similar to: System on time

Hi, I had the following problem today. Because of a misconfigured network switch one system suddenly didn't have any network. After a reboot (with the network still unavailable) NTPD refused to start. Most likely because the initial ntpdate failed to work. I find this troubling, because when the network was restored, NTPD could have resumed working (like I'd expect from a true

Is there a package to do this? Normally the hardware clock is set during shutdown if one is running ntpd. But if a long-running server shuts down unexpectedly, this isn't done, and the hardware clock might be off by a lot when it comes back up. So setting it periodically from a cron job could be useful. What do others do? Adding a one liner to /etc/cron.daily that invokes

Hi. I run peridocally (from cron) on all of my machines 30 * * * * root /sbin/hwclock --systohc All of those machines in question take their time via NTP from the same local server, and that server gets its time from a ntp pool. Now I had to reboot a couple of them two days ago and to my surprise all had problems with the time upon booting. Here are the important files: [root at XXXXXX ~]

Hi, the date jumps within 30 seconds to a wrong value. ntp service is stopped at the beginning. Whereas hwclock seems more precise. [root at kerio ~]# service ntpd stop Shutting down ntpd: [ OK ] [root at kerio ~]# ntpdate 0.centos.pool.ntp.org 13 Mar 07:04:48 ntpdate[23003]: step time server 131.234.137.24 offset -3450.678273 sec [root at

Hey all, I was watching some logs on a domU today and i suddenly noticed that the timestamps were off by something on the order of 47 seconds. I was surprised because *I don''t* run independent wall clocks. I checked some other domUs and the "drift" was also very close to that of the first domU. I also checked another dom0, Here the domUs were "only" out of sync by

Hi, I would like to sync my CentOS 6.3 hardware clock time to my NTP server's time. Can I do that without reboot the hosts? If yes, it would be great if anyone of you can provide me steps to do that. I am newbie in CentOS. Thanks, Anand Singh

Hello, in system-config-date i have checkbox synchronize date before service startup. Which config switch,file does it affect? I want to turn it on on my CentOS machine without xauth , just editing config files , i was hoping it could be in /etc/sysconfig/ntpd but no. Thanks in advance! D. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey, I have rather new installation of xen, dom0 is running ntpd and is perfectly in time. All domU''s are ~23s in future. Running ntpd on the domU''s seem to have no effect, /proc/sys/xen/independent_wallclock appears to have no effect. I''m running xen-unstable and 2.6.16-rc4 in AMD64 box. Any tip would be appricated. Thanks, -- ++ytti

https://bugzilla.samba.org/show_bug.cgi?id=4168 Summary: Random file has vanished when syncing clock with ntpdate/hwclock ? Product: rsync Version: 2.6.4 Platform: x86 OS/Version: Linux Status: NEW Severity: major Priority: P3 Component: core AssignedTo: wayned@samba.org

I thought I'd play with making my system an ntp server. I did the "service ntpd start" it started OK. on my laptop I did "ntpdate IP" and it says no server for sync found. My firewall has open ntp:udp What did I miss? Thanks, Jerry

Hi. Thanks for answering. Le 2015-09-23 17:34, Dominique Ramaekers a écrit : > Linux has two methods to use ntp: > > ntpdate: > It will run once at boot time to sync time. (This is probably > installed on your system) > It will not run after suspend and resume... => no correction Nope. This is not installed on my system. > ntpd: > Continuously adjusts time. The

Hi, I followed the discussions regarding the "time moved backward" problem and the use of ntp in such cases. At our department we are running two dovecot servers within an vmware server environment, and unfortunately the timedrift (with ntpd active) exceeds sometimes up to 30 minutes virtual drift within 10 minutes realtime (mostly into future). This is due to some overcorrections

Le 17/11/2019 ? 14:15, Jonathan Billings a ?crit?: > I?m curious why you list these as ?cruft? packages? > > chrony > firewalld > iperf > NetworkManager-libnm * chrony: I'm using ntpd and ntpdate * firewalld: https://github.com/kikinovak/firewall * iperf: replaced by iperf3 * NetworkManager: great on laptops, useless on servers > > Also, I?m sure it?s helpful for

The time appears to be perfect inside dom0, however all the domU''s tend to have a slightly faster date which gets further out of sync every day. I''m currently using Xen 3.0.3 with Gentoo Linux, under 3.0.2 I had no problems with domU clocks. Are there any known issues which could cause this? I''d strongly prefer not to run ntpd in every domU, having all domU clocks in

Hi, using SLES10 I''m unable to synchronize the time of DomU with that of Dom0. There is a persistent offset of about 3 seconds! Here''s a small history (not actual output): remote refid st t when poll reach delay offset jitter rkdvmso1.dvm.kl 192.168.0.11 5 u - 64 1 0.136 -2977.1 0.099 *rkdvmso1.dvm.kl 192.168.0.11 5 u 2 64

Hi friends, I am running Nagios 2.7-1 on Centos 5.0 32-bit hosted on Vmware ESX 4.0. The issue I am seeing on the server is sometimes nagios is showing the below messages in /var/log/messages and as the system time gets changed some false alarms gets generated. I searched it on the google but I am not able to find the correct solution. I even posted on the nagios forum and they asked me to see

Hi all. When resuming guest after suspend, the time is wrong (because the guest doesn't know it has been suspended). Apparently, ntp running on the guest doesn't solve this. At least on Linux system. I read it works on Windows guests. I don't understand why, so I'd appreciate a link to an explanation, but I understand it is out of scope for this list. The HW clock is correct and

Le 17/11/2019 ? 18:56, Jonathan Billings a ?crit?: > You should never be using ntpdate anymore (which is why the ntp project is deprecating it, http://support.ntp.org/bin/view/Dev/DeprecatingNtpdate <http://support.ntp.org/bin/view/Dev/DeprecatingNtpdate> ). I really only ever suggest ntpd unless you?re running an NTP server that provides NTP service to your network, and needs to

Hello ! Just a quick question about time synchronization between xen dom0 and domUs... We''re running Xen 3.1 64-bit, with 32 and 64 bits linux guests. It''s up since 89 days and the domU''s time is around 5 minutes behind the dom0, which is updated via ntpdate... Any idea why it doesn''t sync the guests even that /proc/sys/xen/independent_wallclock is 0 ?

OK, So what you people say is : 1. Run "ntpdate" during startup only once 2. After that, keep time with ntpd Right ? Regards, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis