similar to: Boot problem HP/Compaq DL360 G3

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

Hey everyone, I've got a weird error since I upgraded to the latest dovecot on my FreeBSD box: root at postfixjail /# doveadm quota recalc -u xxx at xxx.com doveadm(xxx at xxx.com): Error: dict-client: Commit failed: Deinit fish: 'doveadm quota recalc -u xxx@?' terminated by signal SIGSEGV (Address boundary error) root at postfixjail /# dovecot --version 2.2.25 (7be1766) root at

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hello: Does anyone know how to configure any of the Cisco 79XX phones to get custom ringers when using chan_sccp with Asterisk? I've currently got Asterisk's 05-24-04 CVS-HEAD and Zozo's 0.2 release of chan_sccp. I've tried using ringlist.dat, but that appears to only be for the SIP phones... Thanks for any input, Andrew

Hello all, Downloaded, compiled and installed Asterisk CVS-04/15/04-17:54:5. Everything looks fine except I see a pseudo channel in the 'zap show channels'. xxxx*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo default 1 default The result is, I cant use Zap/g1 in extensions, eg this doesnt work anymore: exten =>

Kevin Walsh noted that his SPA-2000 takes time from his local NTP server in a post back on Fri June 25. Q: Where do you tell it to use NTP? I'm a bit confused as to where my SPA-2000 is currently getting its time. I told it GMT-5 in the misc section but it doesn't really tell me where its going for this. Is it just broadcasting looking for ntp? The net of my problem is that it is 1 hour

Hi I have found in http://lists.digium.com/pipermail/asterisk-users/2004-July/056111.html (Hack to make * -> (H323) -> CCM -> IOS GW work) that i need a special version of chan_h323, because of the External RTP problem. Do you know exactly which version is it? Or do i need an unofficial patch? Thanx Andr?s

Hi, On Friday we changed our Telco-Provider (from German Telekom to Mnet) and recieved new Numbers. I changed the extensions in extension conf to match the new numbers. But i always get: Jul 18 12:10:39 WARNING[245776]: pbx.c:1780 ast_pbx_run: Channel 'CAPI[contr1/89064934]/0' sent into invalid extension 's' in context 'default', but no invalid handler I only changed the

I've tried to compile rate-engine 0.5.2 on Fedora Core 1, Redhat 9 and OpenNA Linux 1.0 and all give me an "Error 1" after typing "make" but with no real reason given. Just a few standard/non-critical warning messages, and then suddenly "Error 1" Anybody successfully compile Rate Engine? The least cost routing module for Asterisk? Thanks in advance.

Folks, My question concerns the SIP Notify that is being sent to ... device. You can see it in the following line: Voicemail: 0/0 Shows no Voice mail but I did leave a voice mail at the extension. Any suggestion on what I should look for in my * setup. I am not worried about the 481 coming back for the other side yet. Once I get a handle on the Notify, I'll work on the 481.

Hi, I''ve just attempted several times to install Fedora Linux domU''s on a Fedora 6 [32-bit xen kernel 2.6.20-1.2944], and it keeps crashing at various points when trying to format domU''s virtual disk. I''ve tried allocating 1 vcpu and 2 vcpus, and it still keeps crashing dom0. The machine has a total of two hyperthreaded 3.2ghz Xeon cpus, and 3GB of RAM.

Is it possible to get a few 7960's and asterisk to allow all of the 7960 phones to use one extentsion and can only be used by one person at a time, have it indicate on the other 7960's when one of the others has the line engaged. Basicly so like I can setup a rule when an incoming call comes from IAX to divert to this extension, it will ring the extension (thus all phones), and allow me to

On Thu, 27 Jan 2005, John Steele Scott wrote: > That looks fine to me as well. However, the best solution is something which > Luca suggested a few months ago, which is to use the functions defined in > altivec.h. These are C functions which map directly to Altivec machine > instructions. I am willing to help out, but I don't find the current lpc_asm.s > very easy to follow, and

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel