similar to: More on the ATA sense error

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

last night I checked the log messages on the server Dell PE2950 6xSAS 146G I found the smartd running , I did not request such daemon [root at PowerEdge1 pons]# tail -f /var/log/messages Aug 25 08:27:30 PowerEdge1 smartd[8039]: Home page is http://smartmontools.sourceforge.net/ Aug 25 08:27:30 PowerEdge1 smartd[8039]: Opened configuration file /etc/smartd.conf Aug 25 08:27:30 PowerEdge1

My wife's box has a very intermittent problem, when booting from the Maxtor IDE hard drive. This has been going on for about 2 1/2 years.... The box is a Compaq EVO D300v for the Enterprise. When it boots, there is a SMART advisory from the BIOS that says failure is immenient. Occasionally, it will not boot, because the BIOS does not see the hard drive. I replaced the EIDE cable, but the

Hello, I'm running CentOS 4.4 and am getting an error from smartd. This machine has a single ide drive in it /dev/hda and i was getting a bootup error from smartd, so i uncommented the /dev/hda line in /etc/smartd.conf. The error persisted when i tried to restart smartd, i got a service restart failed and the below error. Any suggestions? On another unrelated subject i'm

Hi, I've CentOS5 box with 3ware RAID controller in it. I can't get the tw_cli command line tool to work, and smartd also barks on me. The tw_cli simply doesn't see the controller, no errors logged anywhere. When starting smartd, it is much more verbose. I'm getting a bunch of messages like this: Oct 9 22:15:15 toporko kernel: program smartd is using a deprecated SCSI ioctl,

Hi All, I don't know enough about when errors are *really* errors. So I google a lot to read and learn. I have a few things in my Logwatch that I want to make sure I understand 1. smartd **Unmatched Entries** Problem creating device name scan list Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.

I'm not used to using smartd, but have a new set of systems that don't have any sort of RAID on them, so I enabled smartd (18 systems 4 SATA drives each). Running CentOS 5.4 64-bit .. One of them has emailed me twice(despite it saying it would only email me once) saying it has 1 Offline uncorrectable sectors But when I try to find more information, smartctl seems to think everything is

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Yohoo! I have some issues with the smartd in CentOS5/x64 I edited the /etc/smartd.conf for my needs and restarted the smartd with "service smartd restart". But the start script is overriding my file. I checked it and saw the following lines: ---------------/etc/init.d/smartd------------ case "$1" in start | reload | restart) GEN_CONF="*SMARTD*AUTOGENERATED*" [ !

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

It seems I can't smarm monitor disks on RAID controllers? I tried on several machines with two different controllers and on all I get this when starting up smartd: Jul 27 14:36:43 c1 smartd[5944]: Opened configuration file /etc/smartd.conf Jul 27 14:36:43 c1 smartd[5944]: Configuration file /etc/smartd.conf parsed. Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, opened Jul 27 14:36:43

I had a drive failing on a server. I've replaced it. The old drive was /dev/sdb; the new one's /dev/sdd. The manpage and googling are failing me - anyone know how to tell smartd to stop trying to read /dev/sdb (which I've pulled, and is sitting here on my desk)? I don't need the garbage in the logs, and no, I can't just reboot the server, since it's a home directory

Hello, I'm using HP homeserver where host system run CentOS 6.3 with KVM virtualization with SELinux enabled, guests too run the same OS (but without SELinux, but this does not matter). Host system installed on mirrors based on sda and sdb physical disks. sd{c..f} disks attached to KVM guest (whole disks, not partitions; needed to use zfs (zfsonlinux) benefit features). Problem is that disks

Hi to all! I have a problem with a nvidia geforce 520mx [NVd0 generation card (0x0d9110a1)] i have on my notebook (samsung 3 series). In practice i'm not able to use it with bumblebee and bbswitch. The dmesg message is: [ 13.507435] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 13.507440] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 13.507448] nouveau

I decided, after the last discussion of smartd and S.M.A.R.T. disks, to take a look in my /var/log/messages, and I'm seeing fair bit of this: Sep 10 20:11:23 mhrichter smartd[3361]: Device: /dev/sda, 4294967295 Offline uncorrectable sectors Sep 10 20:41:23 mhrichter smartd[3361]: Device: /dev/hdb, 21 Currently unreadable (pending) sectors Sep 10 20:41:24 mhrichter smartd[3361]: Device:

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

Package: logcheck Version: 1.2.43a Severity: normal -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have messages like these in my logs: Apr 27 10:05:49 localhost smartd[9357]: Device: /dev/hda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 58 to 57 Apr 27 10:05:49 localhost smartd[9357]: Device: /dev/hda, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 58 to 57

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

On Sat, Jan 27, 2007 at 02:40:41PM -0800, Steve Langasek wrote: > On Sat, Jan 27, 2007 at 02:36:00PM +0000, martin f krafft wrote: > > tags 408037 wontfix > > thanks > > > Steve, I am not happy with filtering this message on the basis that > > is *is* an uncorrectable sector and thus a problem that should get > > fixed. > > No, smartd already sends its

Hello, Currently develop a module for the packet smartd. But I''m using the resource file_line, but displays the following message when using the puppet parser: "err: Could not parse for environment production: Syntax error at ''{'', expected ''}'' at / etc / puppet / modules / smartd / Manifests / init.pp: 66 '' I really can not see my