similar to: Adaptec 1200A No longer supported?

Hi, I've installed a FreeBSD (stable 9.2) as a guest on ESXi 5.5. I've added Adaptec Controller via passthrough. Unfortunately FreeBSD does not show hard drives. Any clue? aac0: <Adaptec RAID 5805> mem 0xfd200000-0xfd3fffff irq 18 at device 0.0 on pci3 aac0: Enabling 64-bit address support aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0:

Hi, Basically as the subject says, I'd like to know if anyone is using the Adaptec 3410S Raid card with FreeBSD. If so, I'd like to know what your experiences are. I've been using the 5400S card for a few years, but it appears to have been discontinued, so we're looking at possible replacements. Thanks! John

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 1) Has anyone been able to get their AIC-9410 controller recognized in CentOS 5.3? I'm working with a Supermicro X7DBR-3 motherboard. It has 2 "ICH Raid Codebase" options in the Bios (Intel and Adaptec); neither of which seem to change Linux's behavior. The interesting part though, choosing either Adaptec or Intel, then performing

We've got this PC PitStop RAID box (they're so proud of it, there's no logo), and what lspci tells me is an Adaptec AAC-RAID (ref 09) controller. I see there's no F/OSS controllers for it, but when I go to Adaptec's site, the search denies all knowledge of such a controller. I'd like to get the correct one, and I really want an x86_64 version; googling found me a 386 rpm.

Hello, I just recently purchased two new Supermicro servers: SYS-6025B-3R SYS-6015B-3R Both of these have an Adaptec AIC-9410 SAS controller in them, that is apparently not detected (or supported?) by FreeBSD (amd64) (7.0 or 7.1 RC1) Is there any way to get FreeBSD to detect this controller (and drives on it)? I found some conversations from 2006 about this, but no updates since. Thanks in

I have a Supermicro SuperServer 6025B-3V with their X7DB3 mobo. It has an onboard Adaptec SAS RAID controller and has been configured as a RAID1 with two Seagate Cheetah 15k.4 disks. Original attempts at installing CentOS4.4 x86_64 appeared to load the aic94xx driver, but then reported something like "No hard drives found...". I grabbed the x86_64 aacraid driver disk from Adaptec

Hi. I''ve used ghost for change the ide disk for an array of scsi in raid using an adaptec controller 2110s. Now when I boot it didn''t boot correctly. Looking for in Internet (http://kbase.redhat.com/faq/FAQ_46_4969.shtm) I guest that I have to rebuild the initial ramdisk to contain the proper kernel modules for the adaptec controller. But what is the kernel module for

I have just built a new SunFire X4100 server with an Adaptec 2230SLP RAID card using FreeBSD 6.2-PRE kernel (from September 20). Everything is working extremely well except I cannot run the aaccli utility on this controller. When I try to open the controller, it gives this error: Command Error: <The current AFAAPI.DLL is too old to work with the current controller software.> On

Am 2019-08-05 12:24, schrieb Ralf Prengel: > Hallo, > has anyone a hint how to use an Adaptec RAID 51645 under Centos 7? > > A volume is created using the controller interface but isn't active > under centos. > > Thanks for hintsts > Ralf That's a pretty old RAID controller. Kernel module support for such old cards have been dropped by RHEL. Check the ELrepo for

Hello I'm running centos 3 and a raid 5 array running in good order however I'm trying to install some monitoring for the raid array using dptapps-static-3.1.24-1.i386.rpm and run it but this fails: [root at ns1 Scripts]# /usr/dpt/raidutil -L physical osdIOrequest : File /dev/dpti17 Could Not Be Opened Engine connect failed: COMPATIBILITY number Has anyone a rpm for a supermicro

I'm trying to install the Adaptec Storage Manager for the 21610SA SATA RAID controller on Centos 5.5. rpm reports that it failed on the dependency on libstdc++-libc6.1-1.so.2 yum provides */libstdc++-libc6.1-1.so.2 reports no matches found How can I install the required files to all the Adaptec Storage Manager to be installed?

Hallo, has anyone a hint how to use an Adaptec RAID 51645 under Centos 7? A volume is created using the controller interface but isn't active under centos. Thanks for hintsts Ralf

Hello everyone, I'm trying to install the CentOS 4.4 Server CD on old hardware. The hardware is a Dell PowerEdge 2300 with Adaptec 7890 and 7860 controllers. It's the first time I've done a Linux install with hardware RAID. However, I'm having trouble getting CentOS (as well as Fedora Core 6) to detect the SCSI hard drives. When it comes to the part where you choose where to

Hello, While shopping for another 3Ware card, I found that this market has gotten much larger since I bought my 6500. So I started looking at the various cards while browsing the hardware notes for FreeBSD 4.8 and 5.1. So I'm wondering if anyone can provide some insight here. -3Ware has a whole new series of cards. The twe(4) manpage states that only 5xxx and 6xxx series cards are

I know I saw some other posts on this in the archives, but I wanted to see if there was any new information. I have MANY Intel servers (SR1200, SR1300, etc.) that are using the Adaptec 2010S, 2100S, 2110S and 2120S SCSI RAID Controllers. They are currently running CentOS3.4 and everything works great. From what I know, these cards should be able to use the i2o_block driver which is part of the

Hi all, Centos 5.6 doesn't detect any disks connected to an Adaptec 6405 RAID Controller. The hardware isn't brand new to the market, so what might be the issue here? It seems, that the driver is missing for that particular card. All best, mjb

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

Can anyone tell me if/when the Adaptec AIC9410 SAS/SATA controller will be supported? Michael Grant

Hi All, I need to install CentOS 4.0 x86_64 using Adaptec ASC-29320A with HostRAID enabled, but it seems my card isn't recognized. I've tried to install the hardware using driver downloaded for RHEL 4.0 from the Adaptec Website, but still it's unrecognized. P.S. I'm able to install RedHat 9.0 using this card before. Is there anyone have any solution for this? Thanks and

Hi I have (actaully on a number of machines) various Adaptec card installed, yet lsmod shows "dmraid" loaded? How come? I thought that dmraid is software raid? Is this part of the booting and if so How do I tell mkinitrd NOT to make it part of the bootup process? Jobst -- When you lose, don't lose the lesson. | |0| | Jobst Schmalenbach, jobst at barrett.com.au,