similar to: CentOS-5 Need Help With Serial Ports

On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the

The vm host shows this: # setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 16950/954, Port: 0xd040, IRQ: 17 /dev/ttyS2, UART: 16950/954, Port: 0xd048, IRQ: 17 /dev/ttyS3, UART: 16950/954, Port: 0xd050, IRQ: 17 # # ll /dev/ttyS* crw-rw----. 1 root dialout 4, 64 Nov 10 12:18 /dev/ttyS0 crw-rw----. 1 root dialout 4, 65 Nov 10 12:18 /dev/ttyS1 crw-rw----. 1

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

On Mon, Jan 29, 2018 at 07:00:02AM -0500, Pete Geenhuizen wrote: > > > On 01/28/18 20:15, Fred Smith wrote: > >On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > >>I'm upgrading from CentOS6 to CentOS 7. > >> > >>I run 2 weather stations on C6 and have one of them attached to > >>ttyS0 which is on the motherboard, and the

I just installed CentOS 5.1 on a Dell Vostro 200 (Intel G33) which has a Sunix PCI-Express (x1) 8-port RS-232 card installed. For me it looks like only 4 ports are recognized, but I'm not sure if it's even working with those 4. >From 'dmesg' I see this: ... Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

I hope this is not to far off topic. I have a Windows 2003 guest on a CentOS 5.5 KVM host. I need to use the serial port on the win2003 guest for the application it is serving. I have no idea what needs to be done but it looks like the linux host is trying to use the serial port as the priamary console but I don't really understand what that is or where it is configured. What I need is for

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

I recently purchased a Cyber Power 700 AVR UPS. I installed it just fine and wanted to install NUT to monitor the unit. I searched the mailing list and found a similar post. However, the distro used in that post was different and the unit was slightly different (900 AVR). My server is running Debian Lenny. The Cyber Power UPS is connect to one of the serial ports using the cable that came with

I am in the process of migrating from running CentOS 4.8 (32-bit) to CentOS 5.4 (64-bit) on my AMD Sempron(tm) Processor LE-1300 system (it is running CentOS 4.8 32-bit because the disk images are from a previous PIII system), and things are 'interesting' WRT how the Lava Computer mfg Inc Quattro-PCI card is being handled. lspci (on CentOS 4.8 32-bit) yields: 01:0a.0 Serial controller:

I am a 62 year old beginner in Ubuntu. Thanks for any help, guidance, suggestions on this problem! I have used commands like the following to be certain that I have an active com port: dmesg | grep ttyS rm com1 ln -s /dev/ttyS0 com1 So I suspect the solution lies somewhere in WINE. If all else fails I will get a USB to SERIAL converter cable and try that. My wife has an Abbott Labs Freestyle

I have been investigating pci pass-through for virtualized guests and the documentation I have found seems to me to lack a certain consistency in its example. This may be due to my not understanding what it is trying to inform me. What I wish to do is to configure a pci multi-port serial i/o card for use by a single virtual host. I start by running lspci -v on the host to identify the serial

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hello, I've got RFID card reader plugged in serial port. cat /dev/ttyS0 ...gives me ID of the card I'm using => that's OK As soon as I open the port with win32 appication via wine... I get no data from reader. Even cat /dev/ttyS0 does not work anymore afterwards. I thinks it's because as soon as application opens it via wine some tty flags change: (PS: Of course I created

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

I get a message while booting of: ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe Googling for this, I find it is relatively common, and on different laptops. I thought it might be my internal SD reader causing the problems, but these other notebooks do not have such devices. Then I found: http://www.cl.cam.ac.uk/~pb22/I8600/ and: " IrDA -

Hi, On a regular FC4 machine there are 76 device file for /dev/ttyS*. I tried running minicom on a Xen machine (domain 0) whose serial port is connected to a different machine (a machine with no VGA/Keyboard/Mouse). It gave the following error: minicom: WARNING: configuration file not found, using defaults Device /dev/ttyS1 access failed: No such file or directory. So I checked, and ls

I'm trying to get the Windows-software for my digital camera to work in wine under Mandrake 8.0 (kernel 2.4.3). Installed wine without errors. Had a look at the ~/.wine/config and it looked ok for me. The part concerning the serial ports: [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4"

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42