similar to: Great job to all who work on FreeBSD!

I am having problems on with locally generated mail on a box (production) that was just updated to 4.8-RELEASE from 4.62 After trying all manor of cures noted by others here and in google I have managed to get past the permission denied messages in the system log, but not in maillog. I now have all of today's local form submissions and my command line test mails backing up in

Hi, Running 1.4.26.1 here. I have installed TE420B card in my server, and followed the appropriate steps (as far as I know to configure it). This TE420B is connected to a CLEC (T1s), so I am using pri_cpe as singalling type. When I dial out, I get this message: Dec 4 11:37:31] WARNING[27983]: app_dial.c:1275 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0

# Span 1 span=1,1,0,esf,b8zs bchan=1-23 dchan=24 echocanceller=mg2,1-23 # Span 2 span=2,2,0,esf,b8zs bchan=25-47 dchan=48 echocanceller=mg2,25-47 # Span 3 span=3,3,0,esf,b8zs bchan=49-71 dchan=72 echocanceller=mg2,49-71 # Span 4 span=4,4,0,esf,b8zs bchan=73-95 dchan=96 echocanceller=mg2,73-95 # Global loadzone = us defaultzone = us Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"

I keep getting a red alarm when trying to setup asterisk to use my TE420B EC. I only have a blank context setup in my extensions.conf as I haven't started to config that until I can clear this red alarm. I don't have physical access to the server, so I can't go reseat the modules/card/ethernet cable, though I have hands on location that have done this a couple times

Dear All; I am afraid from IRQ misses: 1 The ISDN E1 was working fine on the machine, the electrical disconnected and then the Red Allarm. I checked the dahdi and I found that I have to reinstall dahdi again and I did. But still not becoming UP. The output of the cat /proc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)? [root at CC

Hi, I've searched and searched on the possible problems. If anyone can help me that would be great. Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF CRC4 error count: 4750 E-bit error count: 5023 Timing slips: 72 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) 3 TE2/0/1/3 Clear (In

https://bugs.freedesktop.org/show_bug.cgi?id=99900 --- Comment #24 from kong <riverkong.28 at gmail.com> --- In 4.12.12 on fc26. X hang and hang again randomly, and logged like this: nouveau 0000:01:00.0: gr: DATA_ERROR 00000005 [INVALID_ENUM] ch 18 [007f294000 Xorg[2256]] subc 0 class a197 mthd 19c8 data 00000000 nouveau 0000:01:00.0: gr: ILLEGAL_MTHD ch 18 [007f294000 Xorg[2256]] subc 0

https://bugs.freedesktop.org/show_bug.cgi?id=99900 --- Comment #27 from aaron.hamid at gmail.com --- I am encountering the same "kernel rejected pushbuf: Device or resource busy" crash/lock cited here and in https://bugs.freedesktop.org/show_bug.cgi?id=100567 I'm posting here as I don't see SCHED_ERROR in my systemd journal, and I can reliably trigger it by running qemu android

During the last two weeks there has been some discussion in freebsd-questions and freebsd-stable about the prospects of FreeBSD support for some motherboard devices associated with the Intel 865PE/875P and ICH5/ICH5R support chips now showing up in recent motherboard designs. The 865PE/875P chips are called MCH (memory controller hub) or "northbridge" chips. The ICH5/ICH5R chips are

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

The card you installed has FXO or FXS modules in it ????? are you getting your lines directly from the telco co??? Doug D On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent: * -----Original Message----- * From: Todd Reese * Reply-to: Asterisk Users Mailing List - Non-Commercial Discussion * To: asterisk-users at lists.digium.com [3] * Subject: [asterisk-users] Dahdi

Well, you don't give much of an example.... I'm replying CC to the R mailing list. Please ask questions there, rather than adressing individuals for basic help. Here is one; does it answer your question ? data(agriculture) ag.ag <- agnes(agriculture) class(ag.ag) pltree(ag.ag) # the dendrogram, if you want to see it ## cut the dendrogram -> get cluster assignments: (ck3 <-

Mulberry client-side message filtering can be persuaded to search for a nonexistent message ... <tag> UID SEARCH UNSEEN UNDELETED UNDRAFT 12 (OR FROM "Cron Daemon <sthen at eeyore.37.spacehopper.org>" SUBJECT "Cron <sthen at wide> /home/sthen/pingme") Dovecot 0.99.10 returns this ... <tag> NO Sequence out of range: 12 I *think* the correct

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

Hi.. Well i've tried each and every method to insert any winme command.com into any bootable image and its really giving me problems.... I even further tested the same image with reinserting the 98 command.com and the image worked just fine.. So acc to me the problem has to lie in me command.com as there is no real mode dos in ME.. Also try using umbpci.sys and lowdma.sys for managing

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

Hello, My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port modular card and a single FXS module. Got the Rhino card installed and the machine sees it: root at pbx:/etc/dahdi# dmesg | grep rcbfx [ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at ffffc90008d7c000 [ 71.985504]

I constructed an LLVM 2.7 VS solution with cmake, but it has 66 projects: ALL_BUILD, ".\ALL_BUILD.vcproj" BrainF, "examples\BrainF\BrainF.vcproj" Fibonacci, "examples\Fibonacci\Fibonacci.vcproj" FileCheck, "utils\FileCheck\FileCheck.vcproj" HowToUseJIT,

We have been distributing asterisk servers for several years now, and early on decided that hardware echo can was the way to go. Our first few boxes without it had horrid echo problems, and attempts at tuning in 2006 didn't make any difference. We installed a new server yesterday at a client's location with a Rhino 4 port FXO card (HW EC included), and when an inbound call was

I have a system with 3 video cards; 2 dual-DVI and one single DVI. I'd like to get nouveau running on this system. selene:/var/log# lspci | grep VGA 01:07.0 VGA compatible controller: nVidia Corporation NV34GL [Quadro NVS 280 PCI] (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] (rev a1) 07:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro