similar to: 4.9 RC1 (i386) mplayer induced panic

This morning, I upgraded my main system to an up-to-date -STABLE including acpi and it now hangs during shutdown after reporting: Waiting (max 60 seconds) for system process `vnlru' to stop...stopped If I set hw.acpi.disable_on_poweroff=0 then the shutdown completes but poweroff fails with (hand copied): ACPI-1287: ***Error: Method execution failed [\_PTS] (Node 0xc21ed450),

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Just trying to understand if anything might be going on with this crash dump or just faulty hardware ? dmesg at the end ---Mike # gdb -k /kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type

After some dialog with Terry Lambert on -hackers, I've been advised to post this here. I have a 4.7-RELEASE-p10 box that is suffering regular kernel panics. The machine is a Dell 2650 running primarily as a file/print server to a number of computer labs of about 400 machines (although it also functions as a rembo image server and squid proxy). It mainly stores applications, which

Dear collagues, could someone sched me a light about the following crash (I'm almost sure about hardware, temperature, etc...) Machine is fairly stable; however, there are occational crashes, similar to this one; backtraces are almost always single-step. It's 4.8-R, dmesg and gdb -k output follows ====================================================================================

Hi, I had 6 crash in 3 hours with exactly the same messages is my aac controler dead ? aac0: COMMAND 0xc4c9d900 TIMEOUT AFTER 512 SECONDS aac0: WARNING! Controller is no longer running! code= 0x100 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 01 fault virtual address = 0x5a fault code = supervisor read, page not present instruction pointer =

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

[ Asked on -questions on Friday; re-asking now on -stable without cross-post] I recently upgraded a 4.11-REL machine to 6.0-REL and have run into some snags. While the installation from CD went fine, after configuring and enabling my ed0 NIC, bad things start to happen. FWIW, this machine is an ancient (hardware circa 1991, BIOS circa 1994) dual-Pentium 133 MHz machine, with EISA/PCI and

Did cvsup on a machine that does just mail processing (well, a lot of spam scanning) and it crashed not too much later. This kernel does not include MFC src/sys/kern/sys_process.c revisions 1.111 and 1.112: Use kmem_alloc_nofault() rather than kmem_alloc_pageable() in procfs_rwmem(). Use vm_page_hold() in place of vm_page_wire() since the page can be freed. Don't hold extra

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Hi, After kernel panic I couldn't get gdb work properly. msi$ uname -sr FreeBSD 4.7-RELEASE msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show

After updating my kernel from a 4.7-stable to 4.8-stable update, my SB PCI128 is no longer recognized by the pcm driver. Here is my dmesg: FreeBSD 4.8-STABLE #0: Thu Jul 17 14:13:52 CDT 2003 root@hautlos.stout.osu-res.okstate.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) Origin =

Hello, This file server was upgraded from 6.2-RELEASE-p$something to 6.3-RELEASE-p3 (current RELENG_6_3 sources via csup) on August, 11 and rebooted to the new kernel on August, 12. The school is closed due to holidays. The only load is mail delivery to Maildirs via NFS from another server (just 50 mailboxes or so, none of them very busy) and nightly backups. I went there on August, 13 to perform

Well, 4 days after previous upgrade i cvs'ed RELENG_4 from local cvs tree (updated hourly), made buildworld buildkernel installkernel, rebooted into single user, made installworld and mergemaster. Mergemaster updated newsyslog.conf, syslogd.conf, ok, rebooted... Wow... All scripts from /usr/local/etc/rc.d refused to load. And the system is in "Amnesiac" mode Attempt to run

Hi, hackers : Yesterday night and this morning, I cvsup my system to latest STABLE branch source (RELENG_4). All make buildworld, buildkernel, and installkernel procedure was completed with no error. But when I boot into single user mode and try to make installworld, I always got " touch: not found " error. Does anyone encounter this situation ? I have no idea about that. :-( Here is

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

Some more crashes of 4.8-RELEASE. Lets see what do I have today: # ls -l /var/crash total 1576676 -rw-r--r-- 1 root wheel 2 Jul 30 13:31 bounds -rw-r--r-- 1 root wheel 2193252 Jun 25 17:30 kernel.0 -rw-r--r-- 1 root wheel 2193252 Jul 4 00:08 kernel.1 -rw-r--r-- 1 root wheel 2193252 Jul 15 19:28 kernel.2 -rw-r--r-- 1 root wheel 2193252 Jul 16 17:50 kernel.3

I have same problem on same class machine, here is dmesg from failing boot (via serial console): -------------------- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE-p7 #0: Sat Sep 20 17:07:38 EEST 2003

Getting the following panic on a new Dell Poweredge 1650. This machine is going to be a VPN server and has a large number of pptp links configured. The machine is stable if mpd is not running. (kgdb) where #0 dumpsys () at /usr/src/sys/kern/kern_shutdown.c:487 #1 0xc0229a0f in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:316 #2 0xc0229e4d in panic (fmt=0xc042876c "%s") at