similar to: Proliant on a 6500

I've included all posts till now. Can I ask anyone with older proliant multi-cpu hardware using the smart2 controllers to get in touch with me? I am curious to know if this works for anyone... -D Quoting Danny Carroll <fbsd@dannysplace.net>: > Still more info... > It does not work on 5_0-RELEASE either. > > -D > ----- Original Message ----- > From: "Danny

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP

Ok, here's what iam trying on,, a compaq proliant 8500 server with 8 xeon 550mhz processors, 6 gig ram,, i just installed centos 4.1 on a proliant 3000 dual 550's and 2 gig ram and went smooth as silk, just got the 8500 and it seems to be in good order, but when i tried (twice) to install centos 4.1 it stalls shortly after a screen of stuff installing and the last two items are something

Hello All. I've just started looking into Xen and have a test environment in place. I'm seeing an annoying problem that I thought worthy of a post. Config: I have 2 x HP DL585 servers each with 4 Dual core Opterons (non-vmx) and 16GB RAM configured as Xen servers. These run CentOS 5.1 with the latest updates applied. These system both attach to an iSCSI target which is an HP DL385

hi guys does anybody here runs on HPE ProLiant? I was hoping you can tell whether HPE support Linux Vendor Firmware Service and you actually get to upgrade ProLiants' BIOS/firmware via fwupdmgr? many thanks, L.

HP doesn't support Fedora on Proliant hw so you can't just install their ILO and get access to hw info like cpu/mb/temperature,powersupply status,fan info aso. I used the link below to get that access, which enabled me to write a small script that sends snmp-traps to hp-ovo. I did spend quite some time myself until I found this link.

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

Hi, Up until now, I've only installed Linux either on "desktop" hardware, meaning one of the desktop PCs in the LAN acted as a server machine for the network, or I rented some dedicated server somewhere in a datacenter. Last week I bought some server hardware, a used HP Proliant ML150. It's the first time I am dealing with this sort of hardware. The hardware was sold

Hi, I have a new server HP proliant DL320 G4, with two 160 GB SATA hdds.. I have installed CentOS 4.5 with mdadm without any problem, but when I disconnect one disk the server does not boot or I received a kernel panic when booting... I have disabled the SATA embeded raid (BIOS) and nothing.. I've also download the driver from HP site HP (Embedded SATA RAID Controller Driver Diskette for Red

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Has anyone successfully deployed CentOS on HP Proliant servers using the Altiris Rapid Deployment (RDP) framework? This works out of the box with RHEL 5.1 but I have not been able to get this to work with CentOS 5.1. If anyone knows of an article on all the details to be able to deploy CentOS to a bare machine Proliant Server, I would appreciate a pointer. I did make the changes to the

I'm having problems with PXELINUX passing through to a "localboot" on a HP Proliant DL385. I'm working with 3.73. If I configure PXELINUX to directly "localboot", everything works. If I configure PXELINUX to use menu.c32 or anything like that, a subsequent localboot fails. I see the expected "PXE ROM exiting" message but the next device doesn't

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

I've been seeing some random Proliant DL380 G4 64bit crashes. Each time, on the console are messages relating tojbd2/cciss and something about a waitfor 120 seconds. Is anybody else seeing anything like this? Oddly, I can't seem to find this in the logs. I guess it can't write when this happens. -- John Hinton 877-777-1407 ext 502 http://www.ew3d.com Comprehensive Online

After yum upgrade, the new CentOS5 kernel [ kernel-2.6.18-92.1.1.el5.i686 ] crashes each time early in boot process on Compaq ProLiant 3000 with dual Pentium3 CPU (600 MHz, CPU0: Intel Pentium III (Katmai) stepping 03, CPU1 the same). I get kernel panic at powernowk8_init+0x05e/0x1c3. The previous kernel [ kernel-2.6.18-53.1.21.el5.i686 ] seems to work fine. I am wondering if anyone has met

I''m looking over a couple of used systems that I can get for less than 150USD. I can''t seem to decide if I should splurge and get a 4x box for 25 dollars more than a 2x at a slightly higher clockspeed. 112952-001-B1-06 Proliant 6500 - 4xPIII Xeon500MHz/1MB, 256MB 100738-003-B1-06 Proliant 5500 - 2xPIIIXeon550MHz/512KB, 256MB Any suggestions? I read that domU''s

hi all, i just inherit a server: Compaq ProLiant ML370 Generation 2 Server with Smart Array 5300 Controller with 6x18.2GB hard drives. i want to install centos 5 on it with hardware raid 1. any idea how? it also has a build-in and add-on ethernet cards. how do i know which one is which to assign ip? thanks. t. hiep

On 01/07/2019 18:38, mark wrote: > lejeczek via CentOS wrote: >> hi guys >> >> does anybody here runs on HPE ProLiant? I was hoping you can tell whether >> HPE support Linux Vendor >> Firmware Service and you actually get to upgrade ProLiants' >> BIOS/firmware via fwupdmgr? >> >> > Dunno 'bout "Linux Vendor Firmware Service",

Hi, I've got a HP 380 G2 which is running RHEL AS 3 Taroon update 1. The current smp kernel 2.4.21-9smp is booting with a HPinitrd image. Mostlikely generated with the HP proliant Service Pack for RHEL 3. Now if I migrate this system to CentOS 3 and a new kernel will be installed ,will that work ? Does the new centOS kernel use the same config as the current RHEL kernel ? Anyone done this