similar to: NEC 1300A DVD-R writing

I accidentaly re-ripped some of my CDs and did take this as a chance to do some comparison. Here is what I have found for on of the songs. Peak level 100.0% Track quality 100.0% Copy CRC C8F5065F Track not present in database Used drive : _NEC DVD_RW ND-3500AG Adapter: 0 ID: 1 Read mode : Secure with NO C2, accurate stream, disable cache Combined read/write offset correction

I have an NEC DVD-RW ND2500A (that's not the label I bought it under, but that's what it really is.) It's supposed to read/write CDs, DVDs, DVD+Rs, and DVD-Rs. I'm basically dual booting between XP and CentOS 4. Following the recipe in "The Linux Cookbook", I tried to copy a DVD using: dd if=/dev/hdd of=/tmp/diskfile.iso then cdrecord dev=/dev/hdd fs=32m

I just finished up a port of Andy Polyakov's excellent dvd+rw-tools to FreeBSD, and he has incorporated the patches into his release: http://fy.chalmers.se/~appro/ http://fy.chalmers.se/~appro/linux/DVD+RW/ http://fy.chalmers.se/~appro/linux/DVD+RW/tools/ (version 5.8.4.4.4) These tools support DVD-R, DVD-RW, DVD+R, and DVD+RW format dvd burners, including the popular Sony

Hi there. I am unsuccessfully trying to write a data DVD on FreeBSD 4.8. The writer is a Sony DVD RW DRU-500A on IDE. I'm using the atapicam driver. The media is a Sony DVD+RW which arrived with the writer. Both with cdrecord ProDVD (from the ports or otherwise) and dvdrtools I get a general SCSI retryable error message, when trying to write a data track or blank a DVD. I have no

Hi I have been trying to get Xen running under Ubuntu. Status ------ I can get Ubuntu to boot on the patched 2.6.10 kernel however :- a) I get several boot errors thus :- Linux version 2.6.11.10-xen0 (root@gateway) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu Jun 9 19:58:00 BST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000927c000 (usable) 146MB LOWMEM

I am currently attempting to get Asterisk working with our existing NEC IPK 192 system. The * box has a Wildcard X100P clone card in it and is hooked to an analog port on the NEC system. The analog port is shared between an elevator phone and a credit card machine. I have one SIP extension configured in * which the softphone on my Windows PC is registered to. With the softphone I am able to

Is there anyone out there who has tried to connect up an asterisk box to make and take calls through a NEC NEAX 2400 using Q.sig or anything like it? Can anyone tell me if it is possible? Thanks in advance, Phil Allred Brooklyn Law School

Hi All: We have cooperation PBX as NEC, I am wondering how to replace our legacy ACD by using Asterisk, but not losing tie line connection to NEC. Does anyone have any idea how to make it work? Many thanks, Tilein

http://bugzilla.mindrot.org/show_bug.cgi?id=465 djm at mindrot.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED ------- Additional Comments From djm at mindrot.org 2003-02-24 15:46

I have an nec electra elite 192 with a t1 card; and am looking for suggestions as to integrating them (can't throw out the system yet!). I have a fully working asterisk server -CVS-04/27/04-19:01:05- (found a hp d220 for $350.00!), 2 digium t100p cards, a plain t1 with loopstart signaling, and 2 working bt102 grandstream ip phones (thanks again Matt for your "start from scratch"

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming

Hi, How can I make calls from Asterisk client to NEC NEAX 2400 traditional phone ? Is it possible to have a connection between Asterisk and NEC NEAX 2400, since NEC-NEAX2400 is an IP-PBX and supports SIP. Please help me to find a solution ;;; Thanks & Regards Ram Kumar Customer Support Engineer Barcode Gulf LLC Dubai , UAE Mobile : + 971 50 5594178 Email : Ramkumar@barcodegulf.net

I'm using QSIG between an NEC SV8300 and Asterisk (after giving up with CCIS). Things work pretty well with the exception of issues on stations on the SV8300. When I call from Asterisk to a SV8300 station and I send my extension as the caller ID number, it shows up on the SV8300 as "OPERATOR". I've tried a few different TON/NPI values with no difference. If I set callerid to a

Hi, We are currently in the process of installing an Asterisk box between our legacy PBX (NEC Xen Master) and the Telco (Telstra). Originally the PBX was connected to the telco via 8x BRIs. Our new Asterisk box has been setup with 2 OpenVox B800P cards. Each card has the 4 ports in TE mode and 4 ports in NT mode. The NEC PBX is connected to the Asterisk boxes NT ports and the Asterisk box is

I am trying to setup an extension in asterisk which dials an extension on the NEC DSX. i.e. If an asterisk user dials 402 I want it to connect to the NEC DSX @ 192.168.1.57 and connect to extension 402. ( 404 would be the NEC DSX sip account that I have the credentials for ). [402] deny=0.0.0.0/0.0.0.0 secret=pass1 dtmfmode=rfc2833 canreinvite=no context=from-internal host=dynamic type=friend

hi * users, anyone out there ever come across, worked with or heard anything about NEC's Univerge SV7000 Telephony Server? Link is at http://www.univerge.nec.com/products/list/sv7000/sv7000.html I'm just wondering whether it's as flexible, programmable and configurable as Asterisk. It also looks like they've got a whole range of IP phones

I have done additional testing and I haven't been able to figure out why it's failing. Since my original testing we now set the realm on the authentication section to match what we receive from NEC. It's of the format abc at xyz.com I have verified the md5_cred several times and it matches the user:realm:password formula 3016:insiph at something0a646666.com:3016 where username is

Hello, we’d like to propose the integration of a new backend into LLVM: NEC SX-Aurora TSUBASA Vector Engine (VE). We hope to get some feedback here and at EuroLLVM about the path and proper procedure of merging. The SX-Aurora VE is a Vector CPU on an PCI-E Accelerator card. It has 48GB memory from six HBM2 stacks, accessible with 1.2TB/s bandwidth, 8 cores with vector and scalar units, each.

hi my script to backup my home folder BDIR=/home/$USER EXCLUDE=exclude.txt OPTS="-a -r -v -p -t --del --exclude-from=$EXCLUDE --progress" BACKUPDIR=/media/dvdrecorder rsync $OPTS $BDIR $BACKUPDIR my exclude file + .kde/ + .kde/share/ + .kde/share/apps/ + .kde/share/apps/kmail/*** + .kde/share/apps/kwallet/*** + .kde/share/apps/konqueror/*** + .kde/share/apps/kabc/*** - .** when i

Hi! I'm working on a rewrite of the winaspi module, using Joerg Schilling's libscg. (libscg is a scsi transport library, with support of many platforms, cdrecord, cdrdao uses it). I'm nearly finished, but I could test only winaspi32 (with nero and isobuster), I need a software that uses the 16 bit aspi interface to test it. Anyone knows such a software that uses wnaspi.dll?