posting here in case anyone else has seen it or it is actually software. If you have seen anything like it please let me know. Chuck For the last 1.5 years I have had occasional problems on a large (6.8 TB) Samba server. Two of the mounted filesystems will partially dismount at intervals between 3 days and 3 months. Files will still be open but any

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not sure if it should be there or its absence is a

Using the latest version of syslinux/pxelinux.. When cold pxe booting a HP DL585 G2 (Broadcom NIC), if the pxemenu item is LOCALBOOT 0 and is selected, then a red screen with the following error occurs: Illegal OpCode EAX=000E09AC EBX=00000000 ECX=00000000 EDX=00000000 EBP=00004408 ESI=0000F000 EDI=000045E9 DS=F000 ES=0000 FS=0000 GS=0003 CS:EIP=1000:00000240

I've run into an odd (at least to me) performance issue between a samba server and windows 2003. The windows side is w2k3 w/ SP2 on an HP DL585 with HP EVA SAN storage. Linux is CentOS 5 on a Sun X4200 with samba package samba-3.0.25b-1.el5_1.4and a FUSE mounted filesystem (glusterFS). Watching the network tab of task manager while pulling a few large files from the samba server to the

Hi All, We have installed CentOS 5.3 x86_64 in an HP DL585 server with AMD Opteron 64 bit processor and 16 GB RAM. The kernel version is 2.6.18-128.el5 . Now this has thrown an error message in /var/log/message, Jul 3 21:41:11 db1 kernel: EDAC k8 MC0: general bus error: participating processor(local node origin), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem

Hello All. I've just started looking into Xen and have a test environment in place. I'm seeing an annoying problem that I thought worthy of a post. Config: I have 2 x HP DL585 servers each with 4 Dual core Opterons (non-vmx) and 16GB RAM configured as Xen servers. These run CentOS 5.1 with the latest updates applied. These system both attach to an iSCSI target which is an HP DL385

Hi, I have a problem with isolinux failing to boot a kernel whenever I navigate and trigger the menu via serial console. My test machine is a DL585 G2, with iLO2. Navigating and booting the kernels off of the video console works 100% of the time. With the serial connection however, I _sometimes_ get a "menu.c32: not a COM32R image" error. Sometime it works fine. I suspect the serial

I''m currently using the xen-3.0-testing.hg version with the XEN_TARGET_X86_PAE=y complied dom0/hypervisor. I have an HP dl585 with 28GB but the hypervisor boots and says "(XEN) WARNING: Only the first 16 GB of the physical memory map can be accessed...". Xentop shows 16GB. When I boot a RHEL4 2.6.9 hugemem kernel, I can see all 28GB. Any suggestions? Toby

Hi all! I've been experimenting with Xen on CentOS 5 and RHAS 5 for a while now with mixed success I thought I'd describe my latest challenge. I'll describe this from memory since all the equipment is at work and not contactable from here. I think I've described this config to the list before but here it is again: I have 2 x HP DL585 servers each with 4 Dual core Opterons

Hi, I am trying to build a rock solid XEN High availability cluster. The platform is SLES 11 SP1 running on 2 HP DL585 both connected through HBA fiber channel to the SAN (HP EVA). XEN is running smoothly and I''m even amazed with the live migration performances (this is the first time I have the chance to try it in such a nice environment). XEN apart the SLES heartbeat cluster is

Hi Juergen, I've had a trawl through the SuSE update but it's not clear which patch might impact this issue. However SuSE are usually very good about upstreaming their fixes so I think there is a very good chance this will be fixed in the 4.1 packages in Wheezy. Are you able to give it a try? Thanks, Ian.

Hello, I have found a similar/the same problem on Novell SELS 11 SP1. They have maybe the patches we need... <https://secure-www.suse.com/support/kb/doc.php?id=7005347> BR, Juergen

Hi list, I have installed CentOS on an hp proliant blade server, bl 460c g7, after installing I've seen that network is not working properly. It recognises around 8 interfaces (?), mii-tool says that there is not any link present on those, and there's only 2 NIC' per bay. I've searched on Hp support page but there's only one driver for storage. Does anybody has had the same