similar to: Boot from CF stalls when mounting root

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

Hi all, Trying to upgrade a system from 9.0-RELEASE to 9.1-PRE from yesterday on my machine (GEOM+ZFS mirror setup on ada[01]p3), the new kernel becomes unable to mount root... The only way to recover is to boot from 9.0 kernel. The disks were already named ada[01] in 9.0, so I suspect nothing there... I tried - disabling AHCI in bios (no change seen) - change cables, check PSU, test disks

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from

Hi, We're having some trouble with detection of a couple of Sil3124 SATA controller cards on newer motherboard and processor combos. Specifically, we're running a Supermicro X9SCM-F motherboard (latest BIOS) and Intel E3-1220v2 CPU. What we're seeing: - Syba Sil3124 PCIe cards are only being detected when installed in PCIe Slot 4 -- The motherboard documentation shows that this

hi folks: xorg caused my macbook 10,1 reboot immediately while startup X with latested nvidia-driver and event not to generate Xorg.0.log file attached my verbose message. thanks for any ideas --wsk -------------- next part -------------- Sep 20 15:40:31 rmbp syslogd: kernel boot file is /boot/kernel/kernel Sep 20 15:40:31 rmbp kernel: 2 Sep 20 15:40:31 rmbp kernel: MADT: Interrupt override:

Well this is new. I haven't a clue what Dell has done on this R620, but this popped up today after I did a boat load of BIOS updates and tried to install stable/9 from our yahoo tree. If anyone sees the obvious solution here, I'd love to figure it out. found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=2, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

Hi, We have a pretty serious problem with our news server crashing during the expire cronjob. This happened with 4.7-RELEASE, so we upgraded to 4.8-RELEASE recently, hoping that the problem might be fixed, but it isn't. The machine is a Compaq DL360-G2. I've searched the PR database as well as the mailing list archives for the panic string, but didn't find anything. What makes the

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

In include/sys/pci.h we have #define MAX_PCI_BUSES 255 and struct pci_bus_list { struct pci_bus pci_bus[MAX_PCI_BUSES]; uint8_t count; }; And in lib/pci/scan.c for (bus = 0; bus <= MAX_PCI_BUSES; bus++) { pci_bus_list->pci_bus[bus].pci_device_count = 0; Fix possible overflows and introduce MAX_PCI_FUNC. - Sebastian Index: syslinux-20080611/com32/lib/pci/scan.c

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

All: I cvsup'ed earlier this evening and am still able to reproduce this panic at will. Command line, panic backtrace, dmesg, ldd output, and mplayer version follow. If more information is needed, just let me know. % mplayer foo.mov [a quicktime file] [plays for awhile, and then panics] # gdb -k -s /usr/obj/usr/src/sys/LICHEN/kernel.debug -e /var/crash/kernel.2 -c /var/crash/vmcore.2

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

This morning, I upgraded my main system to an up-to-date -STABLE including acpi and it now hangs during shutdown after reporting: Waiting (max 60 seconds) for system process `vnlru' to stop...stopped If I set hw.acpi.disable_on_poweroff=0 then the shutdown completes but poweroff fails with (hand copied): ACPI-1287: ***Error: Method execution failed [\_PTS] (Node 0xc21ed450),

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

Dear collagues, could someone sched me a light about the following crash (I'm almost sure about hardware, temperature, etc...) Machine is fairly stable; however, there are occational crashes, similar to this one; backtraces are almost always single-step. It's 4.8-R, dmesg and gdb -k output follows ====================================================================================

With FreeBSD 4.8-20030731-STABLE #0, dmesg messages indicate: module_register: module miibus/ukphy already exists! linker_file_sysinit "miibus.ko" failed to register! 17 module_register: module pccard/ed already exists! linker_file_sysinit "if_ed.ko" failed to register! 17 This doesn't look dangerous but the rl0 ethernet card just stopped recieving packets suddenly and

Sorry if this is a known problem... I've been tracking RELENG_4 on my Toshiba laptop for a while now; a couple of months ago (not sure when) my sound stopped working. More specifically, when it gets to the pcm probe, the boot hangs. I dual-boot with WinXP and figured that somehow XP had hosed the hardware, so I wrote it off. Today, I made world with RELENG_4_8, and voila, my sound's

On Thu, Feb 07, 2013 at 09:53:39PM +1100, Vadim Rozenfeld wrote: > On Thu, 2013-02-07 at 12:18 +0200, Michael S. Tsirkin wrote: > > On Thu, Feb 07, 2013 at 08:24:10PM +1100, Vadim Rozenfeld wrote: > > > On Thu, 2013-02-07 at 11:33 +1030, Rusty Russell wrote: > > > > Vadim Rozenfeld <vrozenfe at redhat.com> writes: > > > > > On Tue, 2013-02-05 at