similar to: changing the drawing context using Cairo and RGtk2

When using a gtkDrawingArea as a Cairo device I very often encounter the error: "figure margins too large" Even for the below "getting started" example from http://www.ggobi.org/rgtk2/ this is the case. > win = gtkWindow() > da = gtkDrawingArea() > win$add(da) > asCairoDevice(da) [1] TRUE > plot(1:10) Fehler in plot.new() : Grafikr?nder zu gro? > Also

I try to overlay a plot inside a gtkDrawingArea with a button (or any other widget). I tried to put both into a gtkFixed container. But this does not work, no printing occurs. Does someone know a solution? What I tried: w <- gtkWindow() w$setSizeRequest(400,400) fx <- gtkFixed() da <- gtkDrawingArea() fx$put(da, 100, 100) asCairoDevice(da) par(mar=c(0,0,0,0)) plot(1:10) btn.1

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

A problem with 4.8 reported by myself and Aaron D. Gifford. Anyone in -stable who knows more? ******** I'm assembling a Compaq 1850R with attached storage system. For the built in scsi controller (sym), there are three drives internally on channel 1 + 5 drives externally on channel 2. During boot, I can see all disks being identified first by the machine itself and then in the early part

Hi R-devel I use the packages RGtk2 and cairoDevice. The cairoDevice package has a few stand-alone functions, plus "asCairoDevice" which depends on RGtk2 and calls require(RGtk2). So cairoDevice lists RGtk2 under "Suggests" in the DESCRIPTION file. It can not Import RGtk2 because that would force all users to install RGtk2. The upshot of this is, if you *import* the RGtk2

Hi all, I first create a matrix/data frame called "d2" if another matrix accomplishes some restrictions "dacc2" da2<-da1[colSums(dacc2)>9,] da2<-da2[(da2[,13]=24),] write.csv(da2, file =paste('hggi', i,'.csv',sep = '')) The thing is if finally da2 cannot get/passs the filters, it cannot writte a csv because there is no any true condition.

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the pool is

Hi ... Can someone tell me whether or not this is indicative of a hardware, or software, problem? It happened a few times today, on two different drives, and it seem to "self-recover", since the server is still purring along without any noticeable problems: neptune# grep "timed out" /var/log/messages Jul 25 03:52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out

I've got a new supermicro server I'm trying to get FreeBSD on. It uses the Intel c602 chipset, and it's my understanding that support for that chipset (c60X) was recently added via the isci driver. Ok, great, that explains why 8.2-R and 9.0-R didn't see the drives. So, I grabbed the memstick image of 8.3-RELEASE that is on the ftp server, booted it up, and sure enough, as the

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H>

Hi All, I found this issue when using asCairoDevice to transforming splom scatter plot to my RGtk2 GUI: If I put the code in R GUI or using CairoPNG or Cairo_pdf() to draw the scatter plot, I can get it correctly: The codes are: (you can copy and paste to your R GUI) super.sym <- trellis.par.get("superpose.symbol") plot.call<-splom(~iris[1:4], groups = Species, data = iris,

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi, Here i have been a matrix like this, *NAME AGE PALCE TRUE/FALSE* ABC 20 INDIA XYZ 30 FRANCE PQR 40 USA MNO 30 KENIYA DEF 25 AUSTRALIA Here,* TRUE/FALSE* Column containing empty values. So my requirement what is , need to change all the *TRUE/FALSE *column value into "*TRUE*" where *AGE =

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from