Displaying 20 results from an estimated 5000 matches similar to: "Set T38 protocol"
2010 Mar 20
1
1.6.1.18 -> 1.6.2.6 T38 Fax: call drops
Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on
1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes.
-- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009",
"/var/spool/asterisk/fax/20091113_1455.tif") in new stack
[Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error
transmitting fax. result=49: The call dropped
2009 Jun 12
0
Problems with ReceiveFAX (asterisk 1.6.0.3 and t38)
Hello users,
have been facing problems with t38 passthrough using
asterisk 1.6.0.3.
observed also that in case of SendFAX we are not having
major issues, its almost successfull.
ReceiveFAX has problems most of the time.
we have been using a ringcentral account for testing this
receivefax.
so ringcentral is trying for 3 times if the sending fax failed for
the first time.
what i observed is
2009 Apr 26
3
Digium fax force T38?
Is it possible to force T38 for all invocations ReceiveFAX() ?
Receiving fax always worked OK on Callweaver though I could put
SipT38Switchover() into the dial plan.
I can't with Digium fax, and it always fails at the point it decides to switch
to T38.
2009 Nov 12
0
[Asterisk 0013405]: [patch] T38 gateway (fwd)
testers needed
---------- Forwarded message ----------
Date: Wed, 11 Nov 2009 17:48:04 -0600
Subject: [Asterisk 0013405]: [patch] T38 gateway
A NOTE has been added to this issue.
======================================================================
https://issues.asterisk.org/view.php?id=13405
======================================================================
Reported By:
2009 Mar 16
2
t38 iax trunk
Hi all,
I have a question regarding using T38 for fax sending and here is my scenario:
fax -> SIP ATA (T38 enabled) -> Asterisk #1 -> IAX TRUNK -> Asterisk #2 -> SIP ATA (T38 enabled) -> fax
My question is, how can I know if I'm really using T38? is T38 information coming to the other side (because of SIP to IAX conversion) or just plain g711a data?
I'm using Linksys
2011 Jan 11
1
Unable to get Fax t38 working with IrisTel trunk
Hi everyone,
I have been trying to get T.38 Faxing to work with Iristel sip trunks for
last few days but havn't been sccussful. I am using Asterisk 1.6.2.8 and
SpanDSP 0.6. Here is what I see in the tcpdump capture:
1. Call come in from the trunk as regular voice call with g.711 codec
2. Asterisk answers the call and recognizes the CNG and sends the call to
fax extension
3. Eventually
2009 Jun 26
4
T38 Fax Gateway for Asterisk 1.6
Hi,
I remember seeing a T38 Gateway application for Asterisk 1.6 floating
around, but I can't seem to find it again.
Does anyone have any pointers to it? I really want to be able to send
an incoming T38 connection directly to the PSTN.
Thanks.
-- James
2010 May 02
1
working example of t38 fax w/ 1.6.2?
I can't get a test T.38 fax between 2 1.6.2 machines, using app
_fax and spandsp pre17 and 20100501. The machines can't seem to get
connected.
send side extensions.conf:
[fax-tx-test]
exten=>s,1,NoOp(Context fax-tx-test)
exten=>s,n,SendFAX(${FaxFile}.tif)
exten=>s,n,HangUp()
exten=>h,1,NoOp(FAXSTATUS: ${FAXSTATUS} FAXERROR: ${FAXERROR} FAXMODE:
${FAXMODE})
2005 Jul 18
3
does asterisk support FAX t38 protocol?
does asterisk support FAX t38 protocol?
thanks
2007 Sep 19
0
RTP Read too short with T.38
I have the following situation:
SIP Provider -> My asterisk -> SPA2102.
Time to time I recieve a lot of warnings on asterisk CLI with RTP Read too
short, after T.38 session established.
It hapens only in one direction when fax trasmited from provider to SPA2102.
I noticed, that asterisk did not pases one packet, that i include below.
Asterisk reports warning , and drops that frame
2010 Jan 04
1
Free FaxForAsterisk ReceiveFAX not working
Hello users,
Recently i have installed the free version of FaxForAsterisk and trying to
work with it by sending a fax
on T38.
My version information is as follows
i)Asterisk 1.6.0.20
ii)res_fax-1.6.0.14_1.1.6-x86_32
iii)res_fax_digium-1.6.0.14_1.1.6-i686_32
sip.conf
[general]
t38pt_udptl=yes
extensions.conf
[default]
exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call)
exten =>
2013 Nov 05
1
How to enable T.38 between SPA3102 PSTN Line port and ReceiveFAX app ?
Hello,
I've got an analog phone which is currently receiving unsollicited FAX
calls from PSTN.
For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would
let voice calls come in and out and translate incoming FAX calls to TIF
files (forwarded through email)).
My target setup is :
PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->
2006 Jul 12
1
Gnome battery and cpu speed control
hi,
I am running CENTOS 4.3 on my IBM thinkpad T30, (recently switch from Fedora
5), and would like to have the icon of my battery remaining and my cpuspeed
control.
but could not find anywhere only the klaptop_check wich i do not like too
much,
i am using acpi,
could anyone please tell which aplication do i need to install or how do i
execute it?
thanks a lot,
regards,
Guillermo Garron
2009 Dec 12
0
T38 Passthrough 1.6.1.12-rc1 Good Results
Hi All,
I've been knee deep in T38 faxing for a couple of weeks now, trying to
find a version of Asterisk that would pass through T38 with an
Audiocodes Mediant 1000 and MP203 ATA. I had problems with 1.6.0.x
through 1.6.1.10. Tested 6 different versions. Either it just would
not work or fail back to G.711, or re-invite with wrong
T38FaxMaxDatagram sizes, faxes would work one-way and not
2015 Feb 02
0
Asterisk 13, PJSIP and T38 problem
Hello,
I need help to solve a problem that I am having using Asterisk 13, PJSIP and T38.
My setup is as follows:
SIP Provider --> Asterisk 13 --> Patton --> Physical Fax
I need to get the fax directly in T38 to Patton.
The provider sends me the fax in T38.
If I receive the T38 fax on Asterisk (using an hylafax device), I can properly receive the fax.
If I send a T38 fax with Asterisk
2011 Oct 06
3
Digium FFA + Gafachi T38 outgoing issues
Hi, folks.
I'm having a heck of a time trying to get outgoing T38 faxing (I don't
need inbound right now) working with FFA and Gafachi. G711 faxing works
(as well as can be expected over the internet), but I want the higher
reliability of T38.
I'm running Asterisk 10-beta1.
When I drop my callfile in to make the call, I get this:
-- Attempting call on SIP/18884732963 at
2010 Sep 22
1
T38 and codecs negotiation
Hi,
I'm working with asterisk 1.4.35 and found an issue regarding codecs
negotiation when T38 is enabled (t38pt_udptl=yes).
In particular if the INVITE sdp contains no allowed codec the call is not
rejected with "488 - Not acceptable here" but it goes through and the 200 OK
SDP is as follows:
v=0
o=root 27285 27285 IN IP4 xxx.xxx.xxx.xxx
s=session
c=IN IP4 xxx.xxx.xxx.xxx
t=0 0
2009 Oct 06
2
T38 REINVITe issue
Hi
My call flow is
T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN
Call is placed in reverse direction - from PSTN to T38 Gateway.
T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38
2014 Sep 01
0
Asterisk 11.5.0 T38 Faxing
Hello
We are experiencing some difficulties with T38 faxing.
I have a Asterisk 11.5.0 with libss7 and Sangoma A104DE digital interface card . The operating system is Centos 6
We are using this server to terminate calls to Telco.
So calls are coming to asterisk from sip and we are sending calls to Telco with Dahdi. (It is a one way interconnection only from asterisk to telco ,not from telco to
2009 May 30
1
Problem T.38
Boa Tarde Lista.
I'm having problems in tramiss?o a fax using T.38.
My scenario is:
Asterisk 1.6.0.5
2 ATA of Intelbras 2210.
ReceiveFAX in the asterisk.
Unable to fax when it is a ATA to another user on the Asterisk means, if
I directly between the ATA works perfectly, is a step to the ATA ReceiveFAX
of Asterisk works perfect, but if I try to pass between two Branches