similar to: i am stuck with setup :)

And sorry, I forgot to put log from messages, I always got this: Oct 30 21:06:25 optimus kernel: usb 5-1: usbfs: process 9808 (megatec_usb) did not claim interface 0 before use From: nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00

Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Manufacturer: Aviem Power RT 1000-3000VA Description: Rack/Tower Intelligent Online LCD UPS. connected with serial cable. #upsc battery.voltage: 24.96 battery.voltage.low: 21.5 battery.voltage.nominal: 24.0 beeper.status: enabled device.mfr: device.model: device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB1 driver.version: 2.6.3

On Jan 2, 2012, at 10:51 AM, Vladimir Micovic wrote: >> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > Unfortunately, this device ID is used by several different vendors. What does "lsusb -vvv -d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles

Hi Charles, Thanks for your help. Seems to be mostly ok except am getting error access denied. See below. I see from searching this is a common error but so far I can't find a fix. This is how I configured things before make and install. created group nut nut:x:103: created system user ups with group nut. ups:x:123:103::/home/ups:/bin/bash Create statepath directory. sudo mkdir -p

On Fri, 12 Jul 2019, David White wrote: > Hello, thanks, and sorry for the delay in getting back. I am running the > script and have move the comment from one D= line to the other. I am, > however, seeing some errors written to the console. They are from line > 64-65 of the script. > > Regarding line 64, I have no /usr/sbin/ups* and suspect the proper > location on my

I'm trying to execute some commands on my ups, but I keep getting ERR ACCESS-DENIED upscmd -l sinus Instant commands supported on UPS [sinus]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop -

Dears, I finally resolve my problem, I just make symbolic link: [test at box var/run/]# ln -s -T /var/state/ups/ nut Now I finally got services online: # /sbin/service ups start Starting UPS driver controller: [ OK ] Starting upsd: [ OK ] Starting UPS monitor (master): [ OK ] BUT, on upsc I

On Jul 9, 2019, at 12:22 PM, David White wrote: > > So I guess I am wondering if this is related to my problem. I have no idea how the blazer_usb driver works. For the most part, NUT drivers ending in “_usb” (including blazer_usb) do not need a serial device node in /dev. They use libusb to talk directly to the UPS. (If you can reliably read the UPS status with upsc, then the connectivity

Well it is the season for storms and power outages here in the US PNW. I noticed that today when the power went out, NUT mostly did what I hoped/wanted. But it did not actually turn off the UPS at all. The UPS kept beeping and I had to turn it off manually. I thought that NUT would handle this. But perhaps it cannot for my unit? Or perhaps I have things improperly configured? Any suggestions?

Hi Charles, I am using the same configs as I have in Linux Mint. What do I need to change here? ups.conf [defender] ??? driver = blazer_usb ??? port = auto ??? pollinterval = 5 ??? desc = "PowerShield Defender 650" upsd ??? default.battery.voltage.high = 13.70 ??? default.battery.voltage.low = 10.40 upsd.users [local_mon] ??? ??? password = ******** ??? ??? allowfrom =

Le samedi 12 septembre 2009 ? 01:59 -0300, Vitor Choi Feitosa a ?crit : > Hi Arnaud, Hi Vitor, > I found your email on the contact page and since you seem to work for > Eaton and is involved in the NUT community I think you're the right > person to contact. > > I've got an Eaton NV 1000H and just installed it here. Before NUT > configuration I've checked the HCL

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = usbhid-ups Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone I followed the instructions at this link:

I need to buy a Sager 5125 laptop immediately and I am concerned about the Optimus setup in this model. It comes with a Nvidia 330M/Intel Hybrid. I want to use this with Fedora 13. I do not care if I can switch. I just want it to work. I can also deal with only the onboard graphics working in linux. Do you think the HDMI output will work or I will need the 330M driver for that? I see nvidia

Hello, I'm trying to setup a UPS configuration whereas I have one physical UPS but two UPS entities loaded by the system used by different network slaves. In my ups.conf configuration I have ... [ups] driver = apcsmart port = /dev/ttyS0 desc = "APC UPS" [qnapups] driver = dummy-ups port = ups at localhost desc = "APC UPS for

There was a proliferation of duplicated checks for runpm == -1 && optimus. Instead of continuing that tradition, get rid of all of them, only doing the optimus computation once on load. This should hopefully fix secondary cards suspending and then being unable to come back in non-optimus setups. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> Cc: <stable at

I have a Dell 500w UPS and it works great with Ubuntu 12.04 LTS and Network UPS tools 2.6.3 via usb. This powers a standalone server for the purposes of clean shutdowns. This was installed using "sudo apt-get install nut" and there are no issues with the Server > nut > ups chain. I am using the usbhid-ups driver and haven't had any issues. I am trying to also add an NAS to the

Hi Is VGA passthrough with an nvidia optimus laptop remotely feasible? For those who don''t know, nvidia optimus is two hardware cards, connected to the same display. One sandy bridge setup (I use the intel driver for this), and one nvidia card. I have a laptop with this setup, and usually I''m using only the intel card. I then use acpi_call to power down the nvidia card. To use

Hi, Here are two patches to fix an issue reported on kernel bugzilla (infinite loop due to unchecked function) and a more important fix to fix hanging Optimus machines when runtime PM is enabled (with pm/pci patches). These are the final patches targeting v4.8. Changes compared to v2[1]: collected R-b from Hans and Mika and fixed a minor comment style issue. I recommend it to be merged before