similar to: 404 Response to Invite - Should be 401

I have a asterisk server with 6 Cisco ATA connected in SIP. My problem is that one of them is dropping calls an I can't figure out what is the problem; I had made a SIP DEBUG PEER 1088 that is the peer with the problem. Any help will be appreciate Thanks Erick Weber VoIP*CLI> sip debug peer 1088 SIP Debugging Enabled for IP: 201.133.170.82:5060 Peer RTP is at port 192.168.1.69:0 Peer

Surely there must be someone here who can help me with this problem. I have spent weeks trying to get this damned service to work with no luck. I have incoming calls working, but no outgoing. If get outgoing working then incoming don't work. I have sent this problem to this list a couple of times with little or no response, and I _really_ need some help to sort it out. I have an asterisk

I've been trying to use net2phone's sip service at sip.net2phone.com with * but keep getting SIP/2.0 401 Unauthorized. Do you know if this should be possible? So far: I can use an ata186 to connected directly to n2p through sip.net2phone.com without any special settings. I can connect from * to iconnecthere, but, whatever I try from * to n2p produces "SIP/2.0 401 Unauthorized"

Hi All, I have a GSM box, which needs to connect to a analogue phone line. I've plugged the GSM box to a Grandstream ATA (386). This ATA has extension number 600. Now what I want to accomplish is the following: - If a mobile-number is chosen by a user, asterisk needs to call the ATA (600), wait for a few seconds, and then send the mobile-phonenumber. Or, if it's possible, define the

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0

Hello, I have been trying to get my coders to work without a conversion. I have read all the available asterisk documentation and support groups without any luck. Here is my issue. (Please feel free to ask questions if you do not understand what I am talking about.) I am using Cisco ATA-186 set to g729 codec. (But it will switch to g711 if sip-server request g711) I have 2 SIP-services to

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set

I'm trying to setup a simple tcp sip connection based on the toronto osaka example in the Asterisk book. On the remote box (osaka) (1.8.9.0-rc1): [toronto] type=friend transport=tcp secret=welcome context=toronto_incoming host=dynamic disallow=all allow=ulaw sip show peer toronto * Name : toronto Secret : <Set> MD5Secret : <Not set> Remote Secret:

Symptoms: when calling my iconnect phone number (13033913323 in my bogus example below) from my cell phone, I can see that the call makes it to my asterisk server, and my phones even ring once as * passes the call through during the "180 Ringing" period. However, it seems that iconnecthere.com cannot see my "100 Trying" and "180 Ringing" messages, as they

I don't know what's changed, but four SPA841s and a SPA3000 are no longer answering when they get an inbound call from *. This has been a working configuration for weeks. I *have* been fiddling with the server config; however, the configuration is under version control and I've reverted everything to exactly how it was when the server was working. Doesn't fix it. I reset one of

Hello ! I 'm trying T.38 faxig with spandsp using rxfax/txfax as fax terminal. As another endpoint I 'm using Grandstream HT 486 ATA and a fax machine. Has anybody success with the HT486 as T.38 terminal ? ATA as originator: I managed only onetimes a successfull T.38 fax session. The other times the HT486 did not initiate a re-invite with T.38 parameters. Or shall the Terminator

Hi! I have the following problem with Asterisk 1.4.23: ATA w/ T.38 Asterisk ATA w/o T.38 --------INVITE--------> --------INVITE--------> <-------200OK---------- <-------200OK---------- --------ACK-----------> --------ACK-----------> --------INVITE

I know this has been asked before, but I've checked the archives and I haven't found anybody that has given a definitive yes or no, just "yeah, it should work.....". If I have a T.38 gateway like a Cisco 5300 and a T.38 ATA (whatever model) and I have canreinvite=yes, should T.38 work? I have it setup and it doesn't work, so I want to know if I am doing something wrong,

Hello list, this is the communication between an Aastra 5000 PBX and Asterisk, where the Aastra makes a call to Asterisk. For some reason, Asterisk responds with 401-Unauthorized and I don't know why. Calls go well with Panasonic PBX, Avaya PBX, Alcatel-Lucent PBX but NOT with this Aastra. A1.A1.A1.A1 = IP-address Asterisk PBX AS.AS.AS.AS = IP-address Aastra PBX Aastra PBX makes a call

I've been having problems getting MusicOnHold to work, so I've dumbed down my setup to as simple of a setup as I can. Asterisk 1.0.9. SIP ATA's (Sipura SPA-2002's) <SIP ATA 1> <---> <Asterisk> <---> <SIP ATA 2> Both ATA's have public IP's. No NAT'ing going on here. Reinvites are allowed so the media stream bypases Asterisk once a call

I have several SIP devices (Sipuras) that are working fine with *, except for one annoying little problem. Occassionally, after being registered for some period of time, the Sipura returns a 404 Not Found to (I assume) an INVITE request. Of course, this makes the extension appear busy. When this happens, I check the Sipura and it is thinks it is still registered and I check * and it shows

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

I've been getting a lot of timeouts on non-critical invite transactions. I turned on sip debug. They were the result of SIP invites like this: Retransmitting #10 (NAT) to 185.107.94.10:13057: SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 215.45.145.211:5060;branch=z9hG4bK-524287-1---zg4cfkl50hpwpv4p;received=185.107.94.10;rport=13057 From:

Hi! Net2Phone is getting a common SIP status code, "404 Not Found," when trying to place a call to our Asterisk server. We're hoping someone on the list can shed some light on why this is happening. We can process a call from Asterisk to Net2Phone without any problems. Net2Phone sends the INVITE but immediately gets the "404 Not Found." The "To:" field