similar to: kickstart partitioning and cylinder boundary

Hello. A couple of years ago I installed two file-servers using kickstart. The server has two 1TB sata disks with two software raid1 partitions as follows: # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb4[1] sda4[0] 933448704 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda2[2](F) 40957568 blocks [2/1] [_U] Now the drives are starting to be failing and next week

I have 2 questions dealing with 2 different kickstart files. 1) my kickstart sections for RAID disk setup and kickstart reports it cannot find sda. Why is that. sda is there and works. clearpart --all --initlabel part raid.01 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda1 --size=20000 part swap --asprimary --bytes-per-inode=4096 --fstype="swap"

I have a couple lines like: part / --ondisk=sda --fstype ext3 --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /home --ondisk=sda --fstype ext3 --size=1 --asprimary --grow in my kickstart file. Is there a way to have 1 kickstart file that works for hda and sda both??? So I would like to have 1 kickstart file that works for either a hda

I am trying to add an efi partition to my working kickstart file. bootloader --driveorder=sda --append="rhgb quiet biosdevname=0 net.ifnames=0" clearpart --all --initlabel part / --ondisk=sda --fstype xfs --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /boot/efi --ondisk=sda --fstype efi --size=1000 --asprimary part /home --ondisk=sda

Greetings. There must be some minor changes to anaconda. I'm getting the error: "Cannot open repomd.xml file...." the file seems to be located in the repodata directory... I'm using the following .cf taken directly from the CentOS 4.4 install : install url --url ftp://centos.westmancom.com/5.0/os/i386/ #cdrom lang en_US.UTF-8 langsupport --default=en_US.UTF-8 en_US.UTF-8

I am testing some kickstarts on ESXi virtual machine with pair of 16GB disks. Partitioning is lvm over raid. If i am using "logvol --grow i get "ValueError: not enough free space in volume group" Only workaround i can find is to add --maxsize=XXX where XXX is at least 640MB less than available. (10 extents or 320Mb per created logical volume) Following snippet is failing with

Hey, Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config. It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol) It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not

On Thu, August 4, 2016 7:13 pm, Paul Heinlein wrote: > On Thu, 4 Aug 2016, Valeri Galtsev wrote: > >> Dear Experts, >> >> Could somebody point to kicstart HOWTO specific for CentOS 7? >> >> On CentOS 7 I somehow am always given human intervention questions >> about drive which defeats unattended ks install. >> >> At least one snag I hit

I was just wondering how (or indeed if) people use the %include directive in Kickstart configuration files when building systems via NFS. I've been trying to modularise our Kickstart files a little to make things more readable, having generic defaults and role specific stuff split out into separate configs. I've tried this configuration... [root at archive kickstart]# cat

Hello, I'm trying to do a kickstart install of centos5. I'm pulling it off a network server and i'm getting an error, in the parsing of the file. It refers to line 31, i'm not going to show the complete file, but here is the indicated line: raid swap --fstype swap --level=RAID1 raid.4 raid.7 and the raid lines: part raid.7 --size=512 --ondisk=hdb part raid.4 --size=512

Is there a reason why after a software raid install (from kickstart) that md1 is always unclean. md0 seems fine. boot screen says md1 is dirty and cat /proc/mdstat show md1 as being rebuilt. Any ideas? Jerry --------------- my kickstart -------------- echo "bootloader --location=mbr --driveorder=$HD1SHORT --append=\"rhgb quiet\" " >

I am trying to install Centos 7 on a couple 4TB drives with software raid. In the Supermicro bios I set UEFI/BIOS boot mode to legacy. I am using the Centos 7 minimal install ISO flashed to a USB thumb drive. So I do custom drive layout something like this using sda and sdb. Create /boot as 512 MB XFS raid1 array. Create SWAP as 32 GB SWAP raid1 array. Create / on 3.xxx TB XFS raid1 array.

HI all, I just did a fresh C7 install using kickstart. fdisk -l /dev/sda shows: # Start End Size Type Name 1 2048 2050047 1000M EFI System EFI System Partition 2 2050048 104450047 48.8G Microsoft basic 3 104450048 112642047 3.9G Linux swap 4 112642048 234440703 58.1G Microsoft basic What extra do I need to

Hi All, I have a new system with 2 Seagate 1TB SATA Enterprise level drives in it. I want to RAID1 (mirror) these drives. This machine will be a web-server in my apartment hosting an HTML video fan site I am creating. Apache, MySQL, PHP etc. This site will easily be 300+ gigs with all the versions of each video, the MySQL won't be huge, but will grow as data for each video is added (i.e

Has anyone gotten this to work ? I can define a raid device but cant put a VG on it. I then tried 'autopartition' and it created an 'LVM' of sorts, when I tried to edit it I wasnt able to as a message appeared saying, LVM editing was not allowed in text mode. Any help ? Cheers, Brian. PS - PIII-500mhz 128mb RAM, 4mb AGP.

centos-virt, I'm trying to create/install domU guests all in "one" step, following Daniel's wiki page (I've found these pages really helpful, BTW): http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU I have a few questions about this process: (1) How would it be modified (w/respect to defining the disk in the domain configuration file) to use a disk layout where dom0

I've set up a local webserver to store kickstart files for domUs. All parameters are respected apart from the network settings. DomU always gets DHCP. Can any one help to unwrap this one? Does one add hostname, ip, netmask and gateway values to the /etc/xen/blah.cfg file? # ---- domU kickstart file ----# url --url http://192.168.1.120/centos/5/os/i386 lang en_US.UTF-8 keyboard uk network

Dear Experts, Could somebody point to kicstart HOWTO specific for CentOS 7? On CentOS 7 I somehow am always given human intervention questions about drive which defeats unattended ks install. <rant ??> I'm doing kickstart installations for quite some time, normally I was just installing system when new release comes, and am basing kickstart file on anaconda-ks.cfg - with some

Hi All, This has to be something simple....but it's really busting my chops. We have a PXE boot server that is used for initial installation of a number of operating systems and it works well. However the CentOS 5.1 x86_64 install is seriously broken. We've made the PXE boot images available from "centos/5/os/x86_64/images/pxeboot/" in the tftp boot etc. We've rsynced

I am trying to install on a kvm virtual machine (host is C5). At some point it stops with install error about cyrus-sasl. I goto the /root/install.log in I have a number of errors about: Installing libstdc++ warning %post scriplet failed. exit status 127 Install zlib warning %post scriptlet failed. exit status 127 Install libxml2 warning %post scriplet failed. exit status 127 this continues for