similar to: [PATCH V3] virt-sysprep:add ipconfig for preparation

Hi Rich: I just send a patch to request for your comments, then will do further work about this. things like this: [root at Allen ~]# virt-sysprep --ipconfig="eth0:192.168.1.2,255.255.255.0,192.168.1.1" --enable=ipconfig -d clone-6u1 OR [root at Allen ~]# virt-sysprep -d clone-6u1 Please comments. Thanks -Wanlong Gao Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com>

Hi Rich: V1->V2: add the documentation. Any comments? Thanks, Wanlong Gao --------------------------------------------------------------------------------------------------- Add the the ipconfig for vir-prep. Usage like below: [root at Allen ~]# virt-sysprep --ipconfig="eth0:192.168.1.2,255.255.255.0,192.168.1.1" --enable=ipconfig -d clone-6u1 OR [root at Allen ~]#

We just remove the process accounting files previously without touch a empty file, this will cause psacct runs error. Restart the service can't help us create this file auto. couldn't open file '/var/account/pacct': No such file or directory Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com> --- po/POTFILES-ml | 1 + sysprep/Makefile.am

In the TODO file there's a discussion of perhaps writing a new 'virt-customize' tool. I think it's probably better (or at any rate, easier) to just add this functionality into virt-sysprep. That is what this small series of patches aims to achieve. Note these are not very well tested at the moment. The first patch adds a generic and useful '--firstboot' flag. The

Hi, Here are two fixes for ipconfig/dhcp, the second of them being required for my dhcp3 server to accept ipconfig's requests. Thanks, Louis Louis Rilling (2): ipconfig: Fix missing dhcp_end field ipconfig: Fix null ciaddr on DHCPREQUEST during SELECTING state usr/kinit/ipconfig/dhcp_proto.c | 4 ++-- usr/kinit/ipconfig/packet.c | 2 +- 2 files changed, 3

Hi, it seems that ipconfig has a problem if multiple devices are up and connected to the same network. It seems that it uses the wrong socket/device index to compare it to incoming packet. To be more precise, the packet gets discarded in do_pkt_recv as the ifindex from state differs always from the incoming packet To reproduce create two tap devices: $ sudo tunctl -u uli -t tap0

Hi, I had the problem that 'ipconfig' as DHCP client in Debian-squeeze could not get DHCP Offer reply from the built-in DHCP server of the cheap route that I have. The name of the router is 'MegaBitGear TE4571E' which I got at contract of ADSL Internet access service in 2009. The router is not too old and can reply to other DHCP clients like ISC-dhclient, WindowsXP and Vista.

This patch fixes a bug on systems with multiple connected network devices. As packet_peek uses all devices to receive data instead of a specific device. As the return value was never reset it was possible that packets from other devices were returned by packet_peek. That means that the ifindex did not match any ifindex of the specified devices the packet was never removed and packets for the

Hi, ipconfig is used in ltsp (thin clients) initramfs. Some of the users have to have 2 dhcp servers in ltsp environments, so they hit on this problem: The first dhcp request is from the pxe rom boot code. This code ignores any dhcp offers that don't have a filename field. So they always get the correct address, from the ltsp server. The second dhcp request (in initramfs) is done by

From: Geert Stappers <stappers at debian.org> To make klibc-ipconfig transmit the DHCP vendor class "d-i" and get the DHCP preseeding filename in a text file, it needs the attached patch. belows patch allows ipconfig to be used in Debian installer once the hostname is sent too, see http://blog.andrew.net.au/2006/05/17#d-i_dhcp_hacking Signed-off-by: maximilian attems <maks at

I had an odd situation yesterday, klibc 1.5.17 ipconfig was trying DHCP on all 3 NICs in the server, but one has a bad switch that causes the link on eth2 to go up/down every 10 seconds. IPconfig would just time out. If I tell ipconfig to only try eth0, then DHCP address is configured, and the netboot proceeds 100%. I'll take a peek at the code but maybe someone here is familiar with the

Hi!! I found your ipconfig stuff in the udev rpm in SuSE 9.1. I'm about to setup a initramfs (pretty cool - much better than initrd) to boot linux diskless clients over the net. All the tools I would need, seem to be there with ipconfig/nfsmount ... I like to use the information I get from PXE/syslinux or Etherboot writing something like:

Hello, I found a bug in ipconfig and I'm sending a proposed patch for it. I've only seen it happen in 2 dhcp-server environments. Scenario: ipconfig sends a DHCP_DISCOVER, server A answers with a DHCP_OFFER, server B answers with a DHCP_OFFER, ipconfig sends a DHCP_REQUEST for server A, ipconfig accepts the DHCP_OFFER from server B instead of DHCP_ACK from server A. <== BUG The reason

I'm still pondering with kbuild and klibc. Next in line was to get ipconfig support in the kernel (build wise). A little challenge that is bigger than anticipated was to create a shared executable. This required a far bigger rewrite of Kbuild.klibc than originally planned. The good part is that I now managed to treat linking of objects with single and multiple .o files almost the same.

Remove hostname from network interface configuration. Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com> --- po/POTFILES-ml | 1 + sysprep/Makefile.am | 1 + sysprep/sysprep_operation_net_hostname.ml | 58 +++++++++++++++++++++++++++++++ 3 files changed, 60 insertions(+) create mode 100644 sysprep/sysprep_operation_net_hostname.ml

this is just on the common path, need to checkout others too, but a start: commit 5501109f6597f2bbed17a264b247c36220362dfb Author: maximilian attems <max at stro.at> Date: Mon Apr 26 08:07:51 2010 +0200 [klibc] ipconfig: Fix valgrind errors valgrind was rightfully complaining on ipconfig eth0: ERROR SUMMARY: 5 errors from 4 contexts (suppressed: 0 from 0) all

hey all, i am trying to run a program called 'kintecus' on a mac. it was originally written for win (and linux) machines, so i ended up using wine (to get the windows version running). the problem is, it creates a 'unique computer ID' which you have to send to the author in order for it to work (he will provide then a code that allows you to run the program). this is done when it

klibcs ipconfig tries to guess the nameserver if no nameserver is provided. This may happen due to misconfigured dhcp or the use of the ip= parameter. This patch removes the guessing from ipconfig as it is not possible for any other script to determine if the provided nameserver is valid or a guessed one. If the old behavior is really needed this could be easily implemented in an external script.

The following patches come from Debian and/or Ubuntu packages of klibc. Ben. Ben Hutchings (1): [klibc] run-init: Add dry-run mode Jay Vosburgh (1): [klibc] ipconfig: Use separate sockets for DHCP from multiple interfaces Mathieu Trudel-Lapierre (1): [klibc] ipconfig: Set broadcast when sending DHCPREQUEST and DHCPDISCOVER YunQiang Su (1): [klibc] mips: setjmp.S: don't

On Sat, 2020-07-25 at 17:47 +0100, Ben Hutchings wrote: > On Sun, 2020-03-29 at 04:38 -0700, Bill Wendling wrote: > > - Renamed IMAGE_BASE to LD_IMAGE_BASE_OPT. > > - Moved "-fcommon" to KLIBCREQFLAGS in scripts/Kbuild.klibc. > > - Remove "dash" warning fixes which have been upstreamed. > > - Conditionalize the inclusion of compiler flags by using the