similar to: em watchdog timeout on UP, 6-stable

Hello! [Cc to stable@, for wider audience] The plan is two axe two old networking protocols from FreeBSD head/, meaning that FreeBSD 11.0-RELEASE, available in couple of years would be shipped without them. 1) AppleTalk Last time claimed to be supported by vendor in 2007[1]. In practice had very little use since 90th. Discontinued by major routing equipment vendors since 2009[2].

HI, i have updatete to 6.1-PRERELEASE and after the "installworld" step GRUB is unable to boot FreeBSD. After i did the installworld and rebooted the GRUB error was: 23 : Error while parsing number I have reinstalled the standard FreeBSD loader for now. Booting with a GRUB boot-floppy i am able to start either XP or Linux but trying to start FreeBSD the system just reboots, no

Hello list! When em0 has an inet address while bridge0 doesn't, it seems to be OK: ----- bs1% uname -a FreeBSD bs1.sp34.ru 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun May 25 20:15:26 MSD 2008 root@bs1.sp34.ru:/usr/obj/usr/src/sys/BSM i386 bs1% ifconfig em0; ifconfig tap0; ifconfig bridge0 em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500

Hi, I have a server at Hetzner and something strange happend. First, I installed FreeBSD 10.0-BETA3 (amd64) via their FreeBSD 9.2-RELEASE rescue system, that's ok. I had to configure the network by using the em driver -> em0 interface. But suddenly, the network was lost. After an ACPI reboot, nothing. Going to the vKVM show me the system didn't detected em0 anymore but an nVidia

Hi All, on fresh installation of 10.0-BETA3 it is unable to access files on Samba share: # mount [...] //USER at HOSTING/DTEL-IX on /mnt/fs/dtel-ix (smbfs) # cp /mnt/fs/dtel-ix/port_distribution.xls ./ cp: ./port_distribution.xls: Bad address At the same time I get kernel messages: smbfs_getpages: error 60 vm_fault: pager read error, pid 927 (cp) Please advice, thanks. -- MINO-RIPE

Hello, while checking new mtu9k-setup, I discovered that ping has some odd behaviour. If I use payloadsize > 4067, every 2nd icmp-echo-request seems to be malformed: ping -s 4068 -D 10.5.49.65 1st: 12:21:09.048447 IP 10.5.49.126 > 10.5.49.65: ICMP echo request, id 46597, seq 0, length 4076 0x0000: 4500 1000 0f2d 4000 4001 a507 0a05 317e 2nd: 12:21:10.052891 IP 10.5.49.126 >

I am trying to determine whether two samples are identical or not. I'm aware that somebody can use the Kolmogorov-Smirnoff test to compare empirical distributions, but since my samples have ties I'm not sure if I'm getting the right p-values for the comparison. Can the Kolmogorov-Smirnoff test be adjusted for the case when ties exists and are there any functions that already

Hi, just got an Epson Perfection 1260 scanner which is supported according to sane, but decides not to scan, even though the lamp is switched on and the stepper motor makes one step, if scanimage is started. sane-find-scanner says: found USB scanner (vendor=0x04b8, product=0x011d) at /dev/uscanner0 scanimage -L says: device `plustek:/dev/uscanner0' is a Epson Perfection 1260/Photo USB

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Hello Everyone, I am relatively new to linux and Samba and I am having some difficulties setting Samba up as a Primary Domain Controller. Ihave read the Pdf document called "Using Samba as a PDC" by developrWorks and I have read most of the Howto documents relating to Samba. When I try to connect to my samba server with Win98se I get the message "no Domain server was able to

R-Helpers, I'm sorry to have to ask this -- I've not used R very much in the last 8 or 10 months, and I've gotten rusty. I have the following (ff2 is a subset of a much, much larger dataset): > ff2 hostName user sys idle obsTime 10142 fred 0.4 0.5 98.0 2007-11-01 02:02:18 16886 barney 0.5 0.2 94.6 2007-10-25 19:12:12 8795 fred 0.0 0.1 99.8

Hi all, I moved from 8.0-RELEASE to last week's -STABLE: $ uname -v FreeBSD 8.1-STABLE #0: Thu Sep 2 16:38:02 SAST 2010 root@XXXXX:/usr/obj/usr/src/sys/GENERIC and all seems well except my network card is unusable. On boot up: em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3040-0x305f mem 0xe3200000-0xe321ffff,0xe3220000-0xe3220fff irq 10 at device 25.0 on pci0 em0: Setup

Hi. I''ve installed ruby, gems, rails into a user directory according to the installation instructions (for linux). I haven''t setup any path information nor setup any symlinks or any compilation options. When I try rails, I find that the system accesses controllers but that the corresponding views are not displayed. I wonder if there is something that I forgot to configure

Hallo, I have got an existing data frame and want to add a new column. The existing data frame was created like this: > df <- rbind( c("Fred", "Mary", 4), c("Fred", "Mary", 7), + c("Fred", "Mary", 9), c("Barney", "Liz", 3), + c("Barney", "Liz", 5) ) > df

Hi, I'd like to build a toolkit CD specifically for conducting forensics on FreeBSD. I'm not talking about a bootable CD but rather one that I could pop into a CD ROM drive and run trusted commands like ps, netstat, ls, etc., from. I'd like to build a CD that would work on -RELEASE versions of FreeBSD like 5.1 and -STABLE versions of FreeBSD too. Can anyone give me any pointers

Hi, I'd like to build a toolkit CD specifically for conducting forensics on FreeBSD. I'm not talking about a bootable CD but rather one that I could pop into a CD ROM drive and run trusted commands like ps, netstat, ls, etc., from. I'd like to build a CD that would work on -RELEASE versions of FreeBSD like 5.1 and -STABLE versions of FreeBSD too. Can anyone give me any pointers

Hallo, I build a list by the following way: Lst = list(name="Fred", wife="Mary", no.children=3, cild.ages=c(4,7,9)) I know how I can extract the information one by one. But now I want to add a new entry which looks like name="Barney", wife="Liz", no.children=2, cild.ages=c(3,5) How can I add this information to Lst without overwriting the first entry?

Hi - this is my first day with Ruby on Rails. I''m starting out by working through the Helloworld (Hello Ruby) example program printed up in "Agile Web Development with Rails." My steps are as in the text: 1. ruby script/generate controller Say 2. edit the proper file and add the hello method 3. fire up the browser using address http://localhost:3000 4. fire up the

Dear best guys, I really love 5.3 in many ways but here're some unbelievable transfer rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve my performance problem (*laugh*): (In short, see *** below) Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI Desktop adapter MT) connected directly without a switch/hub and "device

https://bugs.freedesktop.org/show_bug.cgi?id=87715 Bug ID: 87715 Summary: Changing resolution away from 1680x1050 results in scattered display Product: Mesa Version: 10.4 Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium