similar to: hints on KVM switches w/ X

After some poking into psm.c code I've got some results. First, for the archives, debug.psm.loglevel tunable is much more useful than a verbose boot for debugging PS/2 mouse issues. A good value is 2. Second, I fiddled with various probe methods to force them to "recognize" my mouse (by loosening their checks) and found out that the mouse works perfectly if it is treated as

Hi, I've recently installed FreeBSD 6.3, and I've got a problem with synaptics. I've installed it, followed the pkg-message : hw.psm.synaptics_support=1 It works, dmesg gives : psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 moused_enable="NO" ps shows me that moused doesn't run. xorg.conf : InputDevice

I need to get a wireless device for an upcoming trip (USB is preferable to PCMCIA for a long list of reasons) and I'm wondering if anyone has any experience with or recommendations for such items, particularly which ones work with Linux/CentOS. Right now I'm debating between a reasonably cheap Belkin 54G and a slightly more expensive Netgear 54G. Thanks. mhr

Does anyone here use a multi-button (as in more than 2) mouse with Linux? How well supported are they? I've had to get one recently for work. I was diagnosed with CTS and I now wear braces and use a wireless Intellimouse. Works great at work with Windows, but I'm unsure how much, if any support there is for Linux. Anyone have experience with this? Preston

I needed to upgrade to R 2.4.1 from debian stable maintained at http://cran.r-project.org/bin/linux/debian/. and tried to upgrade with apt-get install r-base. It installed R 2.4.1 successfully, but ran into errors while also upgrading r-recommended packages. I was able to fix that using apt-get install -f euclid:~# aptitude install r-base Reading Package Lists... Done Building Dependency

Hi Matt, Run these commands on all the bricks of the replica pair to get the attrs set on the backend. On the bricks of first replica set: getfattr -d -e hex -m . <brick path>/.glusterfs/10/86/ 108694db-c039-4b7c-bd3d-ad6a15d811a2 On the fourth replica set: getfattr -d -e hex -m . <brick path>/.glusterfs/ e0/c5/e0c56bf7-8bfe-46ca-bde1-e46b92d33df3 Also run the "gluster volume

Hi Matt, The files might be in split brain. Could you please send the outputs of these? gluster volume info <volname> gluster volume heal <volname> info And also the getfattr output of the files which are in the heal info output from all the bricks of that replica pair. getfattr -d -e hex -m . <file path on brick> Thanks & Regards Karthik On 16-Oct-2017 8:16 PM,

Attached is the heal log for the volume as well as the shd log. >> Run these commands on all the bricks of the replica pair to get the attrs set on the backend. [root at tpc-cent-glus1-081017 ~]# getfattr -d -e hex -m . /exp/b1/gv0/.glusterfs/10/86/108694db-c039-4b7c-bd3d-ad6a15d811a2 getfattr: Removing leading '/' from absolute path names # file:

Hi all; for few weeks I'm trying to implement a new samba PDC server for my school. It is based on debian squeeze and samba 3.5.6 with lDAP backend. I was able to join a computer into domain, LDAP is working, mapping home drive for users also. It seems that almost all works good but with one exeption. The one thing which is broken is roaming profile support. When user is logging into domain

When writing to a newly created btrfs (vanilla 2.6.33-rc6, sparc64) the following messages are printed: [28617.650231] Kernel unaligned access at TPC[10101f18] btrfs_csum_final+0x38/0x60 [btrfs] [28617.745783] Kernel unaligned access at TPC[10101f18] btrfs_csum_final+0x38/0x60 [btrfs] [28654.589492] Kernel unaligned access at TPC[10101f18] btrfs_csum_final+0x38/0x60 [btrfs] [28654.685036] Kernel

I've been following this particular thread as I have a similar issue (RAID6 array failed out with 3 dead drives at once while a 12 TB load was being copied into one mounted space - what a mess) I have >700K GFID entries that have no path data:Example:getfattr -d -e hex -m . .glusterfs/00/00/0000a5ef-5af7-401b-84b5-ff2a51c10421# file: .glusterfs/00/00/0000a5ef-5af7-401b-84b5-

In my case I was able to delete the hard links in the .glusterfs folders of the bricks and it seems to have done the trick, thanks! From: Karthik Subrahmanya [mailto:ksubrahm at redhat.com] Sent: Monday, October 23, 2017 1:52 AM To: Jim Kinney <jim.kinney at gmail.com>; Matt Waymack <mwaymack at nsgdv.com> Cc: gluster-users <Gluster-users at gluster.org> Subject: Re:

Hi Jim, Can you check whether the same hardlinks are present on both the bricks & both of them have the link count 2? If the link count is 2 then "find <brickpath> -samefile <brickpath/.glusterfs/<first two bits of gfid>/<next 2 bits of gfid>/<full gfid>" should give you the file path. Regards, Karthik On Tue, Oct 24, 2017 at 3:28 AM, Jim Kinney

I'm not so lucky. ALL of mine show 2 links and none have the attr data that supplies the path to the original. I have the inode from stat. Looking now to dig out the path/filename from xfs_db on the specific inodes individually. Is the hash of the filename or <path>/filename and if so relative to where? /, <path from top of brick>, ? On Mon, 2017-10-23 at 18:54 +0000, Matt Waymack

Hey Matt, >From the xattr output, it looks like the files are not present on the arbiter brick & needs healing. But on the parent it does not have the pending markers set for those entries. The workaround for this is you need to do a lookup on the file which needs heal from the mount, so it will create the entry on the arbiter brick and then run the volume heal to do the healing. Follow

OK, so here?s my output of the volume info and the heal info. I have not yet tracked down physical location of these files, any tips to finding them would be appreciated, but I?m definitely just wanting them gone. I forgot to mention earlier that the cluster is running 3.12 and was upgraded from 3.10; these files were likely stuck like this when it was on 3.10. [root at tpc-cent-glus1-081017 ~]#

Hi Jim & Matt, Can you also check for the link count in the stat output of those hardlink entries in the .glusterfs folder on the bricks. If the link count is 1 on all the bricks for those entries, then they are orphaned entries and you can delete those hardlinks. To be on the safer side have a backup before deleting any of the entries. Regards, Karthik On Fri, Oct 20, 2017 at 3:18 AM, Jim

I am using psm to model some parametric survival data, the data is for length of stay in an emergency department. There are several ways a patient's stay in the emergency department can end (discharge, admit, etc..) so I am looking at modeling the effects of several covariates on the various outcomes. Initially I am trying to fit a survival model for each type of outcome using the psm

I have 14,734 GFIDS that are different. All the different ones are only on the brick that was live during the outage and concurrent file copy- in. The brick that was down at that time has no GFIDs that are not also on the up brick. As the bricks are 10TB, the find is going to be a long running process. I'm running several finds at once with gnu parallel but it will still take some time.

Does Surv in psm handle interval2 data? The argument list seems to indicate it does but I get an error. Thanks, Chris # code library('survival') left <- c(1, 3, 5, NA) right <-c(2, 3, NA, 4) Surv(left, right, type='interval2') survreg(Surv(left, right, type='interval2') ~ 1) library('rms') Surv(left, right, type='interval2') # error args(Surv)