similar to: HighPoint RocketRaid 454

Anyone who know if there exist drivers for Highpoints RocketRAID 454 for CentOS? I didn't find any on their site for RedHat Enterprise, which I tought would work with centos, so.. anyone? http://www.highpoint-tech.com/USA/bios_rr454.htm /H?vard

Has anyone on the list used one of these w/Linux? We currently use Linux + Cinelerra for editing uncompressed video (and a few dual G5 macs running Final Cut Pro). Current editing stations are getting a bit long in the tooth so I've been mulling over a mass upgrade. 8-) These cards are interesting to me because they are PCI-X and support 4 SATAII drives per multilane/infiniband

m.roth at 5-cent.us wrote: > Bowie Bailey wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. I was able >> to partition and sync the raid devices, but I cannot get the new drive >> to boot. >> >> This is an old system with only IDE ports. There is an added Highpoint >> raid card which is used only for the two extra IDE ports. I have

I'm trying to build driver for hpt374 raid controler on a new installation of contOS 4.2 followin the instroctions in this thread http://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&order=DESC&topic_id=223&forum=7 It says that I should run "yum install kernel-sourcecode" to get the files I need and it will create the path /usr/src/linux-2.6.9-5.0.3.EL which

We're doing a "mini-RC3" to encourage testing of the Highpoint driver (hptrr) backout. Testing of 7.0-RC2 showed there were problems with the driver update done between RC1 and RC2. Because it's a "mini-RC" targetted at testing of one particular thing we have not bothered with setting up FreeBSD Update. You can use the normal cvsup-and-build method of doing an update

I am trying to upgrade my system from 500GB drives to 1TB. I was able to partition and sync the raid devices, but I cannot get the new drive to boot. This is an old system with only IDE ports. There is an added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system

On 8/5/2015 11:27 AM, m.roth at 5-cent.us wrote: > Bowie Bailey wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. I was able >> to partition and sync the raid devices, but I cannot get the new drive >> to boot. >> >> This is an old system with only IDE ports. There is an added Highpoint >> raid card which is used only for the two extra

Hi all, Would anybody care to suggest a third party SATA-RAID card that works out of the box with CentOS 6, without having to jump through hoops to make it work? The card should preferably be able to connect ten harddrives, but I guess three four-port cards should work as well. There's no need for anything fancy really, as long as I can create a single big software-raid on it at CentOS

Anyone know of any PCI-e hardware RAID adapters? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct

Bowie Bailey wrote: > I am trying to upgrade my system from 500GB drives to 1TB. I was able > to partition and sync the raid devices, but I cannot get the new drive > to boot. > > This is an old system with only IDE ports. There is an added Highpoint > raid card which is used only for the two extra IDE ports. I have > upgraded it with a 1TB SATA drive and an IDE-SATA

Guys, I was thrown a cheap OEM-server with a 120 GB SSD and 10 x 4 TB SATA-disks for the data-backup to build a backup server. It's built around an Asus Z87-A that seems to have problems with anything Linux unfortunately. Anyway, BackupPC is my preferred backup-solution, so I went ahead to install another favourite, CentOS 6.4 - and failed. The raid controller is a Highpoint RocketRAID

hello, i''ve much troubles with xen4 and my raidcontroller rocketraid2320 from highpoint. after i installed the latest kernel 2.6.33.3-pv_ops un ubuntu-lucid 64bit from jeremy''s git, i installed the driver from highpoint''s homepage v1.10. the driver was installed normal. ok, reboot and the driver works. modinfo rr232x:

oops. I successfully installed RedHat 8.0 onto two ATA133 80gig drives running a mirrored RAID with the hpt37x (highpoint 372 onboard RaidController on the SOYO DRAGON motherboard.) I used ext3 as my filesystem type of choice but unfortunately the system shut down uncleanly and it now is coming up with the "press Y to force file system integrity check" at boot.... which it runs by

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hey all, well, first of all (even if it's quite late as it's in version 3.0.7 already): thanks a lot to all who are developing and supporting Samba! I'm new to Linux and I really like the way things are happening on this OS. But now, I've reached a point where I have to raise the white flag... It seems to me like - at least my - software raid can't dance Samba. I've got

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

If anyone's got old RocketRAID cards, I just had to deal with one. They are years behind in updating their drivers - googling, I find the last time some were supported was CentOS 5.2. At any rate, I have just managed to build 1.8 of rr232x successfully, and am building filesystems on the drive as I type. I d/l the compressed tarballs from HighPoint's site. The changes to make it compile

I've been trying to get a problem fixed with a Highpoint 1820a crashing out with errors like: kernel: IAL: COMPLETION ERROR, adapter 0, channel 2, flags=104 kernel: ATA regs: error 10, sector count 20, LBA low ff, LBA mid ff, LBA high ff, device 4f, status 51 which results in the disk being dropped from the array. A sharp eyed engineer at Highpoint has just spotted the fact that the read

It appears that CentOS is having problems with my hard disks, which I have off of an HPT 374 Raid controller but with no Raid stripes created, ie. I am just using it as an IDE controller. There is the latest Linux open source for the HPT 374 on Highpoint's web site, which I have downladed. While I understand 'make' and am a programmer myself, I understand nothing about the Linux

I can't install freebsd 6.0 STABLE amd64 on my notebook: HP Pavilion 2420la AMD Turion ML 32 , 1024 RAM, 80 GB HD, ATI Radeon XPRESS 200M. I try all modes , default, whitout acpi, safe mode. In all the cases after the next message the installation doesn't work: timecounters tick every 1000 msec Linux ELF exec handler install lo0.bpf attached I installed linux with parameter noapic