similar to: MGE Pulsar evolution 2200

Well, either I misunderstood what you wrote or (my initially written post follows, probably misguided at start) I think your log contradicts your statements: > when my bash script receive events from TIMER like LINE-STATUS-xx > NOTIFYTYPE is always ONBATT > in all other cases, NOTIFYTYPE is TRUE and same as it was called by upsmon in the log I see : * Initial ONBATT: Apr 1 17:07:39

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

HI i'am using schema upsmon call : NOTIFYCMD /sbin/upssched and this part of upsschede strategy (working fine) device.model: Ellipse ECO 650 root at ---:~# cat /etc/nut/upssched.conf # Network UPS Tools - upssched.conf sample file CMDSCRIPT /opt/nut/bin/upssched-cmd PIPEFN /var/run/nut/upssched.pipe LOCKFN /var/run/nut/upssched.lock #

Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID

hello, I installed with NUT UPS MGE Pulsar Evolution 2200 all orders of arrest, interrogation etc etc ... UPS work well However, I have a problem with the order in NOTIFYCMD upsmon.conf that not run ... I created a script that generates a simply log I indicated in upsmon.conf NOTIFYCMD / home / nut / alert_ups.sh below my upsmon.conf RUN_AS_USER nut MONITOR pulsar at localhost 1 admin1

Hi Jim ii ?nut ??????????????????????????????????2.7.4-13 ??????????????????????????all ?????????network UPS tools - metapackage ii ?nut-client ???????????????????????????2.7.4-13 ??????????????????????????amd64 ???????network UPS tools - clients ii ?nut-server ???????????????????????????2.7.4-13 ??????????????????????????amd64 ???????network UPS tools - core system debian 11 I'am

On Sat, 21 Dec 2019, Bartosz wrote: > Hi Roger, > have you ever tested the > ups.delay.start: 40  > parameter in action? > Does it actually work in your UPS? Yes, thoroughly tested, and it works as described in my Configuration Examples. (Including correct operation during this morning's storm :-) > Could you send me a link to your UPS on the Internet? I see that there

My UPS is a Eaton Ellipse 1000S (But its identified as MGE Ellipse 0463:ffff). I have been using the usb interface with the usbhid-ups driver, but I found that sometimes (too much times) the driver doesn't respond and NUT doesn't receive changes nor notifications from the UPS. The kernel lose the connections with USB device, in the kernel logs appears: Dec 30 11:24:12 rei kernel:

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hello I almost managed to make everything work my server isn't in prodution because i had some problem on others system but last week i come back and i run an update on ubuntu 12.04.1 to 12.04.2 I don't known if its' the reaseon or if someone has change something but scripts no longer work I have a message "returned 2" Can you help me because I don't find how to solve

Hello, I can't make a brand new APC SmartUPS 1000 (REF SMT1000I) communicate with a ubuntu 8.04 server via usb port. NUT version 2.2.1 seems to be the last on ubuntu 8.04 Could you help me please ? Thanks Herv? Mazzilli ----------------------------------------------------------------------------------------------- root at myserver: lsusb -vvv --> Protocol spec without prior Class and

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctly too. The problem is that after UPS shuts down, it immediatelly brings the

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Hello My server with another UPS (MGE Pulsar Evolution2200 USB) is OK. All scripts work Is it possible to work with a UPS MGE CometExtrem 6 on serial port Which driver can I use ? I tried with mge-shut ou mge-utalk without any success when I start driver with upsdrvctl with mge-utalk I have (after a long time) Can't connect to UPS [MGE_cometEX] (mge-utalk-MGE_cometEX): No such

Hi everybody, I recently bought a UPS Cyber Power DX600E ad I'm trying to manage it through Nut under FreeBSD. Unfortunately, usbhid-ups returns an error when I do: [root at berkelium /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -u root -DD -a onduleur Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '2'

hello, I tested all config with my ups and psp all seems to be OK now, I had change ups name and user name in ups.conf, upsd.users, upsmon.conf etc etc ... but I have quickly these events in my syslog without doing anyting what can I do ? Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed - Data stale thanks a lot for your help Sabine GOUDARD Ecole Nationale

Hello, I have a EATON 5PX with a Network Management Card on ubuntu 12.04 I established a shutdown procedure like described in rogerprice.org It works I have an event mail on "onbatt" then another on "onbattdelay1" then the "upsmon -c fsd" order on "onbattedelay2" When "onbattdelay2" is finished, my server execute "auto logout and shutdown

Dear List, I'm trying to perform an automatic server shutdown and restart with NUT 2.6.3, openSUSE 12.2 and an Eaton Eco 1600. The server shutdown works but there is no automatic restart when wall power returns. Unlike successful tests with earlier versions of openSUSE, the UPS unit is never switched off. It goes on beeping for as long as I let it. When I pulled the plug from the wall

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

On 9/28/06, Ingo Schaefer <ingo@ingo-schaefer.de> wrote: > Hallo, > > I installed nut 2.0.4 on a Solaris 8 and tried two things: > > First I wanted the ups to connect via usb, but I could not compile the > usb drivers. Make usb told me: no target named usb found Do you have libusb installed? (I was not aware that there was a port of libusb for versions of Solaris before