similar to: [PATCH] Update diag/mbr instruction to match the current filename.

git://git.zytor.com/users/genec/syslinux.git Branch handoff-mbr-for-hpa This is a piece of code that can be used in place of a MBR or VBR/PBR (master boot record; volume/partition) in order to examine the data handed to the respective boot code. AX, SS, and SP are destroyed before examining anything. I set an internal restriction that limits it to 420 bytes such that it could be used with a

Long story short, my cat jumped on my server at my house crashing two drives at the same time. It was a 7 drive raidz (next time ill do raidz2). The server crashed complaining about a drive failure, so i rebooted into single user mode not realizing that two drives failed. I put in a new 500g replacement and had zfs start a replace operation which failed at about 2% because there was two broken

On Thu, Feb 2, 2017 at 4:43 PM, Phil Turmel <philip at turmel.org> wrote: > On 02/01/2017 10:40 AM, Phil Turmel wrote: >> Hi All, >> >> I've been running Gentoo on a ZBook with great success for a couple years, >> but I've been stymied in my attempts to implement SecureBoot by an >> apparent problem with efifb to nouveaufb handoff, but only when

Hi I have a new ASUS A6Tc laptop with 1.6 GHz AMD Turion dual core processor. I get a strange error: <4>0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4 <4>0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 This only occurs when booting into the xen kernel, not without xen. Can someone tell me why and how it can be fixed? Art

Hi All, I've been running Gentoo on a ZBook with great success for a couple years, but I've been stymied in my attempts to implement SecureBoot by an apparent problem with efifb to nouveaufb handoff, but only when external monitors are attached. The handoff works without issue when the BIOS is in Mixed EFI mode, with and without external monitors, and works in Native EFI mode without

The following changes since commit 7c1b588f9a918b5e251773f0ef4f3812859cc159: H. Peter Anvin (1): Merge remote-tracking branch 'genec/diag-geodsp-perl-for-hpa' are available in the git repository at: git://github.com/geneC/syslinux.git diag-mbr-fix-for-hpa Gene Cumm (1): diag/mbr: Clarify README Jean-Christian de Rivaz (1): Update diag/mbr instruction to match

I have the following upcoming install and I'm trying to do it without having to resort to Digium t1 cards. I have a Cisco IAD2431 being installed by our Carrier. That Carrier will be providing 2 IP Trunks via ethernet handoff into the Cisco IAD2431. The CIsco IAD2431 has Two T1 ports installed and we would have to install a digium card to support those two t1's. What I'd like to do

Is ROR a good fit if I want to edit and expand on a developed script like RoundCube( http://roundcube.net/ )? I''m planing to edit it for my business as an order/transcript application. If anyone is interested this link is what I want to make. http://handoff.wordpress.com/

Hi folks, The recent mention of DECT on this list has got me thinking....... (yeah dangerours!) I have very little experience/knowledge with DECT and mainly where I have seen it used in a multibase base situation where handoff between bases occurr. This has been and ericsson system used as an adjuct to an ericsson pbx on a large multistorey property. If I remember correctly the bases are fed 2

I want to collocate an * box somewhere, where better than where voicepulse chose to put their servers? They probably did their homework and selected someplace where good handoff to the pstn can be found, right/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050520/9f5975b8/attachment.htm

As I've left Sony, I should handoff code ownership of the PS4 triple. Sony is still committed to LLVM and I look forward to continue to work with them in open source. Sony has asked that I nominate Paul Robinson to become code owner. +------------------------------------------------------------+ | Alexander M. Rosenberg <mailto:alexr at leftfield.org> | | Nobody cares what I

Hi, I've installed Centos 5.5 (plus updates) in a machine with INTEL DP43BF motherboard. In order to make Linux detect the PCIs I've added the pci=assign-busses in my GRUB conf. Everything runs fine but within less than 2 days of uptime the machine simply freezes (black console no connectivity). This has happened more than one time so I'm considering to be a problem. The memtest

Hello, I'd like to use the AMI interface to originate a call to a context in a dialplan, and handoff the dial control to the context. Whenever I execute the below action, the recipient does ring, but when I answer it dials the recipient again. I believe this is because once answered the system is going to execute the Context/Exten/Prio in the Originate action? Action: Originate Channel:

Sorry if this has been asked before, but I've searched high and low for the last couple days for an answer. An Internet radio station I DJ for is using Shoutcast and MP3, but we are considering moving to an Icecast/Ogg Vorbis combination instead. We work in 3-hour shifts. When we hand off, the DJ on-stream stops teh encoder, shouts "go" on IRC, and the DJ in line starts his

To reproduce the bug: # mount -o nodatacow /dev/sda7 /mnt/ # dd if=/dev/zero of=/mnt/tmp bs=4K count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB) copied, 0.000136115 s, 30.1 MB/s # dd if=/dev/zero of=/mnt/tmp bs=4K count=1 conv=notrunc oflag=direct dd: writing `/mnt/tmp'': Input/output error 1+0 records in 0+0 records out btrfs_ordered_update_i_size() may return

What are the recommended settings to successfully implement VoIP over 3G/4G data connection. Assume we are talking about using Polycom phones, and the 3G/4G data connection comes from a Cradlepoint router that is plugged in with AC power and has high gain antennas. The device will be stationary, so we will not have to worry about tower handoff?s breaking the connection. This will be for fixed

Hi, well, I was finally able to build syslinux-5.11-pre8 from git, but the system doesn't boot with the self-compiled version. All I see is: http://666kb.com/i/cfplluqpcy6owptq3.jpg Build log can be found in http://www.syslinux.org/archives/2013-July/020452.html After I installed the self-compiled syslinux version, I run this commands: # cd /boot/extlinux # rm -rf *.c32 # extlinux

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

I have had some difficulty creating a bootable ESXi installation media on a USB disk in Windows(Kickstart scripts read by VMwares Weasel are not running properly), it works in Linux. The problem might have nothing to do with Syslinux, but I still want to ask a question regarding Syslinux to be sure there are variations as result of installing Syslinux to a USB drive in Windows vs Linux. In Linux

Hey All, I am setting up a network of Asterisk servers using IAX2. I am wondering if it is possible to disable the handoff feature? At the moment I have 4 asterisk machines, 3 are at SOHO offices and 1 is centrally hosted in a data centre. In addition the central machine has an IAX2 link to a VOIP provider (and might be set up with more in the future). All calls are routed through that