similar to: Distinctive Ring on parked call timeout

I'm using Asterisk 1.8.10.1 SIP on Linux -----Original Message----- From: motty.cruz [mailto:motty.cruz at gmail.com] Sent: Monday, March 19, 2012 3:43 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Distinctive Ring on parked call timeout Hi, Is there a way to have a distinctive ring for the polycom phones when the timeout is reached on a parked call? I

The answer is yes, I think, but I don't recall precisely how off the top of my head, and I'm walking out the door in a moment. The phone will hold more than a dozen distinct ring tones which you can create for yourself, and you can have asterisk direct it to use a ring tone independently of line appearance. The most direct way would be with the SIP Alert-Info field, but the phone itself

This feature also works on the IP301 phones. The obvious caveat is that it is one-way only. Still nice for an "all-page" though. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To:

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

BOFH told me he uses it to listen to his co-workers > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To: asterisk-users@lists.digium.com > Subject: SOLVED: Re: [Asterisk-Users] Polycom IP501 with Asterisk - > distinctive

This is my first foray into SIP telephony, so be gentle. :-) The Polycom SoundPoint IP 501 phones have been fantastic so far. I still have a lot to learn when it comes to them, but the manual seems pretty extensive and so far Asterisk has been playing well with them. I have a need to be able to identify incoming calls based on some factor (could be time of day, caller ID, dialed number, it

I am somewhat unsure as to the definition of "Distinctive Ring". What I am trying to achieve is to have Zap connected phones (TDM400P) ring with different cadences depending on whether the call is incoming on the PSTN context or an IAX2 context. Googling, I find this from Mark: I've added distinctive ring support to Asterisk now (also I've added answer confirmation which is

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hello List, So I have a few MiTel 5224 IP phones running in SIP mode. Per the phones documentation they honor SIP distinctive ring tones. I am able to send the correct ALERT_INFO message in an invite from Asterisk to the phone, but I don't know what ring tone to call. From the reading I've done the syntax is: [3155791234] exten => s,1,Set(_ALERT_INFO=Ring 8) exten =>

Hello - I have a TDM400P with 2 FXO and 2 FXS modules. Feeding the FXS modules are two VOIP lines which are terminated by VOIP adapters and have regular RJ11 wires connecting to the FXS ports. Since the two different VOIP lines have different phone numbers, and I know and can tell asterisk which VOIP line is connected to which FXS port, can I cause a distinctive ring on the extensions if a call

In the archives, I have found discussion of detection of incoming distinctive ring patterns dating back almost 2 years, but I have not been able to figure out whether it is partially functional or even whether it is definitely planned. When I call Asterisk with a distinctive ring, it

Hi All, I was wondering what the status of distinctive ring support in Asterisk is? I had a google search & read and Mark Spencer wrote some support for it. Is distinctive ring different in every country or is it pretty standard? And for my final question, does the Wildcard FXO card support distinctive ring? Essentially what I'm trying to do is route incoming calls with ring #1 to,

Hello List I have searched the lists, the wiki and the handbook and see how to use distinctive ring inside however I can't find incoming. I have 1 x100p and 2 phone numbers, My Voice calls are normal ring, my Fax are short short long. How do I tell * to route the call to an extension based on the ring candance? Is it possible? Right now it seems when the x100p sees the short short long it

I have been looking into how to setup distinctive ringing on a SPA-2100. So far the only thing i have been able to find is how to define a distinctive ring in the spa config. What i cannot figure out is what SIP message i need to be sending to it in order for it use the ring. I did find out how to add the sip message for distinctive ring i just dont know what variable needs to be passed in order

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Russell Bryant wrote: > Greetings! > > Version 1.0.8 has been released of Asterisk, Asterisk-addons, Zaptel, > and Libpri. This release contains a significant amount of bug fixes > (possibly the most of the 1.0.X releases). Tarballs are available on > the asterisk web site as well as the asterisk ftp server. Thanks! I appreciate the effort you put into these releases.

I have a line from BT (UK) connected to my asterisk system, on a TDM400P. I am able to see either distinctive ring cadences or caller ID but not both. If I try to enable both, all drings show up as 0,0,0. This is a pain because, if I make a call out over that line and the number I call is busy, I can elect to camp on it (ringback), which results in a different cadence of ring when the called

Using distinctive ring detection with bell202 cid, is there any way to tell DAHDI to sometimes expect the cid after the 2nd ring, other times after the 1st? I just added RingMaster service (2nd DID w/ distinctive ring) to a TDM800P FXO line. No problem setting dringcontext for the 2nd DID. The 1st DID works normally, but I get no CallerID on the 2nd because the call is picked up before the

I'm looking to give the SPA-3000 a whirl as I'm having too much difficulty with the irq sharing thing inside the box. I'm reading the book but without having one in-hand to play with it appears a little obtuse at this time. Before I drop down my money can someone with some hands-on with one of these confirm if the SPA-3000 can: a) detect inbound distinctive ring (this looks to me like