similar to: Iomega REV Drive

I've finally been able to capture the panic, as now it occurs even with DDB configured. Of the six machines I have running 6.1-RC (CVSupped today), this is the only one that does this. /boot/kernel/kernel text=0x30c488 data=0x3b6a0+0x3170c syms=[0x4+0x46430+0x4+0x58da4] no such file or directory - Hit [Enter] to boot immediately, or any other key for command prompt. Booting

Hi, All. I'm trying to use HP Suresore 24e on FreeBSD 4.8-STABLE (Mon May 12 09:32:15 YEKST 2003). The system is installed on Asus P2b-DS motherboard with Adaptec aic7890 onboard scsi-controller. I have 2 SCSI-3 HDDs attached to it: da0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device da1: <IBM DDYS-T09170N S80D> Fixed Direct Access SCSI-3 device and I'trying to

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

[ Asked on -questions on Friday; re-asking now on -stable without cross-post] I recently upgraded a 4.11-REL machine to 6.0-REL and have run into some snags. While the installation from CD went fine, after configuring and enabling my ed0 NIC, bad things start to happen. FWIW, this machine is an ancient (hardware circa 1991, BIOS circa 1994) dual-Pentium 133 MHz machine, with EISA/PCI and

Author: phitran Repository: /hg/zfs-crypto/gate Revision: 471d2d3804fd4faed9fded5d070315c288917655 Log message: 6334882 format -e does not see the USB Iomega Rev Drive Files: update: usr/src/cmd/format/startup.c update: usr/src/uts/common/sys/dkio.h

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

FreeBSD 4.1.1-RELEASE #1: Tue Oct 10 18:09:51 CDT 2000 root@test-drive.tamu.edu:/usr/src/sys/compile/TEST-DRIVE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM

I am attempting to create a folder for my wineprefixes on my external hard disk. The plan is to symlink to that location from inside my user folder (ie. ~/.wine/PREFIXES -> $iomega/.wineprefixes) For reference: $iomega=/media/Iomega_HDD This is a 400GB external drive with a single NTFS partition. The plan is to create folders for all my WINEPREFIXes at $iomega/.wineprefixes (Example:

Is there anyone out there who has installed FreeBSD on the above Sony laptop ? Both ''cat filename > /dev/dsp0.0'' or ''vlc cdda:///dev/acd0@1 are OK. If I run ''cdcontrol -f /dev/acd0 play'', there is no sound. But the output of ''cdcontrol -f /dev/acd0 status audio'' is alright. (same behaviour for cd0 instead of acd0) And the output

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

Hello, while reading/writing dvd on 6-STABLE (can't remember on 7-STABLE right now), I'm getting the message buffer filled by errors. This is my dvd-rw $ sysctl dev.acd.0.%desc dev.acd.0.%desc: PIONEER DVD-RW DVR-109/1.58 attached to $ sysctl dev.atapci.1.%desc dev.atapci.1.%desc: VIA 8237A UDMA133 controller And the followings are some examples of the error:

I believe that I'm having some problems with a Zip 100 drive and the "new" (not really so new anymore) ATA driver. I added a Zip and a new CD-R device to a system over the weekend. The BIOS identifies all of the new devices just fine, but when I boot FreeBSD (the only OS on the system), I get to the ATA probes and things lockup (these are from notes, not exact), ad2: READ command

Hello. I use Centos 4.1 When I inserted my usb 2.0 disk for the first time it created the mount point /media/usbdisk just fine. Which I used to mount the disk. But as soon as I used it in another computer (winxp) when I took the usb back to centos the mount point had become /media/IOMEGA (yeah it's an iomega driver) but then as time goes by, the mount point every time the disk is used

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

Read on Binary Freedom back in February that Chris & Jack had gotten Ogg Vorbis to work on an Iomega Hipzip. is that firmware upgrade available for download anywhere? -Evan --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org' containing only the word

I have an Iomega NAS 1TB drive that I am using as just kind of a file sharing solution between all of my computers. Of course it is on a timed backup with my server however it just serves as a temporary solution for a bigger problem ( IE 15 different puters of all various OS Flavors). However I am not able to connect to any network storage server such as Windows PC's or NAS Storage using map

When I use smbclient to access an IOMEGA NAS server, smbclient tries to access port 445 for a full five minutes before timing out: [2004/02/20 17:48:24, 10] lib/gencache.c:gencache_get(262) Returning valid cache entry: key = NBT/NAS_120_1#20, value = 192.168.123.161:0, timeout = Fri Feb 20 17:53:22 2004 [2004/02/20 17:48:24, 5] libsmb/namecache.c:namecache_fetch(201) name