similar to: Bug#503044: Should update README.Debian re loop devices as well

On Wed, 22 Oct 2008, Russell Coker wrote: > It seems reasonable to create a file /etc/modprobe.d/xen that contains > the following line to alleviate this: > options loop max_loop=32 Since kernel 2.6.22, loop devices are allocated dynamically, so that you can `mknod /dev/loopN b 7 N` for any N and start using it immediately. The max_loop option causes more loop devices to be

Package: xen-utils-3.0 Version: 3.0.2+hg9681-1 Severity: minor Here comes another bug report :) >From README.Debian: |* About networking: | | By default Xen modifies your networking configuration, creating a bridge. | To avoid breaking a machine's connection to the network the debian package | doesn't touch the network configuration unless requested. On the other hand | xen

Package: xen-utils-common Version: 3.2.0-2 Severity: normal When file: sources are used for Xen block devices the Xen system will use a loopback device for each one. It's quite common for DomUs to be configured with two block devices (one for storage and one for swap) and not uncommon to have a block device for each filesystem (which makes it easier to grow filesystems). Therefore the

Hello, The CRAN checks for the drake package (4.1.0) fail for r-devel-linux-x86_64-debian-clang. This happened right when crayon 1.3.4 was released, but I suspect the problem is not with crayon or drake, but with base R-devel. I cannot reproduce the error myself, but I have copied a minimal working example (MWE) below that should theoretically isolate the problem. `find_namespaced_functions()`

All, I've spent quite a few hours trying to figure this out to no avail... I have two machines and the result is the same on both. Additionally, each machine does not support full hardware virtualization... I am able to create 8 VMs. When attempting to create ninth VM, I get the following error: Error: Device 51712 (vbd) could not be connected. /etc/xen/scripts/block failed; error

hello, I believe I have started guest VM now. Is there any GUI support for guest VM? I tried to "apt-get install gnome", but it doesnot work. My host OS is ubuntu 10.10. 2011/1/18 Ian Tobin <itobin@tidyhosts.com> > Hi, > > > > On debian you need to create or open > > > > /etc/modprobe.d/local-loop > > > > and add > > > > options

Hello Drake, I am doing the same... Spanish TV to my UK home, and UK TV to my Spanish home, using Kodi and TVHeadend!!It works really well, but find that I need powerful PCs running Kodi/PVR-HTS to prevent buffering. The Tinc VPN does not filter ports - all ports are available at each end. Since you're likely to be behind NAT this is safe. The port numbers 9981 and 9982 are only needed in the

Guys, OK, now that we have the new core contributors squared away, we can go back to finishing the contributors list. There were some people who got added and then there is existing contributors list. I think Darren''s suggestion to wait to add new core contributors is fine (let the new constitution settle down and we can in the meanwhile have a more inclusive look at both rather than

> On Mar 27, 2020, at 12:23 AM, Johannes Doerfert <johannesdoerfert at gmail.com> wrote: > > > > Getting to a multithread clean optimizer is not one bug fix away - > > this is a multiyear journey, and I would prefer not to see big changes > > with unclear tradeoffs made in an effort to get a quick win. > > I think I missed the suggestion of "big

On Mon, Jul 08, 2019 at 01:17:44PM +0800, Daniel Drake wrote: > From: Lukas Wunner <lukas at wunner.de> > > The integrated HDA controller on Nvidia GPUs can be hidden with a bit in > the GPU's config space. Information about this scheme was provided by > NVIDIA on their forums. > > Many laptops now ship with this device hidden, meaning that Linux users > of

Get it connected first and able to ping the remote server's IP. Then, you should be able to access stuff on the server network as if you were on that LAN. You should also remove the pet forwarding on the client side. It's unnecessary. Get Outlook for Android<https://aka.ms/ghei36> On Thu, Feb 7, 2019 at 12:49 PM -0500, "Drake Drake" <drakemails at

> I have installed xen-unstable change set 1150. I have 3 nics in my system. > > My ifconfig shows eth1, eth4 and eth5. > > And a brctl show shows xenbr1 only. > > When I try to create bridge 4 > > /etc/xen/scripts/network-bridge vifnum=4 start > > > > Link veth4 is missing. (...) > I tried increasing the loopback devices in the kernel boot

I believe what's missing at this point is a mmiotrace of the NVIDIA driver to make sure that there's nothing different about this GPU. If you can make one (see https://wiki.ubuntu.com/X/MMIOTracing for a guide - should end up ~100MB uncompressed), please send a compressed one to mmio.dumps at gmail.com or make available some other way. On Tue, Feb 14, 2017 at 2:34 PM, Daniel Drake

I have syslinux booting slax off of a usb stick but in the process I think I may have found a bug in syslinux im using version syslinux-3.31 my syslinux.cfg use to look as follows <== beginning display boot/splash.cfg default slax autoexec=startx prompt 1 timeout 40 F1 boot/splash.txt F2 boot/splash2.txt F3 boot/splash.cfg label slax kernel boot/vmlinuz append vga=769 changes=slaxsave.dat

Here is a patch to the Debian xen-3 3.4.0-1 package that reenables ioemu. I have been using it for the last four weeks. (I understand there are reasons this cannot go into Debian yet, but hopefully it will be useful to people that depend on running HVMs today.) Anders -------------- next part -------------- --- xen-3/debian/changelog +++ xen-3/debian/changelog @@ -1,3 +1,10 @@ +xen-3

On Thu, Jun 13, 2019 at 2:35 AM Daniel Drake <drake at endlessm.com> wrote: > > From: Lukas Wunner <lukas at wunner.de> > > The integrated HDA controller on Nvidia GPUs can be hidden with a bit in > the GPU's config space. Information about this scheme was provided by > NVIDIA on their forums. > > Many laptops now ship with this device hidden, meaning that

On Thu, Sep 13, 2018 at 5:37 AM Daniel Drake <drake at endlessm.com> wrote: > > On 38+ Intel-based Asus products, the nvidia GPU becomes unusable > after S3 suspend/resume. The affected products include multiple > generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs > many errors such as: > > fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR]

Hi, I am new to using wine. I wanted to run our office's tax preparation program (Drake). Using wine, I installed a workstation version of Drake by running a program off the server, as has been done on the windoze machines here. I can get the program to start (the console shows "fixme:wininet: InternetGetConnectedState always returning LAN connection", but I understand that this is

On Wed, Sep 12, 2018 at 8:45 AM Daniel Drake <drake at endlessm.com> wrote: > > On 38+ Intel-based Asus products, the nvidia GPU becomes unusable > after S3 suspend/resume. The affected products include multiple > generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs > many errors such as: > > fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR]

> On Mar 26, 2020, at 8:26 AM, Doerfert, Johannes <jdoerfert at anl.gov> wrote: > > On 3/26/20 5:53 AM, Florian Hahn wrote: >>> It also doesn't solve the problem of Functions themselves -- those are >>> also GlobalValues… >> >> >> I am not sure why not. Function passes should only rely on the information at the callsite & from the