similar to: g_vfs_done with offset greater than disk size

Hello, while reading/writing dvd on 6-STABLE (can't remember on 7-STABLE right now), I'm getting the message buffer filled by errors. This is my dvd-rw $ sysctl dev.acd.0.%desc dev.acd.0.%desc: PIONEER DVD-RW DVR-109/1.58 attached to $ sysctl dev.atapci.1.%desc dev.atapci.1.%desc: VIA 8237A UDMA133 controller And the followings are some examples of the error:

I've been trying to sync two directories under interix between two machines on the local network and I keep getting the flowing errors:- The first error is "failed: Bad address (14)" which always occurs rsync: readlink "/dev/fs/D/Media/Audio/The Hoosiers/desktop.ini" failed: Bad address (14) The second is randomly occuring, restarting will make it continue for a bit then

I am trying to upgrade my system from 500GB drives to 1TB. I was able to partition and sync the raid devices, but I cannot get the new drive to boot. This is an old system with only IDE ports. There is an added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system

Seems our current libarchive? That support FreeBSD's tar implementation has a bug where it can create archives it cant read back. This can be seen by simply creating an empty tar.gz file and then trying to expand or list it. In doing the above you get the following error: tar: Unrecognized archive format: Inappropriate file type or format N.B. gtar can list and expand the created file

I have a FreeBSD 6.2-based server running a 1.2TB graid3 volume, which consists of 5x 320gb SATA hard drives. I've been getting errors in /var/log/messages from the graid3 volume, which I suspect means an underlying fault with one of the disks, but is there any way to decipher which one of these drives is throwing errors? I've checked smartctl -a /dev/adXX but nothing shows up there..

The progress fix listed [quote] - If rsync exits in the middle of a --progress output, it now outputs a newline to prevent the progress line from being overwritten. [/quote] Appears to not work. == Test 1 == CTRL+C is used to abort:- rsync -av --whole-file --progress -e "ssh -p 23" test1:/test/ /test/ receiving incremental file list zone/english/ zone/english/mp_carentan1.ff

All seems to compile ok but I get the following warnings on interix 3.5 flist.c: In function `recv_file_entry': flist.c:840: warning: comparison between signed and unsigned flist.c:874: warning: comparison between signed and unsigned flist.c:876: warning: right shift count >= width of type flist.c: In function `make_file': flist.c:1178: warning: comparison between signed and unsigned

While transfering files from a win32 host here running interix aka SFU it keeps constantly failing with various errors see below. Both ends are running 3.0.5 on the same network. Also the transfer speeds are really slow, has anyone had this before and is there anything we can do to investigate the issue? receiving incremental file list content/misc/elbonio/ content/misc/elbonio/clickfire.zip

While trying to speed up nanobsd builds, I mounted /usr/obj on a ramdisk and found my box crashing. Thinking it might be hardware, I tried a separate machine, but with the same results. I have 4G of ram (i386). Am I just running out of some kernel memory ? If so, is there anything I can adjust to prevent this, yet still use mfs in this way ? mdconfig -a -t malloc -s 1800M newfs /dev/md0

----- Original Message ----- From: "Ivan Voras" <ivoras@freebsd.org> >> The machine is running with ULE on 7.0 as mention using an Areca 1220 >> controller over 8 disks in RAID 6 + Hotspare. > > I'd suggest you first try to reproduce the stall without ULE, while > keeping all other parameters exactly the same. Ok tried with an updated 7 world / kernel as

Hi, I'm experiencing recently happend kernel panics while making bacula backups on my external USB harddisk. It first happened some days ago while I was running 6.4-PRERLEASE. I then updated to 6.4-STABLE and enabled all the kernel debugging stuff. I've uploaded "screenshots" (including backtrace) here: http://pics.pofo.de/gallery/v/misc/ I'm now not sure if the external

I have RH 8 running on a Abit BE7-RAID motherboard. My task is installing Centos 4.1 with limited knowledge on installing with hardware RAID. The arrays are still in place for the two pairs of drives. HighPoint only shows drivers up through RH 9. Is there anyone who can take me through the steps? Remove the existing arrays? Will the drivers work with Centos 4.1? Since I used Windows to

Anyone who know if there exist drivers for Highpoints RocketRAID 454 for CentOS? I didn't find any on their site for RedHat Enterprise, which I tought would work with centos, so.. anyone? http://www.highpoint-tech.com/USA/bios_rr454.htm /H?vard

So I have a system running: FreeBSD walk.dclg.ca 9.2-RC3 FreeBSD 9.2-RC3 # r254952: Wed Aug 28 03:02:55 EDT 2013 root at walk.dclg.ca:/usr/obj/usr/src/sys/STRIKE i386 and it has two 2T SATA disks. To keep this post short, the crash.txt is here. https://uk.eicat.ca/owncloud/public.php?service=files&t=fea9d25579fe0c4afb808859e80e1493 now curiously, while running a "make -j4

I''m struggling to get Xen to boot on a FC4 Opteron box. I''ve included the tail of the boot log below [1]. I suspect that the problems relates to the software RAID 1 root and boot partitions, and how it relates to the initrd image. The RAID volumes fail to mount. I compiled the Xen snapshot from the 23rd September, and the only change I''ve made is to enable the

Hello, I know that this card has support in FreeBSD but I'm curious if anyone has used them under heavy load in a RAID-5 configuration. We're thinking of equipping two of these cards with 8 120GB Hitachi drives and run it in an RAID-5 array for video material. The usual data streams will likely be 2-3 streams at about 5-20MB/s (totally) and I know that a single drive will handle that,

I got a Dell T110-II server on 2013-July-19. It has two 1Tbyte drives that the PERC H200 controls, RAID 1. I tried to install FreeBSD-9.1-RELEASE from a DVD from FreebsdMall. The autopart segfaulted, evidently because it could not find any disks. I think there is a PR about the segfaulting (bad bug, no messages). I worked around the problem by going to the loader prompt when the initial

Has anyone on the list used one of these w/Linux? We currently use Linux + Cinelerra for editing uncompressed video (and a few dual G5 macs running Final Cut Pro). Current editing stations are getting a bit long in the tooth so I've been mulling over a mass upgrade. 8-) These cards are interesting to me because they are PCI-X and support 4 SATAII drives per multilane/infiniband

Hi all, Would anybody care to suggest a third party SATA-RAID card that works out of the box with CentOS 6, without having to jump through hoops to make it work? The card should preferably be able to connect ten harddrives, but I guess three four-port cards should work as well. There's no need for anything fancy really, as long as I can create a single big software-raid on it at CentOS

On 8/5/2015 11:27 AM, m.roth at 5-cent.us wrote: > Bowie Bailey wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. I was able >> to partition and sync the raid devices, but I cannot get the new drive >> to boot. >> >> This is an old system with only IDE ports. There is an added Highpoint >> raid card which is used only for the two extra