similar to: 5.1-R-p2 crashes on SMP with AMI RAID and Intel 1000/Pro

After some dialog with Terry Lambert on -hackers, I've been advised to post this here. I have a 4.7-RELEASE-p10 box that is suffering regular kernel panics. The machine is a Dell 2650 running primarily as a file/print server to a number of computer labs of about 400 machines (although it also functions as a rembo image server and squid proxy). It mainly stores applications, which

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

Greetings I'm trying to install FreeBSD on a HP Cluster Server. But when I boot with the CD's ( 4.4, 4.8 & 5.0 ), it will boot all the way upto "Wait 15 seconds for SCSI devices to settle" and then it immedialty give the following message: (noperiph:sym0:0:-1:-1):SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1):SCSI BUS reset delivered. After this the machine is

i trust i am still new in freebsd, after go through all mail and book, = now seem to be more close, i got 3 server and a notebook to play with, = install no problem. cvsup not problem.make buildworld not problem. make = build kernel become,every machine i got different error code 1,=20 1-one got system full=20 2-one showing this sometime=20 > anyone know the best way to be one time success,not

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Hi, I had 6 crash in 3 hours with exactly the same messages is my aac controler dead ? aac0: COMMAND 0xc4c9d900 TIMEOUT AFTER 512 SECONDS aac0: WARNING! Controller is no longer running! code= 0x100 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 01 fault virtual address = 0x5a fault code = supervisor read, page not present instruction pointer =

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

Hi, I have been having a fairly serious problem with an HP Netserver LH3 that seems to hang for no apparent reason. This happens when the machine is under load and it also happens when it is simply idle. When this "hang" occurs I can no longer SSH to the box. I can ping it and port scan it and it appears to be "alive" but it won't load web pages or process mail

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

Just trying to understand if anything might be going on with this crash dump or just faulty hardware ? dmesg at the end ---Mike # gdb -k /kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type

Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor for the purposes of testing it to see if FreeBSD and these machines will make a good replacements for our current flock of 11 Netra T1s running solaris. Things are going very well with the tests, with the glaring exception of the following crash: While doing some significant disk operations: du, deleting a different part of the

FreeBSD 4.1.1-RELEASE #1: Tue Oct 10 18:09:51 CDT 2000 root@test-drive.tamu.edu:/usr/src/sys/compile/TEST-DRIVE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from

On Sat, Nov 21, 2015 at 9:28 AM, Rui Ueyama <ruiu at google.com> wrote: > On Fri, Nov 20, 2015 at 10:13 PM, Simon Atanasyan <simon at atanasyan.com> > wrote: >> >> In case of MIPS O32 ABI we have to find a matching R_MIPS_LO16 >> relocation to calculate R_MIPS_HI16 one because R_MIPS_HI16 uses >> combined addend (AHI << 16) + (short)ALO where AHI is

(Adding just a bit to Jake's response) On Tue, Mar 26, 2019 at 11:31 AM Jake Ehrlich via llvm-dev < llvm-dev at lists.llvm.org> wrote: > Hi Seiya, > > What should I prioritize? I suppose that improving llvm-objcopy is the >> most crucial work in this summer. > > > This is an opinion that will vary a lot from person to person. > +1! And don't forget that