similar to: Help: Boot FreeDOS from the second pri. partition

> On Fri, May 23, 2014 at 8:29 AM, Ady <ady-sf at hotmail.com> wrote: > > Testing the DOS-based Syslinux installer, syslinux.com, with the "-m" > > parameter, I found that it works as expected under MS-DOS and its DOS > > variants, but it seems to fail under FreeDOS (please correct me if > > I'm wrong). > > This sounds like either a bug in

I would like to boot FreeDOS ISO image from USB memory stick using syslinux. I have done following: 1) I created a partition to my 2GB memory stick: root at debian64:~# fdisk -lu /dev/sdb Disk /dev/sdb: 2013 MB, 2013265920 bytes 62 heads, 62 sectors/track, 1022 cylinders, total 3932160 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size

On Sat, May 24, 2014 at 11:22 PM, H. Peter Anvin <hpa at zytor.com> wrote: > On 05/24/2014 01:58 PM, Ady wrote: > > > > My guess is that if this was a bug in FreeDOS (as in "something" that > > has nothing to do with the syslinux.com command) then it would be > > somehow triggered by other DOS programs trying to write to the MBR. > > Considering

I and some other people have problems with running the freedos image included in Ultimate Boot CD (UBCD), when using memdisk for floppy emulation. Memdisk starts booting the image and freedos shows the following menu: 0 Boot Clean 1 Boot UMBPCI (silent) 2 Boot UMBPCI (optimal) 3 Boot UMBPCI (semi-defensive) 4 Boot EMM386 (optimal) 5 Boot EMM386 (semi-defensive) 6 Boot no UMB (defensive) 7 Boot

Testing the DOS-based Syslinux installer, syslinux.com, with the "-m" parameter, I found that it works as expected under MS-DOS and its DOS variants, but it seems to fail under FreeDOS (please correct me if I'm wrong). Using FreeDOS kernel v.2041 (386f32), Syslinux v.6.03-pre11 and either FAT16 or FAT32 partitions, executing: syslinux.com -m -i c: or: syslinux.com -f -m -i

Hi I'm using memdisk as part of CD Shell' isolinux. I've created custom floppy disk image 8440kB size. I've put FreeDOS kernel and bootsector into the floppy. Boot process goes fine with this command: isolinux /boot/memdisk initrd=/ximg/fdos.img c=60 h=8 s=36 floppy The problems begin when I try to run FreeDOS memory manager emm386 from the floppy image. my config.sys: ...

I've got $SUBJ almost working except for the DOS bit where the CD needs to be read. My pxe config: label Firmware menu label Update IPMI firmware kernel memdisk append keeppxe raw iso initrd=<isofile> The ISO is about 400Mb, and works fine when I boot it from an actual CDROM drive. It also boots fine over PXE, I can see FreeDOS being booted up etc. The problem is - once

Sorry for the delay, I should not send email on an holiday week-end. I'll try to answer all the questions by explaining what does work for me right now, and what I'd like to do. I have a script to create the a USB stick or an ISO image. The boot media contains many DOS images, and I use versamenu to select one of them. If my DOS image is smaller than 8megs, everything is working fine as

(FreeDOS developers, I apologize for the redundant parts of this message. But I want to bring the SYSLINUX folks into the discussion, and the SourceForge mailing list archives are broken.) Background: I have a little Sourceforge project (http://unattended.sourceforge.net/) for which I use SYSLINUX to provide CD-ROM and PXE boot support for my boot disk. And it works great with MS-DOS. However,

_ Vbox 4.2.18 VM booted with FreeDOS floppy, kernel 2041, no config.sys, no autoexec.bat, no TSR's, no memory managers. _ The booting floppy includes syslinux.com 6.02. _ Two HDD images attached to the VM, MBR + 1 FAT16 formatted partition each. Executing syslinux.com -i c: (or "d:") results in the following error: "Invalid Opcode at AD04 5080 0206 5080 2021 3666 FFFD 0083

Hi Maybe HPA or Murali could help me with this one, or anyone who got the following working. I spend numerous hours reading the list and googling without success. I'd like to create a bootable USB stick and CDROM that will do the following. I will have a menu, from which I could pick a specific dos image (not partition). The dos images could have up to 20Megs in size. The goal is to have

Hi, I did found the problem, a combination of 2 factor. 1- I taught that I did install the latest syslinux, but in fact it was the 3.36 version. 2- Thank to kevin Connelly, he point me to a problem he got with mkdosfs command. The default FAT16 do not work, but the FAT12 do. By adding -F12 to the mkdosfs command fix the problem. The default F16 do seem to work for <8M floppy image. Thank you

Hi, I'm trying to make a triple-boot recovery CD containing Linux System Rescue, XP Recovery Console, and DOS/WinME for GHOST etc. I can compile the ISO fine, and the System Rescue stuff works fine too, but when I try to boot the XP image isolinux says "Image checksum failure... sorry" and dies. Details below, separated with dashes

Hi all :) that's my first post, he =) I need some help about having the IPAPPEND 3 in my freedos (odin) environnement after a PXE boot using PXELinux / Memdisk... i've been searching for few hours now, but didn't found anything.. Is there a way to get that done ? Thanks in advance J?r?mie 'ahFeel' BORDIER

With the same configuration an ISOLINUX CD which boots a FreeDOS Floppy image via MEMDISK Syslinux-3.73 crashes in VMWare and also on several newer boxes just after the kernel loading with "invalid OPCODE ...". Same CD with Syslinux-3.72 is working fine. Build environment for 3.72 was gcc-4.3.2 for 3.73 gcc-4.3.3 - any idea what can cause the troubles? --

Sensei H. Peter Anvin, I have successfully modified/enhanced memdisk so that one can chainload a local operating system after running diskless FreeDOS. I would like your advice regarding the appropriate interface for invoking this functionality. In addition, I would like to know what steps to take so that you feel comfortable considering including this in the standard syslinux distribution.

Hello, when I try to boot from my computer extlinux needs about one minute before the boot menu is shown. Here's my system configuration -Two IDE drives on one controller -Second hdd is boot hdd -I'm using Arch Linux (i686) Is there an official bug tracker which I can use? I only found the debian bug tracker and I can't find any information about bugs on the homepage. Here is my

I have written a bash script (see below) to generate bootable SD-USB images using syslinux as booter. The script works OK with versions 3.63 and 3.71, but I get a null pointer error executing /tmp/$SYSLINUX/linux/syslinux -sf -o 16384 SD.img in 3.72. If you execute $ sudo sh SDformat.sh sys then you can test the image easily with qemu $ qemu -hda SD.img ++++++ SDformat.sh

> Hi, > > OK. I build syslinux-6.02-pre6 from > https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz > on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from > experimental): > > root at jessie: ~# cd /tmp > root at jessie:/tmp# wget >

Hallo, I try to boot the windows 98 bootdisk via memdisk. It doesn't work completely. Booting a freedos FD image works, booting the windows 98 image works too. But the windows 98 boot disk then should extract the file "ebd.cab" with the file "extract.com", and that step fails. Is that a syslinux problem or a windows problem? Viele Gruesse! Helmut